4TB Network Attached Storage


        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        Easy plug and play storage expansion for the ADMS Intermedia Delivery System™.

        The CEN-NAS-4TB provides a simple storage expansion solution for the ADMS Intermedia Delivery System™. It comes pre-configured for the ADMS, and features four hot-swappable 1TB hard drives with RAID 5 protection, all in a single rack space. It can store 1500 standard definition movie downloads, and well over 300,000 songs (compressed @ 320kbps).

        Managing media files on the CEN-NAS-4TB is simple since it appears as a network drive on a Windows, Mac, or Linux computer. Simply drag and drop files onto the CEN-NAS-4TB, and the ADMS automatically adds them to the media library.

        Configuring network settings is facilitated through a Web browser.

        RAID 5 protection keeps all your data safe against loss due to a disk error or drive failure. In the unlikely event of a failure, the CEN-NAS-4TB can send an email alert message, as well as sounding an audible alarm. Replacing a failed drive can be accomplished easily by simply swapping out the drive right from the front panel without even having to shutdown or reboot.

        Key Features
        • Plug and play storage expansion for the ADMS
        • Can store 1500 standard definition movie downloads
        • Can store 150,000 songs in lossless format, and well over 300,000 compressed @ 320kbps
        • Contains 4 high-performance Seagate® Pipeline HD™ Pro hard drives for quiet, reliable operation
        • RAID 5 protection prevents any data loss if any single drive fails
        • Front access drive bays allow hot swappable drive replacement
        • Provides automatic email notification of any disk error
        • Allows easy configuration via Web browser
        • Single-space 19" rack-mountable
          500MHz, 32bit@DDR333, with floating point
          RAM 128MB
          Internal Hard Drives 4TB RAID 5 (stripe and mirror) SATA Hard Drive Array (4 x 1TB, hot-swappable), 3TB available for media storage
          10/100/1000BaseT, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, CIFS, AFP (3.1), FTP, NFS, IEEE 802.3U compliant
          Firewall, Auto-Block, "FTP over SSL (explicit)" or "FTP over TLS (explicit)", Encrypted Network Backup, Encrypted rsync, HTTPS Connection
          100-240V~50/60Hz 5A (1) IEC C14 male chassis plug;
        Mates with removable power cord (included)
          LAN 1 – 2 (2) 8-wire RJ45 female;
        10/100/1000BaseT Ethernet ports
          USB 1 – 2 (2) USB Type A female, not used
          eSATA (1) eSATA port, not used
          FOR FACTORY USE ONLY (1) DB9 male, not used
        Controls & LED Indicators
          Power Pushbutton and green LED, used to boot up or shut down the unit; LED indicates boot, shut down, and ready status
          LAN 1 – 2 (2) green LEDs, indicate network connection status and activity
          DRIVE 1 – 4 (4) green LEDs, indicate hard drive status and activity
          Alarm Silence (1) Pushbutton, silences the audible alarm following a drive failure
          STATUS (1) green LED, indicates storage volume status
        Power Requirements
          Main Power 5 Amps @ 100-240 Volts AC, 50/60 Hz
          Temperature 40° to 95°F (5° to 35°C)
          Humidity 5% to 95% RH (non-condensing)
          1U 19-inch rack-mountable (rack ears included);
        Fan-cooled, front and rear ventilation should not be restricted
          Height 1.74 in (4.42 cm)
          Width 18.89 in (47.99 cm)
          Depth 18.14 in (46.08 cm)
          15.9 lb (7.2 kg)