Products

    Pages

        ABAR-1

        Crestron Home® CAT5 Balanced Audio Receiver, US/North America

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        Converts Crestron Home® CAT5 balanced audio to RCA unbalanced audio.

        The ABAR-1 is an active balanced-to-unbalanced audio converter designed to enable the connection of any Crestron Home® (CH) CAT5 Balanced Audio source to a conventional unbalanced stereo line-level input. It allows for extended wiring distances between the output of a “CH” compatible device, such as the Sonnex® Multiroom Audio Unamplified Expander (SWE-8), and the input of an amplifier or AV receiver.[1]

         
        1. For connection between two “CH” devices, use high-quality CAT5 (or better) unshielded twisted-pair cable. The maximum cable length is 500 ft (152 m). All wire and cables are sold separately. CH (Crestron Home) signal extension technology is not compatible with Crestron AUD-EXT, Sonnex Link, DigitalMedia™ (DM®), or other CATx based signal extension technologies.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

         

        Crestron, the Crestron logo, Crestron Home, DigitalMedia, DM, and Sonnex are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

         
        Audio
          Frequency Response 20Hz to 20kHz ±0.3dB
          THD+N 0.008%, 20Hz to 20kHz
          S/N Ratio 95dB, 20Hz to 20kHz A-weighted
        Connectors
          AUDIO IN (1) 8-pin RJ45 female, shielded;
        "CH" CAT5 balanced audio input port;
        Maximum Input Level: 4 Vrms;
        Input Impedance: 20k Ohms;
        Connects to any "CH" CAT5 balanced audio output port or bidirectional CAT5 balanced audio port [1]
          AUDIO OUT (2) RCA female;
        Unbalanced stereo line-level audio output;
        Maximum Output Level: 2 Vrms;
        Output Impedance: 22 Ohms
          PWR 12VDC 0.5A (1) 2.5 x 5.5 mm DC power connector;
        12 Volt DC power input;
        PW-1205 or PWI-1215 power pack included
        Indicators
          PWR (1) green LED, indicates operating power supplied via the external power pack
        Power Requirements
          Power Pack
        (US/North America)
        120 Volts AC, 60 Hz (input), 0.5 Amps @ 12 Volts DC (output), model PW-1205 (included with ABAR-1)
          Power Pack
        (International)
        100-240 Volts AC, 50/60 Hz (input), 1.5 Amps @ 12 Volts DC (output), model PWI-1215 (included with ABARI-1)
        Environmental
          Temperature 41° to 104°F (5° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
        Enclosure
          Metal with black finish, surface mount box with (2) integral mounting flanges
        Dimensions
          Height 3.20 in (82 mm)
          Width 2.73 in (70 mm)
          Depth 0.96 in (25 mm)
        Weight
          4.0 oz (114 g)
        1. For connection between two “CH” devices, use high-quality CAT5 (or better) unshielded twisted-pair cable. The maximum cable length is 500 ft (152 m). All wire and cables are sold separately. CH (Crestron Home) signal extension technology is not compatible with Crestron AUD-EXT, Sonnex Link, DigitalMedia™ (DM®), or other CATx based signal extension technologies.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

         

        Crestron, the Crestron logo, Crestron Home, DigitalMedia, DM, and Sonnex are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.