Products

    Pages

        SSC-100

        Meeting Room Availability Sign, Ceiling Mount, Without Engraving

        Mounts to the ceiling outside a meeting room to provides indication of the room’s availability.

        With just a glance down the hallway, the SSC provides highly-visible indication of a room’s availability as part of a complete Crestron® enterprise room scheduling solution. Its stylish appearance and vivid color illumination complement any corporate office environment. The two-sided, clear acrylic sign face glows bright green or red to indicate room availability. The sign face is custom engravable with the room number, name, or other designation. The complete sign assembly mounts to a cutout in a drywall or drop-tile ceiling.

        Room Availability Status
        For room scheduling applications, the SSC simply connects to a Crestron TSW-760 or TSW-1060 touch screen via USB. No special programming or configuration is required. The sign color is controlled by the room scheduling application, which runs on the touch screen and syncs with the Crestron Fusion® Enterprise Management Service. The sign illuminates green when the room is available and red when the room is occupied.[1]

        Custom RGB Color Mixing
        For custom applications, the SSC can be programmed to illuminate in any desired color. Its tri-color RGB LEDs allow for a full spectrum of colors by blending the red, green, and blue elements in 1% increments per color. Custom RGB color mixing requires the SSC to be connected to a Crestron control system via Cresnet®. The control system can be programmed to support all types of functionality, enabling colors to alternate, fade in and out, or blink on and off as desired.[2]

        Custom Engraving
        The SSC is available with or without custom engraving. The engraving appears on both sides of the acrylic sign face to identify the room by name or number. When illuminated, the engraving is clearly visible at a distance of 50 feet or 15 meters. Engraving can be changed at any time by purchasing a replacement sign face (model SSC-ACR).

        Simple Installation
        Installing the SSC is simple. It mounts to a drywall or drop-tile ceiling through a 2 x 10.4 inch (51 x 264 mm) cutout using four dog-leg mounting clamps integrated into the unit. Power and communications are supplied by a single USB or Cresnet wire. For typical room scheduling applications, a fifteen foot (4.57 meter) plenum-rated USB cable is included, which connects to the wall-mounted touch screen nearby. For custom applications, a Cresnet cable (sold separately) can be run to a control system up to 3000 feet (914 meters) away. Cresnet allows for daisy-chaining multiple SSC hallway signs using a single cable.[1,2]

         
        Key Features
        • Provides highly-visible indication of room availability
        • Reveals every free meeting room at a glance down the hallway
        • Stylish ceiling mount design with two-sided, clear acrylic sign face
        • Custom engravable room name/number designation
        • Clearly visible and legible at 50 feet or 15 meters
        • Out-of-the-box functionality when used with a TSW-760 or TSW-1060 touch screen [1]
        • Illuminates vivid green or red to indicate room availability status
        • Custom functionality possible when connected to a Crestron® control system [2]
        • Supports RGB color mixing via custom control system programming
        • Allows virtually any color illumination (except white)
        • Energy efficient 2.4 Watts power consumption
        • Single-wire USB or Cresnet® connectivity [1,2]
        • Mounts in a drywall or drop-tile ceiling
        • Dog-leg mounting clamps for fast, easy installation
        • Plenum-rated design — no back box required
        • Projects 5.18 inches (132 mm) from the ceiling
        1. The USB port and cable are exclusively for connection to a Crestron TSW-760 or TSW-1060 touch screen running the room scheduling application. The TSW-1060 must be powered using PoE+ (IEEE 802.3at Type 2 Class 4).
        2. USB and Cresnet connectivity are mutually exclusive. Custom functionality via Cresnet cannot be enabled in combination with room scheduling functionality via USB.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, Cresnet, and Crestron Fusion are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.

         
        Signage
          Material Acrylic, two sided
          Engraving One or two lines per side, same text each side
          Illumination Edgelit RGB LED
          Functionality Supports alternating red/green indication of room availability status when connected to a room scheduling touch screen via USB [1], supports custom RGB color mixing when connected to a control system via Cresnet [2]
        Communications
          USB USB 2.0 device for connection to a TSW-760 or TSW-1060 touch screen [1]
          Cresnet Cresnet slave mode [2]
        Connectors
          CNET (1) 4-pin 3.5 mm detachable terminal block;
        Cresnet slave port [2]
          USB (1) Micro-USB Type B connector, female;
        USB 2.0 device port [1];
        Plenum rated 15 ft (4.57 m) micro-B male to A male USB cable included
        Controls
          CNET ID (1) Pushbutton (behind bezel) for Cresnet TSID (touch-settable ID)
        Power
          USB 2.4 Watts @ 5 Volts USB power [1]
          Cresnet Power Usage 2.4 Watts @ 24 Volts DC
        Environmental
          Temperature 41° to 113° F (5° to 45° C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 8 BTU/hr
        Construction
          Composition Metal bracket with replaceable acrylic sign face and magnetically-held white plastic bezel
          Mounting Flush ceiling mount using 4 pivoting dog-leg clamps;
        2.0 x 10.4 in (51 x 264 mm) recommended cutout;
        1.5 in (39 mm) minimum mounting depth using USB;
        2.5 in (64 mm) minimum mounting depth using Cresnet;
        0.3 in (8 mm) minimum surface thickness;
        0.8 in (20 mm) maximum surface thickness
        Dimensions
          Height 6.63 in (169 mm)
          Width 2.82 in (72 mm)
          Depth 11.11 in (282 mm)
          Projects 5.18 in (132 mm) below the ceiling surface
        Weight
          1.5 lb (680 g)
        1. The USB port and cable are exclusively for connection to a Crestron TSW-760 or TSW-1060 touch screen running the room scheduling application. The TSW-1060 must be powered using PoE+ (IEEE 802.3at Type 2 Class 4).
        2. USB and Cresnet connectivity are mutually exclusive. Custom functionality via Cresnet cannot be enabled in combination with room scheduling functionality via USB.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, Cresnet, and Crestron Fusion are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2017 Crestron Electronics, Inc.