Products

    Pages

        CEN-CI3-3

        3-Series® Card Interface – 3 Slot

        Provides a control port expansion solution using up to three 3-Series® Control Cards.

        The Crestron® CEN-CI3-3 is a single-space rack-mountable device designed to provide a versatile control interface and expansion solution using up to three 3-Series® Control Cards. It is used to expand the control ports of a 3-Series Control System®, and can be installed with the control system at the central equipment cabinet, or located remotely near the device(s) under control. It can be placed on a shelf or rack-mounted using the rack ears included. It interfaces with the control system via Ethernet.

        The CEN-CI3-3 accepts three 3-Series control cards (sold separately). Control cards are available to support bidirectional RS-232, 422, or 485; IR or 1-way serial; 0-10V analog inputs; digital logic inputs or outputs; and low-voltage relay outputs.[1]

         
        Key Features
        • Accepts up to three 3-Series® Control Cards
        • Provides control port expansion for any 3-Series Control System®
        • External power pack included
        • Single-space 19-inch rack-mountable
        1. See individual control cards spec sheets for additional specifications.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, 3-Series, and 3-Series Control System are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

         
        Communications
          Ethernet 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
          USB For computer console
        Connectors & Card Slots
          S1 – S3 (3) 3-Series® control card expansion slots
          CONTROL SUBNET IN (1) 8-wire RJ45 jack;
        10Base-T/100Base-TX/1000Base-T Ethernet port
          CONTROL SUBNET OUT (1) 8-wire RJ45 jack;
        10Base-T/100Base-TX/1000Base-T Ethernet port
          24VDC 2A MAX (1) 2.1 x 5.5 mm DC power connector;
        24 Volt DC power input;
        PW-2420RU power pack included
          G (1) 6-32 screw, chassis ground lug
          COMPUTER (front) (1) USB Type B female;
        USB 2.0 computer console port (6 ft cable included);
        For setup only
        Controls & Indicators
          PWR (1) Green LED, indicates operating power supplied from power pack
          MSG (1) Red LED, indicates unit has generated an error message
          RESET (1) Recessed pushbutton for hardware reset
          SETUP (1) Recessed pushbutton with red LED for Ethernet auto-discovery
          SLOT 1 – 3 (3) Green LEDs, indicate control cards are inserted in the corresponding slots
          CONTROL SUBNET IN (rear) (2) Bi-color green/amber LEDs, left LED indicates Ethernet connection speed, right LED indicates Ethernet activity
          CONTROL SUBNET OUT (rear) (2) Bi-color green/amber LEDs, left LED indicates Ethernet connection speed, right LED indicates Ethernet activity
        Power Requirements
          Power Pack 2.0 Amps @ 24 Volts DC;
        100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included
        Environmental
          Temperature 41° to 113° F (5° to 45° C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 6 BTU/Hr without cards [1]
        Enclosure
          Chassis Metal, black finish, vented yop and sides
          Front Panel Metal, black finish, polycarbonate label overlay
          Mounting Freestanding or 1RU 19-inch rack-mountable (adhesive feet and rack ears included)
        Dimensions
          Height 1.70 in (44 mm) without feet
          Width 17.28 in (439 mm);
        19.00 in (483 mm) with rack ears
          Depth 10.06 in (256 mm)
        Weight
          5.0 lb (2.3 kg) without cards
        1. See individual control cards spec sheets for additional specifications.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, 3-Series, and 3-Series Control System are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.