| Wireless Communications |
| |
RF Transceiver |
Zūm Mesh 2-way RF, 2.4 GHz ISM Channels 15, 20, 25, or 26 (channel auto-selected), IEEE 802.15.4 compliant |
| |
Range |
50 ft (15 m) to nearest peer-to-peer mesh network device(s), subject to site-specific conditions and individual device capabilities [3] |
| |
Note: A maximum of 32 Zūm Mesh wireless devices, inclusive of a maximum of 8 battery-powered keypads, is permitted per room. |
| Controls & Indicators |
| |
Switch
(-KP10ABATT models) |
(1) 3-Position rocker switch (spring return to center); press up to recall the Scene 1 preset (switched loads on and dimmed loads at their saved preset dim levels [default=90%]), press down to turn all lighting loads off, press and hold up or down to raise or lower the dimming level for all dimmable lighting loads; also used for creating a preset, room setup, and factory reset |
| |
Buttons
(-KP10BBATT models) |
(4) Pushbuttons as follows:
ON: Press to recall the Scene 1 preset (switched loads on and dimmed loads at their saved preset dim levels [default=90%]), press and hold to raise the dimming level for all dimmable lighting loads;
SCENE 2: Press to recall the Scene 2 preset (switched loads on and dimmed loads at their saved preset dim levels [default=50%]), press and hold to save a new Scene 2 preset;
SCENE 3: Press to recall the Scene 3 preset (switched loads on and dimmed loads at their saved preset dim levels [default=50%]), press and hold to save a new Scene 3 preset;
OFF: Press to turn all loads off, press and hold to lower the dimming level for all dimmable lighting loads;
Buttons are also used for creating presets, room setup, and factory reset |
| |
Buttons
(-KP10CBATT models) |
(6) Pushbuttons as follows:
ON: Press to recall the Scene 1 preset (switched loads on and dimmed loads at their saved preset dim levels [default=90%]);
Up Arrow: Press to raise the dimming level for all dimmable lighting loads;
Down Arrow: Press to lower the dimming level for all dimmable lighting loads;
SCENE 2: Press to recall the Scene 2 preset (switched loads on and dimmed loads at their saved preset dim levels [default=50%]), press and hold to save a new Scene 2 preset;
SCENE 3: Press to recall the Scene 3 preset (switched loads on and dimmed loads at their saved preset dim levels [default=50%]), press and hold to save a new Scene 3 preset;
OFF: Press to turn all loads off, press and hold to lower the dimming level for all dimmable lighting loads;
Buttons are also used for creating presets, room setup, and factory reset |
| |
Buttons
(-KP10DBATT models) |
(6) Pushbuttons as follows:
ON: Press to recall the Scene 1 preset (switched loads on and dimmed loads at their saved preset dim levels [default=90%]);
Up Arrow: Press to raise the dimming level for all dimmable lighting loads;
Down Arrow: Press to lower the dimming level for all dimmable lighting loads;
SCENE 2: Press to recall the Scene 2 preset (switched loads on and dimmed loads at their saved preset dim levels [default=50%]), press and hold to save a new Scene 2 preset;
SENSOR DISABLE: Press to disable all room occupancy/vacancy and daylight sensors for one hour, press and hold to re-enable the sensors;
OFF: Press to turn all loads off, press and hold to lower the dimming level for all dimmable lighting loads;
Buttons are also used for creating presets, room setup, and factory reset |
| |
Buttons
(-KP10FBATT ENGRAVED models) |
(4) Pushbuttons with custom engraving. Functionality is identical to the –KP10BBATT version.[2] |
| |
Buttons
(-KP10GBATT ENGRAVED models) |
(6) Pushbuttons with custom engraving. Functionality is identical to the –KP10CBATT version.[2] |
| |
Feedback |
(1) Bi-color LED, green indicates a button press, red indicates a low battery condition when a button is pressed; also used for creating presets, room setup, and factory reset |
| Power |
| |
Battery |
(1) CR2032 3 Volt lithium coin cell disposable battery (included) |
| |
Battery Life |
≥5 years |
| Environmental |
| |
Temperature |
32° to 104° F (0° to 40° C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| Construction |
| |
Composition |
Plastic; almond, black, white, gray, or red smooth finish |
| |
Surface Mounting |
Adheres to a smooth, flat wall surface using double-sided tape (included) or screws (not included) |
| |
Wall Box Mounting |
Mounts to a 1-gang (or larger) electrical box |
| |
Faceplate |
Requires a decorator-style faceplate (sold separately) |
| Dimensions |
| |
Height |
4.26 in (109 mm) |
| |
Width |
1.76 in (45 mm) |
| |
Depth |
0.42 in (11 mm) |
| Weight |
| |
2.3 oz (65 g) |
| Compliance |
| |
UL Listed for US & Canada, IC, FCC Part 15 Class A digital device, UL 916, CEC Title 24 [4], ASHRAE 90.1 [5], IECC [6] |