Encoding/Decoding |
Video Codec |
Pixel Perfect Processing |
Video Resolutions |
Up to 4096x2160@60Hz (DCI 4K60), 4:4:4 color sampling, HDR10 and Deep Color support |
Audio Formats |
Primary multichannel (up to 8-channel LPCM or encoded HBR 7.1 surround sound), secondary 2-channel LPCM |
Bit Rates |
200 to 950 Mbps10 |
Streaming Protocols |
RTP, SDP |
Container |
MPEG-2 transport stream (.ts) |
Session Initiation |
Multicast via secure RTSP |
Copy Protection |
HDCP 2.2, AES-128, PKI |
Video |
Input Signal Types |
HDMI with HDR10, Deep Color, and 4K60 4:4:4 support1, 11 (Dual-Mode DisplayPort™ interface and DVI compatible12) |
|
Output Signal Types |
HDMI with HDR10, Deep Color, and 4K60 4:4:4 support1 (DVI compatible12) |
Switcher |
3x1 in decoder mode (HDMI 1, HDMI 2, Stream) 2x1 in encoder mode, manual or auto-switching, breakaway audio6, Crestron QuickSwitch HD™ technology |
Scaler |
4K60 4:4:4 video scaler with motion-adaptive deinterlacing, intelligent frame rate conversion, Deep Color support, HDR10 support, widescreen format selection (zoom, stretch, maintain aspect ratio, or 1:1), video wall processing up to 8 wide x up to 8 high, static or dynamic text overlay |
Copy Protection |
HDCP 2.2 |
Maximum Resolutions:
Common resolutions are shown in the table below. Custom resolutions are supported at pixel clock rates up to 600 MHz.
Scan
Type |
Resolution |
Frame
Rate |
Color
Sampling |
Color
Depth |
Progressive |
4096x2160 DCI 4K and 3840x2160 4K UHD |
24 Hz |
4:4:4 |
36 bit |
30 Hz |
4:4:4 |
36 bit |
60 Hz |
4:2:2 |
36 bit |
60 Hz |
4:4:4 |
24 bit |
2560x1600 WQXGA |
60 Hz |
4:4:4 |
36 bit |
1920x1080 HD 1080p |
60 Hz |
4:4:4 |
36 bit |
Interlaced
(Input Only) |
1920x1080 HD 1080i |
30 Hz |
4:4:4 |
36 bit |
|
Audio |
Input Signal Types |
HDMI (Dual-Mode DisplayPort interface compatible12), analog stereo5 |
Output Signal Types |
HDMI (multichannel pass-through or 2-channel downmix), analog stereo (2-channel downmix)5 |
Digital Formats |
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS HD Master Audio, DTS:X, LPCM up to 8 channels |
Analog Formats |
Stereo 2-channel |
Analog-To-Digital Conversion |
24-bit 48 kHz |
Digital-To-Analog Conversion |
24-bit 48 kHz |
AES67 |
24-bit 48 kHz |
Analog Performance |
Frequency Response: 20 Hz to 20 kHz ±0.5 dB;
S/N Ratio: >95 dB 20 Hz to 20 kHz A-weighted;
THD+N: <0.005% @ 1 kHz;
Stereo Separation: >90 dB |
Analog Output Volume Adjustment |
−80 to +20 dB |
Audio Delay |
0 to 1200 ms |
Communications |
Ethernet |
100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, TCP/IP, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), IEEE 802.1X, IPv4, Active Directory authentication, variable Multicast TTL, HTTPS web browser setup and control, Crestron 3-Series or later control system integration |
USB |
USB 2.0 host or device signal extension and routing, Layer 2 or Layer 3; USB 2.0 computer console (for setup) |
RS-232 |
2-way device control and monitoring up to 115.2k baud with hardware and software handshaking (via control system); computer console (for setup) |
IR/Serial |
1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 V) up to 19.2k baud (via control system) |
HDMI |
HDCP 2.2, EDID, CEC |
DM NVX (via Ethernet) |
HDCP 2.2, AES-128 AV content encryption with PKI authentication, RTP, secure RTSP, SDP, ONVIF, IGMPv2, IGMPv3, SMPTE 2022, FEC (Forward Error Correction) |
Connectors |
USB DEVICE |
(1) USB Type B connector, female;
USB 2.0 device port;
USB signal extender port for connection to a computer or other USB 2.0 host8 |
USB HOST |
(1) USB Type A connector, female;
USB 2.0 host port;
USB signal extender port for connection to a mouse, keyboard, or other USB 2.0 device;8
Available Power: 500 mA at 5 VDC |
Ethernet 1 |
