Products

    Pages

        DMC-CATO

        Quad DM CAT Output Card for DM-MD8X8

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        Provides four (4) DM CAT outputs for the DM-MD8X8 DigitalMedia™ Switcher.

        For a substitute, please see the DMCO-22.

        The DMC-CATO is an output card for a Crestron DM-MD8X8 DigitalMedia™ Switcher, providing four DigitalMedia (DM) CAT outputs to feed up to four individual DM receivers via CAT5e/6 or DigitalMedia cable*.

        * For DigitalMedia CAT wiring, use DM-CBL DigitalMedia Cable, CresCAT-D, or quality CAT5e/CAT6 cable. Do NOT use low-skew cable. The maximum allowable cable length depends on multiple factors. One or more DM Repeaters (Model DM-DR) may be required. Refer to the Crestron DigitalMedia Design Guide, Doc. #4789 for complete wiring guidelines.

         
         
        Connectors
          DM 1 – 4 (4) DM CAT outputs, each composed of (2) 8-pin RJ45 female, shielded;
        Connect to DM CAT inputs of DM receivers/room controllers or other DM devices via DM-CBL or CresCAT-D cable*
        Construction
         

        Plug-in card, occupies (1) DM-MD8X8 switcher output card slot, includes steel faceplate w/black matte powder coat finish

        Weight
         

        11.5 oz (326 g)

        * For DigitalMedia CAT wiring, use DM-CBL DigitalMedia Cable, CresCAT-D, or quality CAT5e/CAT6 cable. Do NOT use low-skew cable. The maximum allowable cable length depends on multiple factors. One or more DM Repeaters (Model DM-DR) may be required. Refer to the Crestron DigitalMedia Design Guide, Doc. #4789 for complete wiring guidelines.