Digital Lighting Splitter, 4 Channel, DIN Rail Mount
The DIN-GWDL-SPLTR expands the capability and flexibility of the DIN‑GWDL by providing four additional outputs for Crestron light fixtures and Crestron compatible third-party light fixtures.
NOTE: To order the DIN-GWDL-SPLTR as part of a configured system, use the Light Fixture Configuration Tool or call 1-888-273-7876 (option 3) for Sales Support Services and/or your Regional Sales Manager.
The DIN-GWDL-SPLTR expands the capability and flexibility of the DIN‑GWDL by providing four additional outputs for Crestron light fixtures and Crestron compatible third-party light fixtures.
DMX-C Control
Built on the DMX512 standard, DMX-C offers the speed and reliability of a traditional DMX system with the seamless and consistent user experience of the Crestron Home OS. When connected to a DIN‑GWDL, DMX-C lighting fixtures are auto-discovered, auto-addressed, and treated as native Crestron devices with a consistent and intuitive interface.
Supports up to 85 Crestron Light Fixtures and Crestron Compatible Third-Party Fixtures
The DIN‑GWDL has two DMX-C outputs, each of which supports up to 32 directly connected Crestron light fixtures and Crestron compatible third-party light fixtures, for a total of 64 directly connected fixtures. Each added DIN‑GWDL‑SPLTR adds four additional DMX-C outputs, each of which supports up to 32 directly connected Crestron light fixtures and Crestron compatible third-party light fixtures. The DIN‑GWDL with a DIN‑GWDL‑SPLTR can support a total of 85 Crestron light fixtures and Crestron compatible third-party light fixtures.
Fast Commissioning
Connect Crestron light fixtures and Crestron compatible third-party light fixtures quickly with the RJ-45 adapters. Verify the system immediately by testing lighting loads with local controls. Once connected to a Crestron Home processor through a DIN‑GWDL, DMX-C allows for lighting loads to be automatically addressed and discovered using the fixture identify tool.
Key Features
- Designed exclusively for Crestron Home® OS
- Provides 4 outputs, each supporting up to 32 directly connected Crestron light fixtures and Crestron compatible third-party light fixtures
- Expands the capability of the DIN-GWDL to support up to 85 Crestron light fixtures and Crestron compatible third-party light fixtures
- Expands wire run maximum 1000 ft (305 m) beyond the DIN-GWDL
- RJ-45 adapters included for quick wiring using standard CAT5 cable
- Order using the Crestron Light Fixture Configuration Tool
- 6U 35 mm DIN rail mountable
Supported Fixtures |
Crestron light fixtures |
Crestron compatible third-party light fixtures |
Communications |
DMX-C |
Supports discovery, auto-addressing and fixture data;
DMX-C communications with Crestron light fixtures and Crestron compatible third-party light fixtures |
Connections |
9-48VDC |
(1) 3-pin 5.18 mm terminal block;
9 - 48VDC, 4 W Max |
DMX IN |
(1) 3-pin 5.18 mm terminal bock;
Connect to DMX 1 or DMX 2 of DIN-GWDL
Termination:
Terminate the connection to a DIN-GWDL-SPLTR with the 120Ω termination resistor included with the DIN-GWDL-SPLTR between the + and - pins on the terminal block that connects to DMX IN |
OUT 1-4 |
(4) 3-pin 5.18 mm terminal blocks;
Isolated DMX-C outputs;
One universe split between four ports;
Each output supports up to 32 directly connected devices
Wiring:
Use shielded CAT5 wire or better with a shielded connector, do not connect drain to ground;
24 AWG minimum;
RJ-45 to 3-pin adapters included to make CAT5 STP connections;
Daisy chain all fixtures, do not create loops;
1,000 ft (305 m) maximum per output
Termination:
Terminate all daisy chain runs with the termination resistor included with the fixtures |
Controls and Indicators |
RESET button |
(1) Recessed push button for software reset |
PWR LED |
(1) Red LED indicates operating power is supplied |
ACTIVE LED |
(1) Red LED indicates device is active |
DMX LED |
(1) Red LED indicates DMX activity |
RDM LED |
(1) Red LED indicates RDM activity |
ERROR LED |
(1) Red LED indicates an error |
Power |
Power Pack |
9-8VDC;
Use Crestron power supplies PW-2407-RU, PW-2407WUL, DIN-PWS60, or DIN-PWS30-277 (all sold separately)
|
Power Consumption |
4 W max |
Environmental |
Temperature |
32° to 122°F (0° to 50°C) |
Humidity |
10% to 90% RH (noncondensing) |
Construction |
Mounting |
6 unit wide DIN rail mounting enclosure (DIN43880 / EN60715 (35/7.5 rail)) |
Ingress Protection |
IP40 |
Dimensions |
Height |
3.74 in. (95 mm);
5.62 in. (143 mm) with terminal blocks and RJ-45 adapters |
Width |
4.23 in. (108 mm) |
Depth |
1.57 in. (40 mm) |
Weight |
0.44 lb (0.2 kg) |
Compliance |
FCC, IC, CE, and UL® listed
To search for product certificates, refer to support.crestron.com/app/certificates. |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.