Products

    Pages

        BPC-HPLIR

        onCue® IR Learner & Programmer

        A convenient tool for enabling advanced configuration of the onCue BPC-8 Basic Presentation Controller.

        The BPC-HPLIR is a handheld tool designed for use with the Crestron® onCue® BPC-8 Basic Presentation Controller, providing a simple means to learn IR commands from third-party remotes and upload configuration files created using the onCue Software Tool. The BPC-HPLIR enables the installer to upload a single configuration to any number of BPC-8 controllers, transferring the file to each BPC-8 via a simple optical cable (included). There's no need to remove the BPC-8 from the wall or even remove its faceplate, and one configuration can be used repeatedly for any number of identically equipped rooms, affording quick and easy setup of each room without any need to carry around a laptop.

        The BPC-HPLIR may also be used in conjunction with the Device Learner software tool (part of Crestron Toolbox™) to provide a solution for creating, editing, testing, and managing IR device control files for use in programming any Crestron control system. The Device Learner software tool provides a comprehensive and easy-to-use utility for creating complete IR files, and adding them to the User Database for use with Crestron programming applications such as SIMPL Windows, SystemBuilder™, and D3 Pro®.

         
        1. The BPC-8 is only compatible with IR signals up to 455 kHz.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Crestron, Crestron Toolbox, D3 Pro, onCue, SystemBuilder, and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. ©2012 Crestron Electronics, Inc.

         
        Controls & Indicators
          READY (1) Amber LED, indicates unit is ready to learn an IR command
          SIGNAL (1) Amber LED, indicates an IR signal has been detected
          OVERDRIVE (1) Red LED, indicates IR signal is too strong and cannot be learned
          FAILED (1) Red LED, indicates IR command could not be learned successfully
          COMPLETE (1) Green LED, indicates IR command has been learned successfully
          COMPUTER (1) Green LED, indicates a computer is connected and providing power via USB
          LOAD (1) Green LED, indicates configuration file is being uploaded to the BPC-8
          NO PROGRAM (1) Amber LED, indicates no configuration file exists in the BPC-HPLIR
          LOW BATT (1) Red LED, indicates the battery is running low
          TRANSFER (1) Pushbutton, initiates transmission of stored configuration file to the BPC-8
        Communications
          USB For console, USB 2.0 client
          IR Learns infrared control commands up to 1.2 MHz[1]
          Optical Transmits configuration file via IR to BPC-8
        Connectors & IR Receiver
          IR In (1) IR receiver, receives IR signals up to 1.2 MHz[1];
        For learning of IR codes
          IR Out (1) 1000 µm fiber coupler;
        Configuration file upload link to BPC-8~3 ft (~1 m) optical cable included
          COMPUTER (1) USB Type B female;
        USB 2.0 computer console port (6 ft cable included)
        Power Requirements
          Battery (1) 9 Volt disposable alkaline, 625 mAh (included)
          USB 83 mA @ 5 Volts DC, overrides battery when sufficient power is available
        Environmental
          Temperature 32° to 113°F (0° to 45°C)
          Humidity 10% to 90% RH (non-condensing)
        Enclosure
          Plastic, black, handheld
        Dimensions
          Height 5.78 in (147 mm)
          Width 3.60 in (92 mm)
          Depth 1.12 in (29 mm)
        Weight
          9.6 oz (272 g)
        1. The BPC-8 is only compatible with IR signals up to 455 kHz.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Crestron, Crestron Toolbox, D3 Pro, onCue, SystemBuilder, and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. ©2012 Crestron Electronics, Inc.