Products

    Pages

        CLX-1FAN4

        4 Channel Fan Speed Control Module, Single Feed

        As part of a complete Crestron lighting system, the CLX-1FAN4 fan control module provides capacitive-type speed control for up to 4 ceiling fan motors. Each channel provides 4 preset speed settings plus off and is rated for 2 Amps, with a total module rating of 8 Amps.

        As part of a complete Crestron lighting system, the CLX-1FAN4 fan control module provides capacitive-type speed control for up to 4 ceiling fan motors. Each channel provides 4 preset speed settings plus off and is rated for 2 Amps, with a total module rating of 8 Amps.

        The CLX-1FAN4 occupies a single module space in any CAEN automation enclosure. Termination of high-voltage wiring to the module is facilitated by a CLT-1FAN4 terminal block, sold separately to enable termination of the wiring anytime prior to installing the module. CLX modules are controlled by the PAC2 and PAC2M professional automation control systems via the Cresnet network. A 5-wire link provides bussing of the Cresnet and override signals between modules within an enclosure (interconnect jumpers included).

         
         
        Pyng
        Load Ratings
          Fan Control Channels 4
          Per Channel 2 Amps
          Module Total 8 Amps
          Load Types Ceiling Fan Motors
        Power Requirements
          120 Volts AC, 50/60Hz, single-phase
        Connectors on Module
          Module Interconnect (2) 5-pin 0.156 inch headers;
        Cresnet/Override interconnect ports;
        Connect to PAC2, PAC2M, CAEN-BLOCK, or adjacent CLX-Series module using interconnect cable provided
        Connections via CLT Terminal Block (sold separately)
          LINE (1) DIN rail terminal block, black, line power input
          FAN 1 - 4 (4) DIN rail terminal blocks, red, channel outputs
          N IN (1) DIN rail terminal block, white, line input neutral
          N OUT 1 - 4 (4) DIN rail terminal blocks, white, channel output neutrals
        Buttons
          SETUP Used for manual channel activation and TSID
        LED Indicators
          PWR (green) Indicates line power is applied to the LINE terminal
          NET (yellow) Indicates communication with the control system
          1 – 4 (red x4) Indicates state of each channel
          SETUP (red) Indicates unit is in setup/manual mode
        Environmental
          Temperature 32° to 104°F (0° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
        Enclosure
          Gray metal with black heat sink, surface mount module with (2) integral mounting flanges;
        Occupies 1 module space in any CAEN enclosure
        Dimensions
          Height 7.59 in (19.27 cm)
          Width 6.92 in (17.57 cm)
          Depth 3.43 in (8.70 cm)
        Weight
          3.00 lb (1.36 kg)