Products

    Pages

        GLPX

        Green Light Express® Dimming and Switching Panels – Contact Crestron for complete system design and pricing

        Green Light Express® 120- and 277-Volt dimming and switching panels that support feed-through wiring and eight to 56 circuits each.  Two-stage installation models enable the rough-in enclosure to be ordered and installed before the lay-in panel.

        Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

        Crestron Green Light Express® is a low-cost collection of dimming and switching panels with a feed-through wiring configuration.  These efficient lighting control panels are designed for use in office buildings, warehouses, parking garages, sports facilities, public spaces, and anywhere centralized dimming or switching is required. With a smaller form factor than the Crestron Green Light® Series, the Green Light Express Series is the economical solution for reliable lighting control. An extensive selection of Crestron keypads, touch screens, occupancy sensors, photosensors, shade controllers, and numerous other peripheral options afford astounding design flexibility with unparalleled capability for integration.

        The Green Light Express GLPX Series encompasses a range of switching panels that feature standard switching, heavy-duty switching, single pole relays, and double pole relays.  In addition to switching, Green Light Express panels offer dimming control for a wide variety of load types including 2-wire and 3-wire fluorescent, magnetic low-voltage, neon/cold cathode, and 0-10 Volt ballasts and drivers (4-wire).  Each GLPX Series panel supports eight to 56 circuits and a feed-through wiring configuration. With the addition of the control module, Crestron Green Light Express is a versatile, economical switching and dimming solution in any commercial application.

        GLPX-MM Two-Stage Installation models afford peace-of-mind. In two-stage installations, the rough-in enclosure is ordered and installed months in advance of the lay-in panel, allowing time for prewiring and rough-in work.  The lay-in panel is ordered separately and delivered with all of the equipment it houses already in place.  Simply lay the panel in to the previously installed enclosure to complete the installation.  This installation method ensures that delicate equipment is not disturbed or damaged during construction and pre-wiring. 

         
        Key Features
        • Crestron Green Light Express® panels for 120- or 277-Volt dimming and switching
        • 8 to 56 circuits per panel
        • Feed-through type panels
        • Field-replaceable lighting modules
        • Models with separate installations for the rough-in enclosure and the lay-in panel available
        • Factory assembled and tested
        • Up to 8, 24, 56, or 84 relays max per panel
        • UL924 listed (emergency power equipment)

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource

        Crestron, the Crestron logo, Crestron Green Light, and Crestron Green Light Express are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

         
        Load Ratings
          Switching (GLPX-SW) –
          Switch Channels 8 to 56 depending upon panel size and options, each channel phase independent
          Per Channel 16 Amps at 100 to 277 Volts AC, 50/60 Hz;
        0.5 HP at 120 Volts, 1 HP at 230 Volts, 1 HP at 277 Volts
          Load Types Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent ballast, high-intensity discharge, LED, motor
          High-Inrush Switching (GLPX-HSW) –
          Switch Channels 8 to 32 depending upon panel size and options, each channel phase independent
          Per Channel 16 Amps at 100 to 277 Volts AC, 50/60 Hz;
        0.5 HP at 120 Volts, 1 HP at 230 Volts, 1 HP at 277 Volts
          Load Types Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent ballast, high-intensity discharge, LED, motor
          Relay Lifetime 1,000,000 on/off operations at full electronic ballast load
          Heavy-Duty Switching (GLPX-HDSW) –
          Switch Channels 8 to 56 single-pole, 4 to 28 double-pole, depending upon panel size and options, each channel phase independent
          Per Channel (Single Pole Relay) 20 Amps at 120-347 Volts AC;
        0.5 HP at 125 Volts AC, 1.5 HP at 220-277 Volts AC
          Per Channel (Double Pole Relay) 20 Amps at 120-480 Volts AC;
        0.5 HP at 125 Volts AC, 1.5 HP at 220-277 Volts AC
          Load Types Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent ballast, high-intensity discharge, LED, motor, electronic ballast
          Relay Lifetime 30,000 or more on/off operations at full load
          Dimming (GLPX-2DIM8) –
          Dim Channels 8 to 24, depending upon panel size and options
          Per Feed 16 Amps at 100 to 277 Volts AC, 50/60 Hz;
        Feeds 4 channels
          Dim Load Types Incandescent, magnetic low-voltage, neon/cold cathode, 2-wire fluorescent ballast, 3-wire fluorescent ballast, LED
          Switch Load Types Incandescent, magnetic low-voltage, electronic low-voltage, neon/cold cathode, fluorescent ballast, high-intensity discharge, LED
        Lighting Protection
          Can withstand 6 kV / 3 kA surge, as per IEC 61000-4-5 and ANSI/IEEE C62.41-1991
        Testing and Compliance
          UL Listed, FCC Part 15
        Environmental
          Temperature 32° to 104° F (0° to 40° C)
          Humidity 10% to 90% RH (non-condensing)
        Enclosure
          NEMA Type 1, IP20 rated protection, for indoor use only;
        16-gauge galvanized steel, surface wall mount;
        Gray front cover with powder coated finish
        Enclosure Dimensions
          GLEX-FT-8 Height: 12-5/16 in (313 mm)
        Width: 14-1/8 in (359 mm)
        Depth: 4-3/8 in (111 mm)
          GLEX-FT-24 &
        GLEX-FT-24-MMOE
        Height: 124-1/4 in (616 mm)
        Width: 16-1/8 in (409 mm)
        Depth: 4-7/16 in (113 mm)
          GLEX-FT-56 &
        GLEX-FT-56-MMOE
        Height: 39-21/32 in (1007 mm)
        Width: 16-1/8 in (409 mm)
        Depth: 4-7/16 in (113 mm)
          GLEX-FT-84-HC &
        GLEX-FT-84-MMOE
        Height: 63 in (1600 mm)
        Width: 15-1/4 in (388 mm)
        Depth: 4-1/2 in (115 mm)
        Weight
          GLEX-FT-8 10.4 lbs (4.70 kg)
          GLEX-FT-24 &
        GLEX-FT-24-MMOE
        19.0 lbs (8.61 kg)
          GLEX-FT-24-MMP 6.0 lbs (2.72 kg)
          GLEX-FT-56 &
        GLEX-FT-56-MMOE
        28.0 lbs (12.68 kg)
          GLEX-FT-56-MMP 10.5 lbs (4.76 kg)
          GLEX-FT-84-HC &
        GLEX-FT-84-MMOE
        42.0 lbs (19.03 kg)
          GLEX-FT-84-MMP 11.0 lbs (5.00 kg)

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, visit www.crestron.com/opensource

        Crestron, the Crestron logo, Crestron Green Light, and Crestron Green Light Express are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.