QMT5 Series Décor Shade Hardware
QMT5 Series Décor hardware from Crestron® is a mounting system that allows a Crestron shade to be mounted on a wall, ceiling, or window jamb where the entire shade will be exposed, giving the space a contemporary look.
PHOTO: Motorized shade mounting brackets shown
NOTE: “CSS-DECOR5” is sold as part of a custom-configured product and orders are placed via the Crestron® Design Tool for Crestron Shading Solutions. This specification page is for informational purposes and shows the available parts for QMT5 Series Décor Shade Hardware. To configure shades or order shading parts and accessories, please use the Crestron Design Tool for Crestron Shading Solutions or call 1-855-53-S-H-A-D-E (537-4233) for support.
QMT5 Series Décor hardware from Crestron® is a stylish mounting system that allows a Crestron shade to be mounted on a wall, ceiling, or window jamb where the entire shade will be exposed, giving the space a contemporary look. Motorized operation is provided by the nearly silent Crestron CSM-QMTDC-250-4 Digital QMT® motor.[1] The motor integrates into a Crestron control system through built-in communications, enabling the shades to be easily adjusted from remote controls, keypads, and touch screens.
The QMT5 Series Décor Hardware lineup also includes shade brackets for manual operation. Manually operated shades are a cost-effective solution for any shading application. Whether for installations in which motorized shades are unnecessary or not feasible or as a stop-gap before upgrading to motorized shades, manual shades offer the small profile and reliable, easy-to-install hardware of a Crestron shading solution with minimum effort.
An adjustable plate on the mounting brackets lets the idler end of the roller shade be moved up and down without having to remove the mounting brackets from the wall, allowing an installer to compensate for mounting conditions that are not level. The QMT motor snaps into its bracket and has a Quick Release button to make installation and removal without any special tools quick and easy. For ceiling mounting, the brackets are rotated 90 degrees, leaving a smaller dimensional projection than a wall mount.
End caps slide onto the mounting brackets for a more finished look.
NOTE: Please download the PDF version of this spec sheet for images and dimensional drawings of each hardware component.
Key Features
- Modern-looking hardware for outside or inside-mounted roller shades
- Compact design, takes up less space on mounting surface
- Adjustable brackets for shade leveling without any hardware removal
- Decorative end caps fit over mounting brackets and come in a variety of finishes
- Designed for use with Crestron CSM-QMTDC-250-4 Digital QMT® motors [1]
- Optional brackets for manually operated shading solutions
|
NOTE: Please refer to the PDF version of this spec sheet for images and dimensional drawings of each hardware component. |
Mounting Brackets (Motorized) |
|
Model Number |
CSA-DECOR5-BRKT
(includes (1) motor side bracket and (1) idler side bracket) |
|
Available Finishes |
White only |
|
Height |
3.15 in (80 mm) per bracket |
|
Width |
0.66 in (17 mm) per bracket |
|
Depth |
3.75 in (96 mm) per bracket |
Mounting Brackets (Manual) |
|
Model Number |
CSA-DECOR5-BRKT-MAN
(includes (1) clutch side bracket and (1) idler side bracket) |
|
Available Finishes |
White only |
|
Height |
3.48 in (89 mm) per bracket |
|
Width |
0.95 in (24 mm) per bracket |
|
Depth |
4.25 in (108 mm) per bracket |
End Caps |
|
Model Number |
CSA-DECOR5-BRKT-CAP
(includes (1) motor or clutch side end cap and (1) idler side end cap) |
|
Available Finishes |
White, Black, Gray, Brown, Almond, Chrome, Brushed Nickel, Antique Bronze |
Click
here to search product certificates.