Products

    Pages

        CEN-WAP-1500

        High Power Dual-Band Wireless Access Point

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        Provides a wireless access point with exceptional Wi-Fi® performance for use with Crestron® touch screens, remotes, computers, mobile devices, and other equipment. Supports 802.11 a, b, g, and n devices.

        The CEN-WAP-1500 Wireless Access Point provides exceptional Wi-Fi® performance for use with Crestron® touch screens, remotes, computers, mobile devices, and other equipment. High output power combined with concurrent dual-band 3x3 MIMO technology delivers superior wireless range and maximum data rates for demanding residential and commercial applications. The CEN-WAP-1500 supports 802.11 a, b, g, and n devices. Internal high-performance antennas achieve extended omnidirectional coverage for easy placement in virtually any indoor environment. Its low-profile design and versatile installation options afford an unobtrusive appearance, whether placed on a shelf or mounted to a wall or ceiling. The included PoE injector streamlines wiring to the wireless access point location, carrying both power and data over a single Ethernet cable.[1]

         
        Key Features
        • High output power for broader coverage
        • Concurrent dual-band (2.4 GHz & 5 GHz) technology
        • 802.11 a, b, g, and n support
        • Data transfer rates of up to 900 Mbps[2]
        • VLAN support for creating a secure guest network
        • QoS support for prioritizing network traffic
        • Support for up to 8 SSIDs
        • Web browser based management
        • System logging capability
        • One-wire installation using included PoE injector[1]
        • Low-profile housing
        • Shelf, wall, or ceiling mount installation
        1. The CEN-WAP-1500 must be powered using the PoE injector supplied. Due to its high power design, it is not compatible with any other PoE injector or PSE (Power Sourcing Equipment).
        2. All references to speed are for comparison purposes only.
        3. The CEN-WAP-1500 is not a router and must be connected to a network with a router to enable Internet access.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

         

        Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Wi-Fi, WPA, and WPA2 are either trademarks or registered trademarks of Wi-Fi Alliance in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

         
        Wireless
          Protocols IEEE 802.11a/b/g/n Wi-Fi®
          Frequency Bands Concurrent 2.4 GHz and 5 GHz (5.15-5.25 GHZ or 5.8 GHz)
          Speed [2] Up to 900 Mbps (450 Mbps @ 2.4 GHz, 450 Mbps @ 5 GHz)
          Transmit Power 600 mW
          Security 64 & 128-bit WEP, WPA™, WPA2™, WPA-PSK, WPA2-PSK
        Wired
          10/100/1000 Mbps Gigabit Ethernet [3]
        Connectors – Wireless Access Point
          PoE (1) 8-wire RJ45, female;
        10Base-T/100Base-TX/1000Base-T Ethernet and PoE PD (Powered Device) port [1];
        Connects to the DATA & PWR OUT port of the supplied PoE injector [1];
        Maximum Cable Length: 330 ft (100 m) total to network switch port with PoE injector inserted at any point in line [3]
          LAN (1) 8-wire RJ45, female;
        10Base-T/100Base-TX/1000Base-T Ethernet port;
        Provides a LAN port for a wired Ethernet device (does not supply PoE)
        Connectors – PoE Injector
          DATA IN (1) 8-wire RJ45, female;
        Ethernet pass-thru port;
        Connects to the LAN via CAT5e or CAT6 Ethernet cable [3]
          DATA & PWR OUT (1) 8-wire RJ45, female;
        Ethernet pass-thru and PoE PSE port;
        Connects to the PoE port of the Wireless Access Point
          Power Input Main power inlet;
        Mates with detachable power cord, included
        Controls & Indicators – Wireless Access Point
          Reset (1) Pushbutton, resets the device
          Power (1) LED, indicates operating power is supplied via the PoE injector
          2.4GHz (1) LED, indicates the configuration and broadcasting of a 2.4 GHz network
          5GHz (1) LED, indicates the configuration and broadcasting of a 5 GHz network
          PoE Port (2) LEDs, indicate Ethernet speed and activity
          LAN Port (2) LEDs, indicate Ethernet speed and activity
        Controls & Indicators – PoE Injector
          PoE (1) LED, indicated power is being delivered to the Wireless Access Point
          PWR (1) LED, indicates operating power is supplied via the Power Input
        Power Requirements
          Wireless Access Point 1.25 Amps @ 48 Volts DC supplied by PoE injector (included);
        Must be powered by the PoE injector supplied; not compatible with any other PoE injector or PSE [1]
          PoE Injector (included) 0.3 Amp @ 100-240 Volts AC, 50/60 Hz
        Environmental
          Temperature 32° to 113°F (0° to 45°C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 85 BTU/hr
        Construction
          Chassis Plastic
          Mounting Freestanding or mounts to a wall or ceiling (mounting bracket and rubber foot pads included)
        Dimensions
          Diameter 7.88 in (200 mm)
          Height 1.58 in (40 mm)
        Weight
          1.0 lb (0.46 kg)
        1. The CEN-WAP-1500 must be powered using the PoE injector supplied. Due to its high power design, it is not compatible with any other PoE injector or PSE (Power Sourcing Equipment).
        2. All references to speed are for comparison purposes only.
        3. The CEN-WAP-1500 is not a router and must be connected to a network with a router to enable Internet access.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

         

        Crestron and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Wi-Fi, WPA, and WPA2 are either trademarks or registered trademarks of Wi-Fi Alliance in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

        Online Help

        RF/Wireless Best Practices Guide
        Online Help Answer ID :4742