Products

    Pages

        HD-EXT1-C

        HDMI® over Shielded Twisted Pair Extender

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        Provides a very simple and reliable solution for extending uncompressed HDMI and control signals up to 100 meters (330 ft) over a single shielded twisted-pair cable.

        This product has been replaced by the HD-EXT3-C.

        The Crestron® HDMI over Shielded Twisted Pair Extender (HD-EXT1-C) delivers professional-grade digital HD AV signal extension for use in the home, classroom, auditorium, or corporate boardroom. Without any special setup or configuration, the HD-EXT1-C enables wire runs up to 100 meters (330 feet) over a single, low-cost shielded twisted-pair (STP) cable[1]. It simultaneously handles high-definition digital video and audio, RS-232, and IR signals.

        Robust HD Signal Extension

        Based on our groundbreaking DigitalMedia 8G technology, Crestron HDMI over STP delivers ultra-reliable extension of uncompressed HDMI signals over any distance up to 100 m (330 ft). Without relying on signal-degrading compression or IP streaming, Crestron HDMI over STP technology transports the full HD signal to your display — intact and uncompromised.

        The HD-EXT1-C handles HD video resolutions up to 1080p60, and high-res computer resolutions up to UXGA and WUXGA, with full support for HDCP, 3D, Deep Color, and 7.1 HD audio. It is also compatible with DVI and DisplayPort Multimode sources, and DVI display devices, using appropriate adapters or interface cables[2].

        ...And Control Too!

        In addition to video and audio, the HD-EXT1-C provides for the extension of IR and bidirectional RS-232 control signals for a true one-wire AV interface solution.

        Uncompromised and Uncomplicated

        Crestron HDMI over STP affords a very dependable signal extension solution that's simple to implement. No special configuration or programming is required — just connect your source and display and enjoy high-quality HD video and audio from across the room — or the other end of the house.

        The HD-EXT1-C is composed of one transmitter and one receiver (HD-TX1-C and HD-RX1-C, both included). The transmitter can be mounted in a single-gang wall box, or attached to any flat surface or inside an equipment rack. The compact receiver can be mounted discretely behind a display device or wherever else it needs to go. Linking the two components requires just one run of Crestron DM-CBL-8G shielded twisted-pair cable[1]. Crestron offers the cable, connectors, and crimp tool for a complete, easy wiring solution. A range of professional AV interface cables and wall plates is also available to complement the HD-EXT1-C for a total custom installation solution.

         
        Key Features
        • Extends uncompressed digital video, audio, and control signals 100 meters over a single shielded twisted-pair cable[1]
        • Based on professional-grade DigitalMedia 8G technology
        • Works reliably without any programming or configuration
        • Supports HDMI with Deep Color and 3D
        • Supports 7.1 channel HD lossless audio
        • Also compatible with DVI and DisplayPort components[2]
        • Handles resolutions up to 1920x1200 and 1080p60
        • Passes CEC, EDID and HDCP
        • Includes universal IR repeater up to 455 kHz
        • Extends bidirectional RS-232 up to 115.2k Baud
        • 24VDC power pack included[3]
        1. For connection between the HD-TX1-C Transmitter and HD-RX1-C Receiver (both included), use Crestron DM-CBL-8G or DM-CBL-D cable (sold separately). The maximum cable length is 330 ft (100 m) using DM-CBL-8G, or 200 ft (61 m) using DM-CBL-D. Do not connect the AV IN or AV OUT ports to a DigitalMedia or DigitalMedia 8G network or device, or to any other network or device.
        2. HDMI IN requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort Multimode signal. HDMI OUT requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables available separately.
        3. The power pack must be connected to either the HD-TX1-C Transmitter or HD-RX1-C Receiver, not both. Power is passed to the secondary device via the AV IN/OUT connection.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        Crestron, the Crestron logo, DigitalMedia, DigitalMedia 8G, DM, and DM 8G are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Dolby, Dolby Digital, and the double-D symbol are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD Master Audio, and the DTS logos and Symbol are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others. ©2011 Crestron Electronics, Inc.

