Products

    Pages

        CLW-DIMUEX-P-W-S

        Cameo® In-Wall Universal Phase Dimmer, 120 VAC, White Smooth

        The CLW-DIMUEX-P is a Cameo® in-wall universal phase dimmer that controls LED, incandescent, magnetic low voltage, and electronic low voltage loads. Its design matches the entire line of Cameo devices, making it a great addition to new or retrofit installations.

        Visit the Crestron® Lighting Fixture Compatibility page to find out which Crestron lighting devices have been tested and are compatible with third party lighting fixtures.

        The CLW-DIMUEX-P is a Cameo® in-wall universal phase dimmer that controls the following load types: LED, incandescent, magnetic low voltage, and electronic low voltage. Its design matches the entire line of Cameo products, making it a great addition to new or retrofit installations.

        Universal Phase Dimming
        The CLW-DIMUEX-P features auto-load detection to automatically select the appropriate dimming method for the attached load. Auto-load detection allows for broad load type compatibility even if future changes to the load are made.

        Integrated Keypad
        Supporting up to four buttons, the CLW-DIMUEX-P is configurable for a variety of applications. Because the dimmer is attached to the Crestron® control network, it can function as a keypad to trigger remote actions.

        Remote Dimmer
        The CLW-DIMUEX-P supports dimming control of the same lights from more than one location. The CLW-SLVU-P remote dimmer connects to the traveler wire in a traditional three- or four-way circuit and dims the load attached to the CLW-DIMUEX-P.

        Multigang Expansion
        Devices may be installed side-by-side in a multigang electrical box with a compatible decorator faceplate (sold separately).

        NOTE: Derating is required for multigang installations. Refer to the CLW-DIMUEX-P Quick Start at crestron.com/manuals (Doc. 8482) for derating information.

        infiNET EX Communications
        infiNET EX wireless technology provides two-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Each infiNET EX device acts as an expander by sending command signals to other infiNET EX devices in range (approximately 150 ft (46 m) indoors) to ensure reliability and stability.1

        The CLW-DIMUEX communicates with a control system via a CEN-GWEXER or newer infiNET EX Wireless Gateway (sold separately). Up to 100 infiNET EX devices may coexist on a single wireless network.

        Field-Replaceable Button Caps
        The preinstalled rocker button cap (CLW-BTN-RKR) on the CLW-DIMUEX-P is field-replaceable with the included small (CLW-BTN-SM) and large (CLW-BTN-LG) button caps, allowing for engravable multi-button configurations.

        Streamlined Installation
        In addition to field-replaceable buttons, the CLW-DIMUEX-P features screwclamp connectors for simplified wiring that reduces installation time and material costs. The CLW-DIMUEX-P can be installed in standard gang boxes, making them the perfect choice for both new and retrofit projects.

         
        Key Features
        • Universal dimming - reverse phase and forward phase - with auto load detection
        • Supports remote dimmers and switches
        • Single-gang U.S. wall box installation
        • Gangable up to three across using compatible multigang decorator faceplates
        • Robust infiNET EX® wireless communications
        • Preinstalled large rocker button
        • Configurable with up to four field-replaceable buttons
        • Custom laser-etched engravable buttons (sold separately)
        • Screw clamp connectors for easier & improved installation
        • LED Bargraph for load status feedback
        • Crestron Home™ OS 3 compatible
        1. Any infiNET EX device that provides expander functionality will effectively extend the range of the wireless network beyond the initial range of the gateway. Battery-powered infiNET EX devices do not provide expander functionality. A dedicated infiNET EXWireless Expander, model CLW-EXPEX, is also available.

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.

        This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, Crestron Home, Cameo, and infiNET EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2020 Crestron Electronics, Inc.

         
        Load Requirements
        Load Type LED, Incandescent, Electronic Low Voltage, or Magnetic Low Voltage
        Load Rating 600 W;
        No minimum load
        Power Requirements
        120 VAC, 50/60 Hz
        Controls
        Pushbutton (1) rocker button (CLW‑BTN‑RKR) preinstalled;
        Configurable with combinations of CLW‑BTN‑LG and CLW‑BTN‑SM in blank or engraved models
        Airgap (1) switch below buttons;
        Controls power to the front of the device and connected loads
        Program (1) pushbutton on right side of airgap switch;
        Accessible when airgap is closed;
        Used when changing the button assembly and setting preset levels
        Dimming Ramp Rate 3 seconds (default), software adjustable
        Preset Fade Time 1 second (default), software adjustable
        LED Indicator
        Feedback (7) White LEDs
        Bargraph (1) 7 segment bargraph display utilizing the 7 feedback LEDs
        Wireless
        RF Transceiver infiNET EX 2-way RF, 2.4 GHz ISM Channels 11‑26 (2400 to 2483.5 MHz), default channel 15;
        IEEE 802.15.4 compliant
        Range (typical) 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s);
        Subject to site-specific conditions and individual device capabilities1
        Gateway Requires a CEN-GWEXER or newer infiNET EX Wireless Gateway (sold separately)
        Connections
        Load (1) 14‑12 AWG, screw terminal;
        Red, load output
        Line (1) 14‑12 AWG, screw terminal;
        Brass, line power input
        Neutral (1) 14‑12 AWG, screw terminal;
        Silver, neutral
        Remote (1) 14‑12 AWG, screw terminal;
        Blue, remote
        Ground (1) 14‑12 AWG Class 1 flying lead;
        Green, ground
        Environmental
        Temperature 32° to 95° F (0° to 35° C)
        Humidity 10% to 90% RH (noncondensing)
        Enclosure
        Mounting Mounts in a 1‑gang U.S. electrical box or plaster ring (not included);
        3.5 in. (26 mm) electrical box depth recommended;
        Gangable up to three units
        Faceplate Requires a decorator style faceplate (not included)
        Dimensions
        Height 4.13 in. (105 mm)
        Width 1.75 in. (45 mm)
        Depth 1.75 in. (45 mm)
        Weight
        5 oz (142 g)
        Compliance
        FCC, IC, UL
        Click here to search product certificates.
        1. Any infiNET EX device that provides expander functionality will effectively extend the range of the wireless network beyond the initial range of the gateway. Battery-powered infiNET EX devices do not provide expander functionality. A dedicated infiNET EXWireless Expander, model CLW-EXPEX, is also available.

        This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.

        This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

        The specific patents that cover Crestron products are listed online at patents.crestron.com.

        Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

        Crestron, the Crestron logo, Crestron Home, Cameo, and infiNET EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2020 Crestron Electronics, Inc.

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.