Products

    Pages

        DM-CBL-ULTRA-PC-1.5

        DigitalMedia™ Ultra Patch Cable, 1.5 ft (0.45 m)

        Fully-shielded CAT6a patch cables for use with Crestron® DM 8G+®, HDBaseT®, and 10GBase-T Ethernet.

        The DM-CBL-ULTRA-PC is a shielded CAT6a patch cable designed for use with all Crestron® DigitalMedia 8G+® (DM 8G+®) products, as well as HDBaseT® and 10GBase-T Ethernet. Using the DM-CBL-ULTRA-PC in combination with other Crestron DM® Ultra structured cabling products ensures the highest performance and reliability for distributing Ethernet data and uncompressed 4K/60 video.

        The DM-CBL-ULTRA-PC is the ultimate Category 6A patch cable. Its innovative PCB-based plug design optimizes signal tuning for exceptional transmission. Advanced contact technology provides decreased variability and greater reliability over traditional crimp-type plugs. Category 7 S/FTP stranded cable is used to enable optimal transmission performance while eliminating alien crosstalk. Every DM Ultra patch cable is 100% factory tested to ensure full performance and compliance.

         
        Key Features
        • Fully-shielded CAT6a patch cable
        • Unique PCB-based RJ45 plug design
        • 360 degree shield coverage
        • Low-profile, snag-resistant boot design
        • Robust strain and bend relief
        • Cantilevered latch for enhanced accessibility
        • High-performance CAT7 S/FTP stranded cable
        • Alien crosstalk preventive construction
        • Ultimate performance for 10GBase-T Ethernet, HDBaseT®, and Crestron® DM 8G+®
        • Sold in eight lengths from 1.5 to 50 ft (0.45 to 15 m)
        • 100% factory tested

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, DigitalMedia, DigitalMedia 8G+, DM, and DM 8G+ are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.  HDBaseT is either a trademark or registered trademark of the HDBaseT Alliance in the United States and/or other countries.  Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2016 Crestron Electronics, Inc.

         
        4K
        Electrical
          Compatibility CAT5e, CAT6, CAT6a
          Contact Resistance 10 mΩ
          Input to Output Resistance 200 mΩ
          Insulation Resistance 500 mΩ
          Dielectric Withstand Voltage 1000 Volts DC or AC peak minimum contact to contact
          Current Rating 1.5 Amps
          PoE Compatibility IEEE 802.3at PoE & PoE+
          Surface Transfer Impedance <10 mΩ/m @ 10 MHz
        Mechanical – Plug
          Jack Compatibility RJ45
          Insertion Cycles 2500 minimum
          Retention Force 50 N minimum
          Tensile Strength 20 lb minimum cable to plug
        Mechanical – Cable
          Construction S/FTP
          Wiring Standards TIA/EIA T568A & T568B
          Conductors 26 AWG (0.14 mm²) 7x32 stranded tinned copper
          Jacket Type CM, LSZH
          Jacket Color Blue
          Overall Outer Diameter 0.25 in (6.35 mm) nominal
          Bend Radius 2 in (50 mm)
        Mechanical – General
          Plug Housing Material Polycarbonate
          Contact Materials 50 microinches gold plating or equivalent
          Plastic Materials Flame retardant thermoplastic
          Flammability Rating UL 94V-0
          Green Features RoHS, lead-free, halogen-free, PVC free
          Shielding 360 degree coverage
        Environmental
          Temperature 14° to 140°F (-10° to 60°C)
        Compliance
          ANSI/TIA-568-C.2, ISO/IEC 11801 Ed 2.2, IEEE 802.3an, IEEE 802.3af, IEEE 802.3at, ANSI/TIA 1096-A, IEC 60603-7-51, UL 1863 and CSA-C22.2 No. 182.4-M90, IEC 60332-1, IEC 60754, IEC 61034, Anatel Resolution No.242,2000

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, DigitalMedia, DigitalMedia 8G+, DM, and DM 8G+ are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.  HDBaseT is either a trademark or registered trademark of the HDBaseT Alliance in the United States and/or other countries.  Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2016 Crestron Electronics, Inc.