Products

    Pages

        CRESCAT-IM-P-DRN-SP1000

        iMedia Cable, Low-skew CAT5e w/drain wire for iMedia and QuickMedia, plenum, 1000 ft spool

        • Low-skew CAT5e cable w/drain wire
        • Provides an easy, low-cost, single-cable wiring solution for Crestron iMedia systems
        • Includes 20 gauge drain wire for proper grounding of iMedia equipment

        CRESCAT-IM-P-DRN is a low-skew CAT5e cable designed to provide a very low-cost, single-cable solution for wiring of Crestron iMedia systems. Just a single run of CRESCAT-IM-P-DRN is all that's required between any IM transmitter and the IM receiver of a complete iMedia system, containing all audio, RGB, control, power, and ground signals within a single plenum-rated jacket.

        CRESCAT-IM-P-DRN is composed of a low-skew CAT5e and 20 gauge drain wire bonded together in a "siamese" jacket. The drain wire provides an easy means for properly grounding each component of a complete iMedia system. Foot markers are printed on the outer jacket making it easy to determine the exact length of each cable run.

        CRESCAT-IM-P-DRN is also suitable for use in the wiring of QuickMedia-based systems.

         
         
        Low-skew CAT5e
          (4) Twisted Pairs Conductors: 24 AWG x8 solid bare copper;
        Pair Colors: blue/white, orange/white, green/white, brown/white;
        Insulation: FEP, 0.005 inch nominal thickness;
        Shield: none;
        Mutual Capacitance: 14 pF/ft, nominal;
        Capacitance Unbalance: 330 pF/ft maximum;
        Velocity of Propagation: 72%;
        Conductor DC Resistance: 28.6 ohms/1000 ft maximum;
        DC Resistance Unbalance: 3% maximum;
        Delay Skew: 15 nS/100m maximum;
        Characteristic Impedance: 100 ohms ±15% (0.772 to 100 MHz)
          Outer Jacket Color: Blue w/white stripe and text;
        Jacket: Material: Low-smoke PVC;
        Thickness: 0.018 inch;
        Ripcord: yes;
        Outer Diameter: 0.248 inch nominal
        Drain
          (1) Drain Wire Conductor: 20 AWG solid bare copper
          Jacket Color: Blue;
        Material: Low-smoke PVC;
        Outer Diameter: 0.185 inch nominal
        Overall
          Composite Construction "Siamese" parallel extruded
          Outer Diameter 0.248 x 0.433 inch nominal
        Mechanical
          Maximum Tensile Load 25 lbf (111 N) for installation
          Minimum Bend Radius 2.0 in (5.1 cm)
        Environmental
          Operating Temperature +14° to +140°F (-10° to +60°C)
          Installation Temperature +32° to +122°F (0° to +50°C)
        Weight
          30 lb/1000 ft (45 kg/km) nominal
        Rating
          NEC Article 800; UL Subject 444, Type CMP; CSA Type CMP; NFPA 262; CSA FT6 (Steiner Tunnel test)