Products

    Pages

        HD-RX3-C-B

        4K HDMI® over HDBaseT® Receiver, Black

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        Provides a very simple and reliable solution for extending uncompressed ultra high-definition video and audio signals up to 330 feet (100 meters) over a single CAT type twisted pair cable. Enables the connection of an HDMI® or DVI display device to an HDBaseT® source. Supports Full HD, Ultra HD, 2K, and 4K video resolutions.

        The Crestron® 4K HDMI® over HDBaseT® Receiver (HD-RX3-C) delivers a professional-grade digital HD AV signal extension solution for use in the home, classroom, auditorium, or corporate boardroom. Without any special setup or configuration, the HD-RX3-C connects directly to an HDBaseT source, enabling the transmission of ultra high-definition digital video and audio over wire runs up to 330 feet (100 meters) using a single CAT type twisted pair cable.[1]

        NOTE: When paired with the HD-TX3-C transmitter[2], the HD-RX3-C provides a very simple point-to-point solution for extending HDMI along with RS-232 and IR control signals[3]. For applications using the HD-RX3-C and HD-TX3-C together, please refer to the HD-EXT3-C.

        4K Ultra HD Signal Extension

        Using HDBaseT technology, the HD-RX3-C allows for the extension of uncompressed HDMI signals over a single CAT type twisted pair cable. In addition to HDMI, it is also compatible with DVI.[4]. Without relying on signal-degrading compression or inferior HDMI signal boosting, HDBaseT reliably transports the full resolution signal from source to display — intact and uncompromised.

        The HD-RX3-C handles uncompressed Full HD 1080p, Ultra HD, 2K, and 4K video signals with support for 3D, Deep Color, and HDCP. Audio capabilities include support for high-bitrate 7.1 audio formats like Dolby® TrueHD and DTS-HD Master Audio™ as well as uncompressed linear PCM. All signals are transported over a single CAT type cable, supporting 1080p, WUXGA, and 2K signals at distances up to 330 feet (100 m) using Crestron DM® Ultra or DM 8G® Cable, or third-party CAT5e. Higher resolutions up to UHD and 4K are supported at distances up to 330 feet (100 m) using DM Ultra Cable, 230 feet (70 m) using DM 8G Cable, or 165 feet (50 m) using CAT5e.[1]

        ...And Control Too!

        When paired with an HD-TX3-C transmitter, the HD-RX3-C provides for the extension of IR and bidirectional RS-232 control signals in addition to video and audio.[3]

        HDBaseT® Certified

        Crestron HDMI over HDBaseT products are designed using HDBaseT Alliance specifications, ensuring interoperability with other HDBaseT certified products. Via its HDBaseT input, the HD-RX3-C can be connected directly to an HDBaseT compliant source without requiring a separate transmitter.

        Uncompromised and Uncomplicated

        Crestron HDMI over HDBaseT products afford a very dependable signal extension solution that’s simple to implement. No special configuration or programming is required — just connect your source and display and enjoy high-quality video and audio from across the room — or the other end of the house.

        The HD-RX3-C can be mounted discreetly behind a display device or wherever else it needs to go. Linking the HD-RX3-C to an HDBaseT source, or to the HD-TX3-C transmitter[2], requires just one CAT type cable[1]. Crestron offers the cable and connectors for a complete, easy, and reliable wiring solution. A range of professional AV interface cables and wall plates is also available to complement the HD-RX3-C for a total custom installation solution.

         
        Key Features
        • HDBaseT® Certified 4K Ultra HD signal extender
        • Extends uncompressed digital video and audio over a single CAT type twisted pair cable [1]
        • Supports cable lengths up to 330 ft (100 m) for all resolutions up to 4K and Ultra HD using DM® Ultra cable [1]
        • Supports cable lengths up to 330 ft (100 m) for 1080p, WUXGA, and 2K using DM 8G® cable or CAT5e [1]
        • Supports cable lengths up to 230 ft (70 m) for 4K and UHD using DM 8G cable, or 165 ft (50 m) using CAT5e [1]
        • Compatible with HDBaseT sources [3]
        • Compatible with HDMI® and DVI display devices [4]
        • Supports Dolby® TrueHD, DTS-HD®, and uncompressed 7.1 linear PCM audio
        • HDCP compliant
        • Passes CEC and EDID
        • Enables IR and RS-232 signal extension when paired with an HD-TX3-C [2,3]
        • 24VDC power pack included
        • No programming or configuration required
        1. The maximum cable length for HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum HDBaseT Cable Lengths” table for a detailed overview. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. All wire and cables are sold separately.
        2. HD-TX3-C sold separately or as part of the HD-EXT3-C 4K HDMI over HDBaseT Extender package.
        3. IR and RS-232 control signals are only supported when paired with an HD-TX3-C transmitter.
        4. HDMI requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are available separately.
        5. When the HD-RX3-C receiver is connected to a HD-TX3-C transmitter, only one power pack should be connected to either the receiver or the transmitter, not both. Power is passed to the secondary device via the HDBaseT connection. Please note, the HD-RX3-C and HD-TX3-C are not PoH compatible. They cannot be powered by, or supply power to, another HDBaseT device. They may however be connected to such devices without risk of malfunction.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Crestron, the Crestron logo, DigitalMedia, DigitalMedia 8G, DM, and DM 8G are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDBaseT and the HDBaseT Alliance logo are either trademarks or registered trademarks of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

