Products

    Pages

        TST-600-DSW-B-S

        Wall Dock for TST-600 & TST-602, Black Smooth

        Provides a convenient in-wall charging solution for the TST-600 and TST-602 Wireless Touch Screens.

        The TST-600-DSW is the wall dock that is included as standard with the TST-600-WALL and TST-602-WALL Wall Mount Wireless Touch Screens. It provides a convenient in-wall solution for charging the touch screen’s internal battery. It is also available separately as an add-on accessory for the TST-600 and TST-602 Wireless Touch Screens to provide an alternate in-wall charging option.

        The TST-600-DSW is designed for easy flush-mount installation in a flat, vertical wall structure[1]. A variety of mounting accessories (sold separately) is offered for both pre- and post-construction applications.

        Placing the touch screen into the wall dock enables its use as a stationary touch screen while simultaneously charging its internal battery. The wall dock can also provide a wired Ethernet connection for the touch screen while docked.

        When docked in the TST-600-DSW, the touch screen is partially recessed, affording a clean appearance while inhibiting unauthorized removal. By pressing a button or entering a passcode on the touch screen, the mechanism gently extends the touch screen outward, allowing it to be released for wireless use. A hardware key is included to release the touch screen in the event of a power failure.

         
        1. The TST-600-DSW docking mechanism is designed for proper operation when mounted in a vertical orientation as in a typical wall. The maximum allowable tilt is 18° back or 3° forward. The mechanism will not eject properly at angles greater than these.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Crestron, the Crestron logo, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

         
        Connectors
          NET (1) 4-pin 3.5mm detachable terminal block;
        Cresnet® power port, connects to the Cresnet control network (for power only) or a dedicated Cresnet power supply
          LAN (1) 8-wire RJ45 female;
        10Base-T/100Base-TX Ethernet port
        Controls
          OPEN (1) Pushbutton, accessible when touch screen is not docked, releases the docking mechanism to allow touch screen to be docked
        Power Requirements
          Cresnet Power Usage 43 Watts (1.8 Amps @ 24 Volts DC) with touch screen docked
          Note: May be powered by Cresnet network power or a dedicated Cresnet power supply. Does not support Cresnet data communication, only power.
        Environmental
          Temperature 41° to 104°F (5° to 40°C);
        50° to 104°F (10° to 40°C) while charging
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 147 BTU/hr (including touch screen)
        Enclosure
          Chassis Metal, flush-mountable in a vertical wall structure[1] (all mounting accessories sold separately)
          Faceplate Plastic
        Dimensions
          Height 7.11 in (181 mm)
          Width 9.70 in (247 mm)
          Depth 4.17 in (106 mm)
          Total depth with touch screen docked is 4.50 in (115 mm).
        Weight
          5.2 lb (2.4 kg)
        1. The TST-600-DSW docking mechanism is designed for proper operation when mounted in a vertical orientation as in a typical wall. The maximum allowable tilt is 18° back or 3° forward. The mechanism will not eject properly at angles greater than these.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Crestron, the Crestron logo, and Cresnet are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

        Online Help

        TPS-6X-DSW Firmware Update Instructions
        How to update a TPS-6X-DSW to support a TST-600 or a TST-602
        Online Help Answer ID :5334