Products

    Pages

        CBLRAI-BRKT-4-FT

        Cable Retractor Mounting Bracket for International FlipTops™

        Mounts in a Crestron® FlipTop™ to enable the installation of cable retractors.NOTE: Not required for FlipTop 600 Series.

        These mounting brackets are designed for use with Crestron® FlipTops™ and Cable Retractors. A single bracket accommodates up to three or four cable retractors depending on the FlipTop™ model (see specifications for quantity and compatibility). Spacer inserts are available to fill any unused cable retractor spaces.[1]

        Note: 600 Series FlipTops do not require these brackets.

        Each CBLRA-BRKT-FT model is designed for mounting the cable retractors in a vertical orientation. In this orientation, the retractors hang from the bottom of the FlipTop box allowing them to be hidden in a pedestal leg or similar space directly beneath the FlipTop.

        Horizontal orientation is also possible by adding the CBLRA-BRKT-H Horizontal Mounting Option[2]. Using this option, the cable retractors can be attached to the underside of the tabletop.

        Please refer to the CBLR Cable Retractors spec sheet for additional information.

         
        1. When installing fewer than the maximum quantity of cable retractors, a spacer insert is required to fill each unused cable retractor space. For FlipTop 600 Series, use the FTA-CBLRA-INSERT-2WIRE-102. For all other FlipTops, use the CBLRA-INSERT-2WIRE or CBLRA-INSERT-BLANK. All spacer inserts are sold separately.
        2. Item sold separately.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Crestron, the Crestron logo, FlipTop, and FlipTops are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2014 Crestron Electronics, Inc.

         
        FlipTop™ Compatibility
          FlipTop Models Cable Retractors
        Max. Quantity[1]
        Required "FT" Bracket Horizontal "H" Bracket
        Option[2]
          C2N-FTB-D
        FT-PWR-D
        QM-FTCC
        QM-FTCC-NB
        QM-FTDC
        QM-FTDC-NB
        QM-FTMC
        QM-FTMC-NB
        QM-FTMCSC
        QM-FTMCSC-NB
        3 CBLRA-BRKT-3-FT CBLRA-BRKT-3-H
          C2N-FT-TPS4
        C2N-FT-TPS4-U
        FT-PWR-D-LG
        QM-FTCC-TPS4
        4 CBLRA-BRKT-4-FT CBLRA-BRKT-4-H
          FTI-PWR-D
        QMI-FTCC
        QMI-FTDC
        QMI-FTMC
        QMI-FTMCSC
        4 CBLRAI-BRKT-4-FT CBLRA-BRKT-4-H
          FT-600
        FT-TS600
        FT-TSC600
        3
        (one side only)
        Not Required CBLRA-BRKT-3-H
          FT-600
        FT-TS600
        FT-TSC600
        6 Not Required CBLRA-BRKT-3-H
        Qty. 2 Required
          IM-FTCC-M
        IM-FTCCV-M
        IMI-FTCC-M
        IMI-FTCCV-M
        QMI-FTCC-TPS4
        0
        (not supported)
        N/A N/A
        Construction
          Metal, black
        Dimensions – CBLRA-BRKT-3-FT
          Height 2.83 in (72 mm)
          Width 5.48 in (140 mm)
          Depth 2.95 in (75 mm)
        Dimensions – CBLRA-BRKT-4-FT
          Height 2.79 in (71 mm)
          Width 6.34 in (162 mm)
          Depth 3.30 in (84 mm)
        Dimensions – CBLRAI-BRKT-4-FT
          Height 2.79 in (71 mm)
          Width 7.17 in (183 mm)
          Depth 3.21 in (82 mm)
        Weight
          CBLRA-BRKT-3-FT 10.4 oz (295 g)
          CBLRA-BRKT-4-FT 12.0 oz (341 g)
          CBLRAI-BRKT-4-FT 13.5 oz (383 g)
        1. When installing fewer than the maximum quantity of cable retractors, a spacer insert is required to fill each unused cable retractor space. For FlipTop 600 Series, use the FTA-CBLRA-INSERT-2WIRE-102. For all other FlipTops, use the CBLRA-INSERT-2WIRE or CBLRA-INSERT-BLANK. All spacer inserts are sold separately.
        2. Item sold separately.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Crestron, the Crestron logo, FlipTop, and FlipTops are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2014 Crestron Electronics, Inc.