Products

    Pages

        DM-RPP-K24

        DigitalMedia™ 24-Port Keystone Patch Panel

        Provides an enterprise-grade signal routing solution for DM®, HDBaseT®, and Ethernet networks.

        The DigitalMedia™ 24-Port Keystone Patch Panel (DM-RPP-K24) provides an enterprise-grade network routing solution that is designed in accordance with EIA/TIA specifications for use as part of a complete DM®, HDBaseT®, or Ethernet infrastructure. It can be populated with up to 24 DigitalMedia Ultra Keystone RJ45 Jacks (model DM-CONN-ULTRA-RECP [1]), which provide front-facing RJ45 patch ports with rear-facing termination points for Crestron DM 8G® and DM Ultra Cable (or third-party CAT5e, CAT6, and CAT6a cabling). The complete solution enables the routing of data and AV signals by simply patching any two RJ45 jacks together using a DigitalMedia Ultra Patch Cable (model DM-CBL-ULTRA-PC [1]).

        The DM-RPP-K24 is an empty patch panel frame with 24 keystone module positions. Each position accommodates a single DigitalMedia Ultra Keystone RJ45 Jack, which simply snaps into place without any tools. Integrated grounding tabs engage firmly with the jack’s solid metal housing to ensure proper shielding against outside interference. Individual cable tie points at the rear of the patch panel provide secure strain relief for each cable using cable ties (provided). A ground lug terminal is also included, which can be positioned on the rear at the left or right end.

        The DM-RPP-K24 is also compatible with most third-party keystone modules, allowing full customization using a variety of connector types to suit any application. It occupies a single rack space when installed in a 19 inch data center rack or AV equipment rack. Front panel label strips allow for the designation of each patch port using paper or standard 1/2 inch (12 mm) tape labels.

        Crestron DigitalMedia (DM) products are engineered in accordance with the standards and practices established by the IT and structured cabling industries. DM technology exists as an integral part of an organization’s IT network infrastructure, facilitating the distribution of 10 Gigabit Ethernet and IP streaming signals, as well as point-to-point 4K ultra high-definition AV signals. Crestron offers end-to-end networking solutions comprised of a complete family of Ethernet and DM switches, patch panels and jacks, PoE and PoDM power supplies, streaming encoders and decoders, HDBaseT and DM 8G+® transmitters and receivers, and high-bandwidth CAT5e and CAT7a cable and connectors.

        Please refer to the DM-CONN-ULTRA-RECP spec sheet for additional details.

        Please refer to the DigitalMedia Resources Webpage at http://www.crestron.com/dmresources/ for additional design tools and reference documents.

         
        Key Features
        • Enterprise-grade patch panel frame
        • 24 keystone module openings
        • Shielded CAT6a RJ45 jacks sold separately
        • Designed for 10GBase-T Ethernet, Crestron DM 8G+®, and HDBaseT®
        • Compatible with Crestron® DM 8G® and DM® Ultra cable
        • Field-terminable
        • Individual rear cable tie points
        • Versatile ground lug placement
        • Customizable front panel labeling
        • Single-space 19” rack-mountable
        • Patch cables available separately
        1. Item(s) sold separately.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, DigitalMedia, DigitalMedia 8G, DM, and DM 8G+ are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.  HDBaseT is either a trademark or registered trademark of the HDBaseT Alliance in the United States and/or other countries.  Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

         
        4K
          Please refer to the DM-CONN-ULTRA-RECP spec sheet for additional specifications.
        Connectors
          1 – 24 (24) Keystone module positions (empty)
          Ground (1) Ground lug;
        Attaches at left or right end of rear panel;
        Wire Size: Accept up to 12 AWG (4 mm²)
        Environmental
          Temperature 14° to 140°F (-10° to 60°C)
        Construction
          Chassis Steel, black finish
          Mounting 1 RU 19-inch rack-mountable
        Dimensions
          Height 1.74 in (45 mm)
          Width 19.00 in (483 mm)
          Depth 4.22 in (107 mm)
        Weight
          31 oz (862 g) without modules
        1. Item(s) sold separately.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, DigitalMedia, DigitalMedia 8G, DM, and DM 8G+ are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.  HDBaseT is either a trademark or registered trademark of the HDBaseT Alliance in the United States and/or other countries.  Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.