Products

    Pages

        HD-RXU-4KZ-202

        DM Lite® 4K60 4:4:4 Receiver and 2x2 Auto-Switcher for HDMI® and USB 2.0 Signal Extension over CATx Cable

        Interoperability with a DM Lite® HD-TXU-4KZ Series transmitter to provide point-to-point extension of HDMI® and USB 2.0 signals over a CATx cable. Supports 4K60 4:4:4 video, HDR10+, and HDCP 2.3. Provides one HDMI input and one DM Lite input with automatic switching capability and support of two HDMI outputs.

        The HD-RXU-4KZ-202 is a DM Lite® 4K60 4:4:4 receiver designed to interoperate with a DM Lite HD-TXU-4KZ Series transmitter. The paired transmitter and receiver enable extension of an HDMI® AV signal along with USB 2.0 data. This is useful in applications where an AV source is located remotely from its destination, such as a display, projector, or codec solution. A CAT5e or higher twisted pair cable must be used to connect the HD-RXU-4KZ-202 to the DM Lite transmitter or DMPS Lite switcher.1

        Interoperability with a DM Lite HD-TXU-4KZ Series Transmitter
        For interoperability between the HD-RXU-4KZ-202 and an HD-TXU-4KZ Series transmitter, the DM Lite input port of the HD-RXU-4KZ-202 must be connected to the DM Lite output port of the HD-TXU-4KZ Series transmitter.

        NOTE: USB 2.0 data extension is not supported if the HD-RXU-4KZ-202 is paired with a DM Lite transmitter other than an HD-TXU-4KZ Series transmitter or paired with a DMPS Lite™ HD-PS Series switcher.

        4K60 4:4:4 and HDR Support
        The HD-RXU-4KZ-202 supports video resolutions up to 4K60 with 4:4:4 color sampling. HDR10, HDR10+, and Dolby Vision® video formats are also supported.2

        Integrated Web Server
        The HD-RXU-4KZ-202 includes a web server that enables device configuration and management. The web server also enables device, network, and other types of status information to be viewed.

        Automatic Switching of Inputs
        The web interface of the HD-RXU-4KZ-202 or control system programming can be used to configure AV switching behavior. Switching between the HDMI and DM Lite inputs occurs based on the last connected input or on the routing priority assigned to each input. In addition, input and output selection push buttons on the front of the HD-RXU-4KZ-202 enable the desired input and output be selected manually.

        USB 2.0 Data Extension
        Two USB 2.0 host ports are provided on the HD‑RXU‑4KZ‑202, enabling connection to a wide variety of supported USB 2.0 peripheral devices.3

        Compact, Surface-Mountable Design
        Compact in design, the HD-RXU-4KZ-202 can be mounted onto a flat surface such as a wall behind a flat-panel display or a ceiling above a projector. It can also be attached to a single rack rail in the back of an equipment cabinet. The HD-RXU-4KZ-202 receives power from the included power pack.4

         
        Key Features
        • DM Lite® receiver functionality designed to interoperate with a DM Lite HD-TXU-4KZ Series transmitter
        • Point-to-point extension of an HDMI® AV signal and USB 2.0 data signals over a CAT5e or higher cable
        • Two inputs with automatic switching:
          • One HDMI input with associated USB 2.0 USB-C® input
          • One DM Lite input
        • DM Lite transmission distance up to 130 ft (40 m) for UHD and 4K signals or up to 230 ft (70 m) for 1080p, WUXGA, and 2K signals
        • 4K60 4:4:4 capability
        • HDR10, HDR10+, and Dolby Vision® video formats
        • Enterprise-grade security
        • Compliance with HDCP 2.3
        • Integrated web server for device configuration and management
        • Automatic display control using CEC (Consumer Electronics Control)
        • EDID management
        • Interoperability with a Crestron 3-Series® or later control system
        • XiO Cloud® service support
        • .AV Framework™ technology support
        • Compact, surface-mountable design
        • Power from 24VDC power pack (included)
        1. For DM Lite connections, use Crestron DM-CBL-8G, Crestron DM‑CBL‑ULTRA, or third-party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Wire and cables are sold separately.
        2. 4K60 4:4:4 performance and HDR support require the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Bandwidth loss is cumulative; therefore, performance may be reduced when inserting multiple cables and couplers inline.
        3. The HD-RXU-4KZ-202 is engineered to deliver maximum compatibility with the widest possible range of USB devices. Crestron does not guarantee that all USB devices are compatible with the HD-RXU-4KZ-202.
        4. The HD-RXU-4KZ-202 is powered by the included power pack. The HD-RXU-4KZ-202 cannot receive power from a remote DM Lite transmitter.
        5. The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are sold separately.
        6. Examples of supported DM Lite transmitters are the HD-TXU-4KZ-211, HD-TXU-4KZ‑111-E and HD-TXU-4KZ-111-2G.

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or contact us for additional information by visiting www.crestron.com/contact/our-locations for your local contact.