         
        Video
          Input Signal Types HDMI, DVI[2], DisplayPort Multimode[2]
          Output Signal Types HDMI, DVI[2]
          Formats HDMI w/Deep Color & 3D, DVI, HDCP content protection support
          Input Resolutions, Progressive 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock
          Input Resolutions, Interlaced 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock
          Output Resolutions Matched to input
        Audio
          Input Signal Types HDMI, DisplayPort Multimode[2]
          Output Signal Types HDMI
          Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, Up to 8ch PCM
        Communications
          RS-232 Extends 2-way serial device control signals up to 115.2k baud
          IR Extends 1-way IR device control signals up to 455 kHz
          AV link 8 Gigabit digital AV & control over shielded twisted-pair cable, up to 100 m (330 ft) cable length[1]
        Connectors – HD-TX1-C Transmitter
          HDMI IN (1) 19-pin Type A HDMI female;
        HDMI digital video/audio input;
        Also supports DVI or Displayport Multimode[2]
          IR IN (1) 2-pin 3.5mm detachable terminal block;
        IR repeater input port;
        IR signal input up to 455 kHz
          COM (1) 3-pin 3.5mm detachable terminal block;
        Bidirectional RS-232 port;
        Up to 115.2k baud, software handshaking support
          24VDC 0.75A (rear) (1) 2.1mm barrel DC power jack;
        24 Volt DC power input (PW-2407WU power pack included)[3]
          Ground (rear) (1) Flying lead, chassis ground connection
          AV OUT (rear) (1) 8-pin RJ45 female, shielded;
        Connects to AV IN port of the HD-RX1-C receiver via DM-CBL-8G cable[1]
        Connectors – HD-RX1-C Receiver
          IR OUT (1) 2-pin 3.5mm detachable terminal block;
        IR repeater output portIR output up to 455 kHz
          COM (1) 3-pin 3.5mm detachable terminal block;
        Bidirectional RS-232 port;
        Up to 115.2k baud, software handshaking support
          G (1) 6-32 screw, chassis ground lug
          HDMI OUT (1) 19-pin Type A HDMI female;
        HDMI digital video/audio output;
        Also supports DVI[2]
          AV IN (1) 8-pin RJ45 female, shielded;
        Connects to AV OUT port of the HD-TX1-C transmitter via DM-CBL-8G cable[1]
          PWR 24VDC 0.75A (1) 2.1mm barrel DC power jack;
        24 Volt DC power input (PW-2407WU power pack included)[3]
        Controls & Indicators – HD-TX1-C Transmitter
          PWR/LINK (1) dual-color amber/green LED, indicates operating power supplied via AV link or local power pack[3], and indicates AV link status and HDMI input signal presence
          AV OUT (rear) (2) LEDs, green LED indicates AV link status, amber LED indicates video and HDCP signal presence
          SW1 (side) (1) DIP slide switch, enables hot plug detect
        Indicators – HD-RX1-C Receiver
          PWR (1) green LED, indicates operating power supplied via AV link or local power pack[3]
          AV IN (2) LEDs, green LED indicates AV link status, amber LED indicates video and HDCP signal presence
        Power Requirements
          Power Pack 0.75 Amp @ 24 Volts DC;
        100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU, included[3]
        Environmental
          Temperature 32° to 104°F (0° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation HD-TX1-C: 2 BTU/hr;
        HD-RX1-C: 11 BTU/hr
        Enclosure – HD-TX1-C Transmitter
          Construction Metal, black finish w/polycarbonate label overlay
          Flush Wall Mount 1-gang mountable in an extra-deep electrical box (2-1/2 inch deep minimum), requires decorator style faceplate (not included)
          Surface Mount Surface mount bracket included
          Rack Mount Attachable to a single 19-inch EIA rack rail
        Enclosure – HD-RX1-C Receiver
          Construction Aluminum w/polycarbonate label overlay and (4) integral mounting flanges
          Mounting Freestanding, surface mount, or attach to a single rack rail
        Dimensions
          HD-TX1-C Transmitter Height: 4.12 in (105 mm);
        Width: 1.72 in (44 mm);
        Depth: 2.33 in (60 mm)
          HD-RX1-C Receiver Height: 1.43 in (37 mm);
        Width: 3.91 in (100 mm);
        Depth: 4.70 in (120 mm)
        Weight
          HD-TX1-C Transmitter 5.8 oz (165 g)
          HD-RX1-C Receiver 11.6 oz (330 g)
        1. For connection between the HD-TX1-C Transmitter and HD-RX1-C Receiver (both included), use Crestron DM-CBL-8G or DM-CBL-D cable (sold separately). The maximum cable length is 330 ft (100 m) using DM-CBL-8G, or 200 ft (61 m) using DM-CBL-D. Do not connect the AV IN or AV OUT ports to a DigitalMedia or DigitalMedia 8G network or device, or to any other network or device.
        2. HDMI IN requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort Multimode signal. HDMI OUT requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables available separately.
        3. The power pack must be connected to either the HD-TX1-C Transmitter or HD-RX1-C Receiver, not both. Power is passed to the secondary device via the AV IN/OUT connection.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        Crestron, the Crestron logo, DigitalMedia, DigitalMedia 8G, DM, and DM 8G are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and other countries. Dolby, Dolby Digital, and the double-D symbol are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS-HD Master Audio, and the DTS logos and Symbol are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others. ©2011 Crestron Electronics, Inc.