Products

    Pages

        TPS-6X-IMCW

        Interface Module for TPS-6, TPS-6X-DS, TPS-6X-DS-LP, & TPMC-9

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        Provides a single-wire connection for TPS-6 and TPMC-9 Touchpanels, and for the TPS-6X-DS Docking Station. Mounts in a single-gang wall box, or to any flat surface using its included bracket. Includes inserts to match black or white decorator style faceplates.

        The TPS-6X-IMCW is the interface module that is included with the Isys™ TPS-6 and TPMC-9 Tilt Touchpanels, TPS-6X Wireless Touchpanel, and TPS-6X-DS Docking Station. It provides a convenient pluggable connection via a single 10-pin RJ50 jack on its front panel. On the rear are connections for Cresnet®, Ethernet, balanced or unbalanced video, and a choice of Cresnet or local DC power. An additional DC power jack is included on the front panel to simplify the connection of a local power supply in a typical wall mount application.

        Using the hardware provided, the TPS-6X-IMCW can be mounted in a standard 1-gang electrical box, to a flat surface, or to a 19-inch rack-rail. Multiple TPS-6X-IMCW interface modules may be purchased individually and installed as part of a complete system to provide multiple touchpanel connection locations.

         
        Key Features
        • Single-wire connection for the TPS-6X-DS, TPS-6, and TPMC-9
        • Mounts in a single-gang wall box
        • Includes inserts to match black or white faceplates
        • Surface mount and rack-rail installation options included
        • Wired Ethernet and Cresnet control system connections
        • Balanced or coaxial video input
        • Versatile powering options
         
        Connectors – Front Panel
          TO PANEL (1) 10-pin RJ50 female;
        Connection for TPS-6 or TPMC-9 touchpanel, or TPS-6X-DS docking station
          PWR 24VDC .75A (1) 2.1mm barrel DC power jack;
        24 Volt DC power input;
        PW-2407WU power pack included
        Connectors – Rear Panel
          PWR 24VDC .75A (1) 2.1mm barrel DC power jack;
        24 Volt DC power input;
        PW-2407WU power pack included
          NET (1) 4-pin 3.5mm detachable terminal block;
        Cresnet slave port, connects to Cresnet control network
          BAL VIDEO IN (1) 3-pin 3.5mm detachable terminal block;
        Balanced composite video input;
        Input Impedance: 100 ohms nominal;
        Input Level: 1 Vp-p nominal, 1.5 Vp-p maximum;
        Maximum DC Offset: ±2 Volts;
        Connects to any Crestron CAT5 Video Out port via CresCAT cable
          UNBL VIDEO IN (1) 2-pin 3.5mm detachable terminal block;
        Unbalanced composite video input;
        Input Impedance: 75 ohm nominal;
        Input Level: 1 Vp-p nominal, 1.5 Vp-p maximum;
        Maximum DC Offset: ±2 Volts;
        Connects to any conventional coax video source;
        Note: Balanced and unbalanced video inputs are mutually exclusive
          LAN (1) 8-wire RJ45, 10/100BaseT Ethernet port
          Ground (1) Flying lead, grounding wire
        Indicators
          PWR (green) Indicates DC power supplied from Cresnet network or DC power pack
        Power Requirements
          Power Pack 0.75 Amps @ 24 Volts DC;
        100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included
          Cresnet Power Usage 0.5 Watt (0.02 Amps @ 24 Volts DC), module only;
        18 Watts (0.75 Amps @ 24 Volts DC) with TPS-6X or TPS-6XNL connected;
        16 Watts (0.67 Amps @ 24 Volts DC) with TPS-6 or TPMC-9 connected
          Note: May be powered by Power Pack or Cresnet network power, not both.
        Environmental
          Temperature 32° to 112°F (0° to 45°C)
          Humidity 10% to 90% RH (non-condensing)
        Enclosure
          Construction Metal, black matte powder coat finish, includes (2) metal decorator style inserts to allow choice of black or white front panel
          Flush Wall Mount 1-gang mountable in a standard electrical box (2.5 inch deep minimum); requires decorator style faceplate (not included)
          Surface Mount Surface mount bracket included
          Rack Mount Mountable to a single 19-inch EIA rack rail
        Dimensions
          Height 4.11 in (105 mm)
          Width 1.72 in (44 mm);
        1.93 in (49 mm) w/surface mount bracket
          Depth 1.43 in (37 mm);
        1.49 in (38 mm) w/surface mount bracket
        Weight
          5.7 oz (162 g);
        8.2 oz (232 g) with bracket