        The original language version of this document is U.S. English.
        All other languages are a translation of the original document.

        The product warranty can be found at www.crestron.com/warranty.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open-source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, 3-Series, .AV Framework, DM Lite, DMPS Lite, and XiO Cloud are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, Dolby Digital, and Dolby Vision are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Intertek is either a trademark or registered trademark of Intertek Group in the United States and/or other countries. USB Type-C and USB‑C are either trademarks or registered trademarks of USB Implementers Forum, Inc. in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2023 Crestron Electronics, Inc.

         

         
        4K HDMI AVF Works With (2) HDCP 2.3
        Video
        Input Signal Types HDMI® (DVI and Dual-Mode DisplayPort™ interface compatible5) and DM Lite® with HDR10, HDR10+, Dolby Vision®, Deep Color, and 4K60 4:4:4 support2
        Output Signal Type HDMI® (DVI compatible5) with HDR10, HDR10+, Dolby Vision, Deep Color, and 4K60 4:4:4 support2
        Copy Protection HDCP 2.3
        Resolutions Common resolutions are listed in the following table.
        Scan Type Resolution Frame Rate Color Sampling Color Depth
        Progressive 4096x2160 DCI 4K & 3840x2160 4K UHD 24 Hz 4:4:4 12 bit
        30 Hz 4:4:4 12 bit
        60 Hz 4:2:2 12 bit
        60 Hz 4:4:4 8 bit
        2560x1600 WQXGA 60 Hz 4:4:4 8 bit
        1920x1080 FHD 1080p 60 Hz 4:4:4 12 bit
        Interlaced (HDMI input only) 1920x1080 HD 1080i 30 Hz 4:4:4 12 bit
        Note: The maximum supported resolution is 4K60 with 4:4:4 color sampling. Custom resolutions are supported at pixel clock rates up to 600 MHz.
        Audio
        Input Signal Types HDMI, DM Lite
        Output Signal Type HDMI
        Digital Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS ES, DTS 96/24, DTS HD® High Res, DTS-HD Master Audio, DTS:X®, LPCM up to 8 channels
        Communications
        HDMI HDCP 2.3, EDID, CEC
        DM Lite HDCP 2.3, EDID;
        USB 2.0 up to 300 Mbps
        USB USB signal extension via USB 2.0 host and device ports
        Ethernet 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, Web browser setup and control, Crestron control system integration, IEEE 802.1X, Secure CIP, Authentication, SSH/SSL, TLS
        Connectors
        SERVICE (1) USB 2.0 Type-A connector, female;
        Used for firmware loading and configuration management;
        Can also provide up to 5V 500 mA power to a USB powered device
        24V 1.9A (1) 2.1 x 5.5 mm DC power connector;
        24VDC power input;
        PW-2420RU power pack included4
        HDMI OUTPUT 1-2 (2) HDMI Type A connectors, female;
        HDMI digital video/audio output;
        DVI compatible5
        HDMI INPUT 1 (1) HDMI Type A connector, female;
        HDMI digital video/audio input;
        DVI and Dual-Mode DisplayPort interface compatible5
        DEVICE INPUT 1 (1) USB Type‑C® connector, female;
        USB 2.0 device port associated with HDMI input for AV sources that require USB 2.0 support;
        USB signal extender port for connection to a computer or other USB 2.0 host3
        HOST (2) USB Type-A connectors, female;
        USB 2.0 host ports;
        USB signal extender ports for connection to USB mice, keyboards, or other USB 2.0 peripheral devices;3
        Available Power: 500 mA @ 5VDC per port
        DM LITE IN 2 (1) 8‑pin RJ‑45 yellow connector, female, shielded;
        DM Lite input port for connection to the DM Lite output port of a DM Lite HD-TXU-4KZ Series transmitter1
        LAN (1) 8-pin RJ-45 connector, female;
        100BASE-TX/1000BASE-T Ethernet port for device configuration and management
        Ground (1) Chassis ground lug
        Controls and Indicators
        PWR (1) LED, indicates that power is being applied to the device. Amber indicates that the device is booting. Green indicates that the device is operational.
        AUTO (1) Push button for enabling or disabling automatic switching of inputs;
        (1) LED, green indicates that automatic switching of inputs is enabled
        SETUP (1) Push button for Ethernet setup;
        (1) LED, red indicates that the SETUP push button is pressed
        INPUT 1 (1) Push button for manual selection of HDMI input;
        (1) LED, green indicates that the HDMI input is routed to an output, and amber indicates that a source is detected but is not routed to an output
        INPUT 2 (1) Push button for manual selection of DM Lite input;
        (1) LED, green indicates that the DM Lite input is routed to an output, and amber indicates that a source is detected but is not routed to an output
        OUTPUT 1 (1) Push button for manual selection of HDMI output 1;
        (1) Green LED, indicates that a display or other destination device is detected and HDMI output 1 is transmitting video. Amber indicates that a display or other destination device is detected but no video is routed to the output.
        OUTPUT 2 (1) Push button for manual selection of HDMI output 2;
        (1) Green LED, indicates that a display or other destination device is detected and HDMI output 2 is transmitting video. Amber indicates that a display or other destination device is detected but no video is routed to the output.
        DM LITE IN 2 (2) LEDs on RJ‑45 connector.
        Green indicates that a DM Lite link is established;
        Flashing amber indicates non‑HDCP video, and solid amber indicates HDCP video
        LAN (2) LEDs on RJ‑45 connector;
        Green indicates that a 100 Mbps link is established;
        Solid amber indicates that a 1000 Mbps link is established;
        Flashing amber indicates 1000 Mbps Ethernet activity.
        Power
        Power Pack
        (Included)
        Input: 100-240VAC
        Output: 24VDC 2.5A
        Model: PW-2420RU4
        Environmental
        Temperature 32° to 104°F (0° to 40°C)
        Humidity 20% to 90% RH (non-condensing)
        Enclosure
        Chassis Metal, black finish, vented top, front, rear, and sides, 2 mounting brackets included
        Mounting Freestanding, surface mountable, or attachment to a single rack rail
        Dimensions
        Height 1.20 in. (30 mm)
        Width 8.52 in. (216 mm)
        Depth 6.48 in. (165 mm)
        Weight
        1.95 lb (0.88 kg)
        Compliance
        Regulatory Model: M202047008