         
        Maximum HDBaseT® Cable Lengths
            Cable Type:
           
        Resolution:
        DM-CBL-ULTRA
        DigitalMedia™ Ultra Cable
        DM-CBL-8G
        DigitalMedia 8G™ Cable
        CAT5e (or better)
        UTP or STP
        [1]
          1080p60 Full HD 330 ft (100 m) 330 ft (100 m) 330 ft (100 m)
          1920x1200 WUXGA
          1600x1200 UXGA
          2048x1080 2K DCI
          2560x1440 WQHD 230 ft (70 m) 165 ft (50 m)
          2560x1600 WQXGA
          3840x2160 Ultra HD
          4096x2160 4K DCI
        Video
          Input Signal Types HDBaseT
          Output Signal Types HDMI®, DVI[4]
          Formats HDMI & HDBaseT w/Deep Color, 3D, & 4K; DVI; HDCP content protection support
          Maximum Resolutions Scan Type Maximum Resolution Frame Rate Color Sampling
          Progressive 4096x2160 4K DCI Up to 24 Hz 4:4:4
          Progressive 3840x2160 Ultra HD Up to 30 Hz 4:4:4
          Progressive 2560x1600 WQXGA Up to 60 Hz 4:4:4
          Progressive 4096x2160 4K DCI Up to 60 Hz 4:2:0
          Progressive 3840x2160 Ultra HD Up to 60 Hz 4:2:0
          Interlaced 1920x1080 1080i30 Up to 30 Hz 4:4:4
          NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
        Audio
          Input Signal Types HDBaseT
          Output Signal Types HDMI
          Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, up to 8ch PCM
        Communications
          RS-232 Extends 2-way serial device control signals up to 115.2k baud [3]
          IR Extends 1-way IR device control signals up to 455 kHz [3]
          HDBaseT Passes HDCP, EDID, & CEC
          HDMI Passes HDCP, EDID, & CEC
        Connectors
          IR OUT (1) 2-pin 3.5mm detachable terminal block;
        IR repeater output port [3];
        IR output up to 455 kHz
          COM (1) 3-pin 3.5mm detachable terminal block;
        Bidirectional RS-232 port [3];
        Up to 115.2k baud, software handshaking support
          G (1) 6-32 screw, chassis ground lug
          HDMI OUT (1) 19-pin Type A HDMI female;
        HDMI digital video/audio output;
        Also supports DVI [4]
          HDBaseT IN (1) 8-pin RJ45 female, shielded;
        Connects to the HDBaseT OUT port of an HD-TX3-C transmitter or other HDBaseT device via CAT5e, Crestron DM-CBL-8G, or Crestron DM-CBL-ULTRA cable [1]
          PWR 24VDC 0.75A (1) 2.1 x 5.5 mm DC power connector;
        24 Volt DC power input (PW-2407WU power pack included) [5]
        Indicators
          PWR (1) green LED, indicates operating power supplied via local power pack or HD-TX3-C
          HDBaseT IN (2) LEDs, green LED indicates link status, amber LED indicates video and HDCP signal presence
        Power Requirements
          Power Pack 0.75 Amp @ 24 Volts DC;
        100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU, included [5]
        Environmental
          Temperature 32° to 104°F (0° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 11 BTU/hr
        Enclosure
          Construction Aluminum w/polycarbonate label overlay and (4) integral mounting flanges
          Mounting Freestanding, surface mount, or attach to a single rack rail
        Dimensions
          Height 1.43 in (37 mm)
          Width 3.91 in (100 mm)
          Depth 4.70 in (120 mm)
        Weight
          11.6 oz (330 g)
        1. The maximum cable length for HDBaseT is dependent upon the type of cable and resolution of the video signal. Refer to the “Maximum HDBaseT Cable Lengths” table for a detailed overview. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. All wire and cables are sold separately.
        2. HD-TX3-C sold separately or as part of the HD-EXT3-C 4K HDMI over HDBaseT Extender package.
        3. IR and RS-232 control signals are only supported when paired with an HD-TX3-C transmitter.
        4. HDMI requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are available separately.
        5. When the HD-RX3-C receiver is connected to a HD-TX3-C transmitter, only one power pack should be connected to either the receiver or the transmitter, not both. Power is passed to the secondary device via the HDBaseT connection. Please note, the HD-RX3-C and HD-TX3-C are not PoH compatible. They cannot be powered by, or supply power to, another HDBaseT device. They may however be connected to such devices without risk of malfunction.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Crestron, the Crestron logo, DigitalMedia, DigitalMedia 8G, DM, and DM 8G are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD, and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDBaseT and the HDBaseT Alliance logo are either trademarks or registered trademarks of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.