Products

    Pages

        IPAC-GL1-B-T

        Integrated Professional Automation Computer for Green Light Power Switching Systems, Black

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        • Wall mount lighting control processor
        • Crestron 2-Series control engine
        • Easy system programming via LCD front panel

         

         

        For an alternative power switch, please see the GL-IPAC-SW8.

        The Crestron IPAC is a 2-Series control processor designed for wall mount installation. Its front panel controls and LCD display deliver a user-friendly interface for out-of-the-box system setup. Built-in Ethernet, Cresnet, RS-232, relay, and sensor inputs provide direct connectivity for interfacing with all kinds of devices, controls, and networks. The onboard e-Control® Web server allows for complete integration as part of a facility-wide managed control network.

        Out-of-the-Box Lighting Control

        The GL1 version of IPAC comes preconfigured for use as the central control processor for a Green Light Power Switching system. Right out of the box, the IPAC-GL1 affords easy setup and programming for a complete switching system consisting of:

        Up to 210 switched loads

        CNX-B, C2N-DB, and Cameo keypads

        41 occupancy sensors and photosensors

        100 time clock events

        Keypads with as many as 12 buttons each can be programmed easily to control lighting loads and other functions. As well, the seven function buttons on the front panel of the IPAC-GL1 may also be programmed. Custom backlit labeling of the front panel buttons is facilitated using an assortment of pre-printed labels or Crestron Engraver software.

        Lights can be programmed to turn on and off automatically using the built-in astronomical time clock feature. Lighting events may be programmed to occur at specific times or at an offset from sunrise or sunset. Occupancy sensors and photosensors may also be implemented to enable automatic on/off lighting control based on room occupancy and ambient light levels.

        Custom Programmability

        With additional custom programming, the IPAC-GL1 can support virtually any functionality imaginable. It works seamlessly with Crestron's entire line of touchpanels, wireless remotes, lighting dimmers, shade controllers, thermostats, and more. It can also interface with third-party devices and systems such as security and access controls, surveillance cameras, and

        HVAC for a fully integrated solution. Contact Crestron Sales Support Services for more information.

        The IPAC-GL1 is designed to be mounted in a standard 3-gang electrical box independent of the lighting panels, allowing it to be installed wherever it is most advantageous for the project.

         
        Key Features
        • Wall mount lighting control processor
        • Crestron 2-Series control engine
        • Easy system programming via LCD front panel
        • 7 programmable buttons with LED feedback
        • Customizable backlit button labels
        • CEC Title 24 listed
        • Astronomical time clock
        • Occupancy sensing and daylight harvesting
        • 2 RS-232, 4 digital/analog input, & 4 relay control ports
        • Cresnet and 10/100 Ethernet communications
        • Onboard e-Control® Web server
        • RoomView® and SNMP remote management
        • SSL (Secure Sockets Layer) network protection
        • Extensively programmable via PC software
        • 3-gang wall-mountable
        • Available in white or black
         
        Processor
          CPU 32-bit Freescale ColdFire® Microprocessor
        Memory
          SDRAM 32 MB
          NVRAM 1 MB
          Flash 8 MB
          Power Failure Memory 10 years
        Time Clock
          Accuracy ±1 minute per year
        Operating System
          Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; includes default program for Green Light Power Switching systems
        Ethernet
          10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP, DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView® applications
        Connectors
          NET (2) sets of (4) captive screw terminals;
        Cresnet port and 24 Volt DC power input with parallel pass-thru;
        Connects to GLPS switching panels, GLS sensors (via GLS-SIM modules), and keypads (CNX-B, C2N-DB, C2N-CBD-TS, or C2N-CBF-T);
        Default program supports up to 9 panels with 42 loads each, 40 sensors (via 20 GLS-SIM modules), and 16 keypads via Cresnet
          LAN (1) 8-wire RJ45 with 2 LED indicators;
        10/100BaseT Ethernet port;
        Green LED indicates link status;
        Yellow LED indicates Ethernet activity
          Ground (1) flying lead, chassis ground wire
          COM 1* (5) captive screw terminals;
        Bidirectional RS-232 port;
        Up to 115.2k baud; hardware and software handshaking support
          COM 2* (3) captive screw terminals;
        Bidirectional RS-232 port;
        Up to 115.2k baud; software handshaking only
          RELAYS 1 – 4* (6) captive screw terminals comprising (4) normally open, isolated relays (every two share a common);
        Rated 1 Amp, 30 Volts AC/DC;
        MOV arc suppression across contacts
          INPUTS 1 – 4 (5) captive screw terminals comprising (4) digital or analog input ports (referenced to GND);
        Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.25 Volts DC;
        Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms;
        Programmable 5 Volts, 2k ohms pull-up resistor per pin;
        Default program supports connection of one occupancy sensor or photo sensor (Input 1), one Override signal (Input 2), and Lockout signals for the IPAC front panel or external keypads (Inputs 3 and 4)
          Computer (1) USB Type B female (behind front cover);
        USB 1.1 computer console port (cable included)
        LCD Display
          Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight
        Controls and Indicators
          Selection Knob (1) continuous turn rotary encoder, adjusts menu parameters
          ENTER (1) pushbutton, selects underlined item and stores settings
          HOME (1) pushbutton, returns to the home page
          BACK (1) pushbutton, returns to the previous page
          CANCEL (1) pushbutton, cancels current action without saving
          HELP (1) pushbutton, opens context-sensitive help screen
          Soft Keys (4) pushbuttons for activation of LCD driven functions
          Function Buttons (7) Programmable pushbuttons with backlit label slot
          Feedback Indicators (7) Programmable red LEDs (1 per Function Button)
          HW-R (1) Recessed miniature pushbutton for hardware reset (reboots the processor)
          SW-R (1) Recessed miniature pushbutton (behind front cover) for software reset (restarts the SIMPL program)
        Light Sensor
          Photosensor, programmable for auto-dimming of front panel label backlight and other functions
        IR Receiver*
          Reception Frequency 36 to 38 kHz IR
          Formats Crestron format, RC5
          Range Up to 50 ft line of sight (typical), dependent upon angle, obstructions, IR interference, and IR remote signal strength
        Power Requirements
          Cresnet Power Usage 10 Watts (0.42 Amps @ 24 Volts DC);
        GLA-PWS50 or equivalent power supply required (sold separately)
          Available Cresnet Power 40 Watts using GLA-PWS50 power supply (sold separately)
        Environmental
          Temperature 32° to 104°F (0° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 20 BTU/hr
        Enclosure
          Faceplate High-impact plastic, black or white, with polycarbonate label overlay
          Chassis Injection-molded plastic with steel mounting plate
          Mounting Requires 3-gang plaster ring or electrical box (≥2.5 inch deep recommended)
        Dimensions
          Height 4.50 in (11.5 cm)
          Width 6.70 in (17.1 cm)
          Depth 2.23 in (5.7 cm)
        Weight
          1.4 lb (0.64 kg)
        Testing & Compliance
          UL Listed, FCC Part 15, CEC Title 24

        * This feature is not utilized by the default program.

        Standard button labels that ship with IPAC