        Intertek® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device
        Maximum DM Lite Transmission Distance
        Resolution Frame Rate (Hz) Color Sampling Color Depth Cable Type1
        DM-CBL-ULTRA DM® Ultra Cable DM-CBL-8G DM 8G® Cable or CAT5e (UTP) or Higher
        1920x1080 HD 1080i 30 4:4:4 12 bit 230 ft (70 m) 195 ft (60 m)
        1920x1080 FHD 1080p 60 4:4:4 8, 12 bit
        1600x1200 UXGA 60 4:4:4 8, 12 bit
        2048x1080 DCI 2K 60 4:4:4 8, 12 bit
        1920x1200 WUXGA 60 4:4:4 8, 12 bit
        2048x1152 QWXGA 60 4:4:4 8, 12 bit
        2560x1080 UWFHD 60 4:4:4 8 bit
        2560x1440 WQHD Reduced Blanking 60 4:4:4 8 bit
        2560x1600 WQXGA Reduced Blanking 60 4:4:4 8 bit
        2048x1152 QWXGA 60 4:4:4 12 bit
        3840x2160 4K UHD and 4096x2160 DCI 4K 30 4:2:2 12 bit
        30 4:4:4 8 bit
        60 4:2:0 8 bit
        3840x2160 4K UHD and 4096x2160 DCI 4K 30 4:4:4 12 bit 130 ft (40 m) 100 ft (30 m)
        60 4:2:0 12 bit
        60 4:2:2 12 bit
        60 4:4:4 8 bit
        Click here to search product certificates.
        1. For DM Lite connections, use Crestron DM-CBL-8G, Crestron DM‑CBL‑ULTRA, or third-party CAT5e or higher cable. To safeguard against unpredictable environmental electrical noise that may impact performance at resolutions above 1080p, shielded cable and connectors are recommended for all applications and are required when bundling multiple cables in a wire run. Wire and cables are sold separately.
        2. 4K60 4:4:4 performance and HDR support require the use of HDMI cables and couplers with a minimum TMDS bandwidth of 18 Gbps. If 4K60 4:2:0 or 4K30 4:4:4 performance is acceptable, cables and couplers with a minimum bandwidth of 10.2 Gbps may be used. Bandwidth loss is cumulative; therefore, performance may be reduced when inserting multiple cables and couplers inline.
        3. The HD-RXU-4KZ-202 is engineered to deliver maximum compatibility with the widest possible range of USB devices. Crestron does not guarantee that all USB devices are compatible with the HD-RXU-4KZ-202.
        4. The HD-RXU-4KZ-202 is powered by the included power pack. The HD-RXU-4KZ-202 cannot receive power from a remote DM Lite transmitter.
        5. The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. The HDMI output requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cables are sold separately.
        6. Examples of supported DM Lite transmitters are the HD-TXU-4KZ-211, HD-TXU-4KZ‑111-E and HD-TXU-4KZ-111-2G.

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or contact us for additional information by visiting www.crestron.com/contact/our-locations for your local contact.

        The original language version of this document is U.S. English.
        All other languages are a translation of the original document.

        The product warranty can be found at www.crestron.com/warranty.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open-source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, 3-Series, .AV Framework, DM Lite, DMPS Lite, and XiO Cloud are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, Dolby Digital, and Dolby Vision are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Intertek is either a trademark or registered trademark of Intertek Group in the United States and/or other countries. USB Type-C and USB‑C are either trademarks or registered trademarks of USB Implementers Forum, Inc. in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2023 Crestron Electronics, Inc.

         

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.