(1) 8-pin RJ-45 connector, female;
100BASE-TX/1000BASE-T Ethernet port;2
PD (powered device) port;
IEEE 802.3bt Type 3 Class 5 (60 W/4 pair) compliant;
Compatible with Crestron DM-PSU-ULTRA-MIDSPAN, UPOE compliant Ethernet switch, or approved third-party PSE7 |
Ethernet 2 |
(1) 8-pin RJ-45 connector, female;
100BASE-TX/1000BASE-T Ethernet port2 |
Ethernet 3 |
(1) SFP port;
Accepts one Crestron SFP-1G Series transceiver module3 |
HDMI OUTPUT |
(1) HDMI Type A connector, female;
HDMI digital video/audio output1 (DVI compatible12) |
HDMI INPUT 1 – 2 |
(2) HDMI Type A connectors, female;
HDMI digital video/audio inputs;1
(DVI and Dual-Mode DisplayPort interface compatible12) |
AUDIO I/O |
(1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio input or output;5
Input Impedance: 24k Ohms balanced/unbalanced;
Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced;
Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced |
CONSOLE, SERIAL |
(1) 8-pin RJ-45 connector, female;
RS-232 computer console port (for setup) |
CONSOLE, USB |
(1) USB Type B connector, female;
USB 2.0 computer console port (for setup) |
IR 1 – 2 |
(1) 4-pin 3.5 mm detachable terminal block;
Comprises (2) IR/Serial ports;
IR output up to 1.1 MHz;
1-way serial TTL/RS-232 (0-5 V) up to 19200 baud;
IRP2 emitter sold separately |
COM |
(1) 5-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support |
24VDC 2.0A |
(1) 2.1 x 5.5 mm DC power connector;
24 VDC power input;
PW-2420RU power pack included |
G |
(1) 6-32 screw;
Chassis ground lug |
Controls and Indicators |
TX |
(1) Green LED, indicates unit is in encoder (transmitter) mode |
RX |
(1) Green LED, indicates unit is in decoder (receiver) mode |
OL |
(1) Green LED, indicates an online connection to a control system via Ethernet |
Ethernet 1 – 2 |
(4) LEDs, green indicates Ethernet link status, amber indicates Ethernet activity |
Ethernet 3 LNK |
(1) Green LED, indicates Ethernet link status |
Ethernet 3 ACT |
(1) Green LED, indicates Ethernet activity |
HDMI OUTPUT |
(1) Green LED, indicates video signal transmission at the HDMI output |
HDMI INPUT 1 – 2 |
(2) Green LEDs, each indicates sync detection at the corresponding HDMI input |
PWR |
(1) Bi-color green/amber LED, indicates operating power supplied via the power pack, UPOE compliant Ethernet switch, or injector/PSE, illuminates amber while booting and green when operating |
SETUP |
(1) Red LED and (1) pushbutton for onscreen IP address display and to change between TX and RX modes |
RESET |
(1) Recessed pushbutton for hardware reset |
INPUT SEL |
(1) Pushbutton for manual input selection and (2) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding input |
Power |
Power Pack (Included) |
Input: 1.5 A maximum @ 100-240 VAC, 50/60 Hz;
Output: 2 A @ 24 VDC;
Model: PW-2420RU |
Power over LAN |
IEEE 802.3bt Type 3 Class 5 (60 W/4 pair) compliant;
Compatible with the following PSEs:
• Crestron DM-PSU-ULTRA-MIDSPAN for 2 DM NVX endpoints;
• Microsemi® PD-9500G Family Gigabit EEPoE Midspans as follows:
- PD-9506G for 6 DM NVX endpoints
- PD-9512G for 10 DM NVX endpoints
- PD-9524G for 20 DM NVX endpoints
|
Power Consumption |
35 W typical |
Environmental |
Temperature |
32° to 104° F (0° to 40° C) |
Humidity |
10% to 90% RH (non-condensing) |
Heat Dissipation |
85 BTU/hr |
Acoustic Noise |
33 dBA typical |
Enclosure |
Chassis |
Metal, black finish, integral mounting flanges, fan cooled; vented top, front, bottom, and sides |
Mounting |
Freestanding, surface mount, or attach to a single rack rail |
Dimensions |
Height |
8.61 in. (219 mm) |
Width |
9.27 in. (236 mm) |
Depth |
1.50 in. (39 mm) |
Weight |
2.0 lb (0.91 kg) |
Compliance |
UL® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device |