Products

    Pages

        ST-PC

        Dual Power Control Module, 120VAC

        An expansion module for Crestron control systems to provide switched power control for two independent devices.

        The ST-PC is a Cresnet® expansion module that provides switching of AC power to two individual loads for on/off control of video monitors, tape decks, small audio amplifiers, and other AC powered devices. The ST-PC may be used to provide a power control interface wherever required for loads up to 1200 Watts, and may be rack-mounted using the optional ST-RMK rack mount kit (sold separately). Communication with the control system is via a single Cresnet connection.

         

        Crestron and Cresnet are trademarks of Crestron Electronics, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others.

         
        Connectors
          POWER A – B (2) 3-prong grounded AC sockets, switched AC power outlets;
        Maximum Load per Outlet: 10 Amps at 120 Volts AC tungsten load;
        Maximum Load Total: 10 Amps at 120 Volts AC
          POWER IN (1) 6 ft (1.83m) cable with grounded AC plug;
        Connects to AC power source
          NET (2) 6-pin RJ11 female, Cresnet slave ports, paralleled;
        Connect to Cresnet control network
          12VDC (1) 2.5mm barrel DC power jack
        12 Volt DC power input (PW-1205 power pack included)
        Controls & Indicators
          PWR (1) green LED, indicates power supplied from Cresnet network or local power pack
          NET (1) amber LED, indicates communication with Cresnet system
          POWER A – B (2) pushbuttons and red LEDs; pushbuttons toggle each corresponding power outlet on/off when control system is inactive, or function as programmable pushbuttons when control system is active; LEDs indicate when corresponding outlet is on
        Power Requirements
          Power Pack 0.5 Amp @ 12 Volts DC;
        120 Volts AC, 60 Hz power pack, model PW-1205, included
          Cresnet Power Usage 4 Watts (0.167 Amp @ 24 Volts DC) with no power pack connected
        Environmental
          Temperature 41° to 113°F (5° to 45°C)
          Humidity 10% to 90% RH (non-condensing)
        Enclosure
          Chassis Metal, black finish
          Faceplate Extruded aluminum, black finish with polycarbonate label overlay
          Mounting Freestanding or 1U 1/2-width 19-inch rack-mountable (adhesive feet included, ST-RMK rack kit sold separately)
        Dimensions
          Height 1.80 in (46 mm);
        1.70 in (44 mm) without feet
          Width 7.07 in (180 mm)
          Depth 6.32 in (161 mm)
        Weight
          2.7 lb (1.15 kg)
        INTERNATIONAL VERSION (230 VAC)
          STI-PC
          All the features and specifications of the ST-PC except:
          Connectors (partial)
          POWER A – B (2) 6 ft (1.83m) cables with inline female IEC connector, switched AC power outlets;
        Maximum Load per Outlet: 5 Amps at 250 Volts AC;
        Maximum Load Total: 6 Amps at 250 Volts AC
          Power Requirements
          Power Pack 0.5 Amp @ 12 Volts DC;
        230 Volts AC, 50 Hz power pack, model PWI-1215, included
          Cresnet Power Usage 4 Watts (0.167 Amp @ 24 Volts DC) with no power pack connected
          Weight
          2.8 lb (1.3 kg)

        Crestron and Cresnet are trademarks of Crestron Electronics, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others.