Products

    Pages

        CLW-DIMSA-S

        Wall Box Dimmer, Slave-Capable, 3 Button, Almond, Smooth

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        The CLW-DIMS is a 1000 Watt incandescent dimmer designed to mount in a standard electrical gang box and serve as the master for multipoint dimming control of a single load. Multipoint dimming functionality (similar to 3-way or 4-way switching) is enabled using one CLW-DIMS along with one or more CLW-SLVD Slave Dimmers.

        For a replacement product, please see the CLW-DIMSWEX.

        The CLW-DIMS is a 1000 Watt incandescent dimmer designed to mount in a standard electrical gang box and serve as the master for multipoint dimming control of a single load. Multipoint dimming functionality (similar to 3-way or 4-way switching) is enabled using one CLW-DIMS along with one or more CLW-SLVD Slave Dimmers.

        Although functional as a standalone dimmer, the CLW-DIMS delivers greatly enhanced functionality as part of a complete Crestron Home® automation system. Designed to replace any standard in-wall dimmer or light switch, the CLW-DIMS connects to Crestron's PAC2 and PAC2M automation control systems (or any other 2-Series control system) via the Cresnet network to enable extensive automation and control capability.

        The CLW-DIMS supports incandescent loads up to 1000 Watts, or magnetic low-voltage loads up to 1000VA/750 Watts. Multiple units may be ganged side-by-side along with other CLW-Series dimmers and switches or non-Crestron devices. (Note: Ganging the CLW-DIMS typically requires the removal of the side heat sink fin on one or both sides of the unit resulting in a derating of its load capacity; see specifications below.) CLW-Series components are available in white, black, and almond and are designed for use with decorator style faceplates (not included).

        The three pushbuttons on the CLW-DIMS provide versatile lighting control with up to four possible dimming level presets. The slide switch selects between ADJUST, PRESET, and OFF modes. Dimming levels can be manually adjusted, stored, and recalled using the ADJUST and PRESET modes. Switching to the OFF mode completely disables the dimmer and disconnects all power to the load. A dual purpose LED is included to verify preset storage and serve as a beacon to make the dimmer easy to locate in the dark.

        Its connection to the control system allows the functions of the CLW-DIMS to be controlled from touchpanels, keypads, wireless remotes, and computers to support unlimited flexibility for remote control and integration with other devices and systems in the home or office. In the event that communication with the control system is disrupted for any reason, the CLW-DIMS will remain operable to control the lighting circuit.

         
         
        Load Ratings
          Incandescent/Tungsten Halogen 1000 Watts;
        600 Watts, one side fin removed;
        400 Watts, both side fins removed
          Magnetic Low Voltage 1000VA/750 Watts;
        600VA/450 Watts, one side fin removed;
        400VA/300 Watts, both side fins removed
        Power Requirements
          120 Volts AC, 60Hz, line power
        Controls
          Large Button Initiates on/off or preset #1 high/low levels
          Left Small Button Lowers dimming level, initiates preset level #2
          Right Small Button Raises dimming level, initiates preset level #3
          Mode 3-position slide switch; selects PRE, ADJ, or OFF mode
        LED Indicator
          (1) Amber LED, flashes when a preset has been stored;
        Visibly signals location in the dark
        Connections
          Cresnet (3) Class 2 flying leads;
        Isolated 2-wire non-polarized Cresnet port;
        Connect to Cresnet control network via Cresnet-DM cable
          Hot (1) Class 1 flying lead, black, line power input
          Slave (1) 18 AWG Class 1 flying lead, blue;
        Connects between Master and Slave(s)
          Load (1) Class 1 flying lead, red, load output
          Neutral (1) Class 1 flying lead, white, neutral
          Ground (1) Class 1 flying lead, green, ground
        Environmental
          Temperature 32° to 104°F (0° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
        Enclosure
          1-gang mountable in a 3-1/2 inch deep electrical box;
        Requires decorator style faceplate (not included)
        Dimensions
          Height 4.13 in (10.48 cm)
          Width 2.38 in (6.03 cm)
          Depth 1.91 in (4.85 cm)
        Weight
          4.9 oz (0.67 kg)