QuickMedia FlipTop Computer Center - International Version, Black Anodized


        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        • Stylish flush-mount FlipTop housing
        • RGB/component input with stereo audio
        • Dual-channel gated mic/line preamp

        As the perfect front end for Crestron's MediaManager family of low-cost AV distribution products, the ingenious QuickMedia® FlipTop line provides a range of elegant, integrated multimedia interface and control solutions in a stylish flush-mount tabletop design.

        FlipTop Housing

        Handsomely finished in either black anodized or brushed aluminum, the QMI-FTCC mounts flush in any tabletop surface for a clean, professional appearance. The sleek design of the "FlipTop" lid features an integrated keypad to provide programmable pushbutton control at every interface location. Wiring for the QMI-FTCC is extremely simple requiring just a single CresCAT™QM cable (sold separately).

        Computer Interface

        Inputs are provided for one RGB/component signal with corresponding stereo audio to accept a connection from a computer or other high-resolution source. For complete connectivity, an RJ45 LAN pass-thru connector is included.

        International AC Power Outlet

        The QMI-FTCC includes an AC power receptacle within the FlipTop compartment. A choice of outlet types is available to accommodate virtually any country or region including UK, Europe (Schuko), Italy, France, Australia, and China.

        Integrated Keypad

        The customizable keypad provides 10 to 20 programmable pushbuttons for control of AV, lighting, and other functions. All button caps are engravable and include LED feedback indicators. Two LED bargraphs are also provided to display level settings and other parameters. To prevent accidental button presses, the keypad is automatically disabled whenever the lid is not

        fully opened.

        Gated Mic Preamp

        Two gated microphone inputs are included via terminal block connectors located below the table surface. Both dynamic and condenser type microphones are supported with software switchable 48V phantom power available at both microphone inputs. Balanced or unbalanced line-level sources such as wireless microphones can also be accommodated. Input gain and gating controls for each microphone/line input are fully adjustable at setup, and can also be controlled in real-time from a keypad or touchpanel.

        QuickMedia® Transport

        Using Crestron's revolutionary QuickMedia transport, all input signals are transmitted from the QMI-FTCC to any QuickMedia Receiver or Distribution Center over a single inexpensive CAT5e type cable*. Computer resolutions up to 1920 X 1200 pixels at 60Hz are supported over cable runs up to 450 feet. Audio signals are transmitted digitally with high-performance 24-bit

        resolution. QuickMedia dramatically simplifies system design and installation, affording a higher level of performance at a lower overall cost.

        MediaManager System Integration

        Whether using just one FlipTop Box or several, complete system operation can be made transparent to the end-user with all signal routing occurring smoothly under the command of the MediaManager control system. Built-in video sensing can be utilized to trigger automatic input selection and power control. Complete MediaManager systems are easy to design, program and adjust from start to finish using Crestron SystemBuilder™ software.

        Key Features
        • Stylish flush-mount FlipTop housing
        • RGB/component input with stereo audio
        • Dual-channel gated mic/line preamp
        • Video sensing | Auto-switching
        • Integrated keypad w/dual bargraphs
        • LAN pass-thru port
        • International AC power outlet
        • QuickMedia transport | Cresnet communications
        • Low-cost, quick and easy installation
        • Easy setup using Crestron SystemBuilder software
        • Optional cable management kit
          Signal Types RGB and component video†
          RGB Formats RGBHV, RGBS, or RGsB
          Video/HDTV Formats NTSC or PAL, HDTV up to 1080i/1080p†
          Gain 0dB (75 ohms terminated)
          Maximum Resolution 1920 x 1200 @ 60Hz (at unity gain) with maximum cable length of 450 feet and maximum compensation at receiver
          Features stereo audio input, 2-channel gated mic preamp
          Mic Input Gain 0 to 100 % (40dB range) plus mute
          Gate Level (Threshold) 0 to 100 %
          Attack 0 to 100 mS
          Decay (Release) 0 to 5000 mS
          A-D Conversion 24-bit, 48 kHz
          Frequency Response 20Hz to 20kHz
        Buttons & Indicators
          Keypad Programmable keypad allowing variable combinations of large and small engravable buttons, 10 minimum (all large) to 20 maximum (all small); ships with 10 large buttons (small buttons and engraving sold separately)
          Button Feedback (1) red LED per button, programmable
          Bargraphs (2) red 8-segment LED bargraphs, programmable
          PWR (1) green LED, indicates 24 Volts DC power supplied from Cresnet control network
          NET (1) yellow LED, indicates communication with Cresnet system
          SETUP (bottom) (1) miniature pushbutton and red LED, used for touch-settable ID (TSID)
        Connectors - Front Panel
          COMPUTER (1) DB15HD female, RGB(VGA)/component video† input;
        Formats: RGBHV, RGBS, RGsB, YPbPr;
        Input Impedance: 75 ohms
        H/V Sync Impedance: 1k ohms;
        Maximum Input Level: 1 Vp-p;
        Maximum H/V Sync Level: 5 Vp-p;
        Signal sensing on H, Y, and Gs
          AUDIO (1) 3.5mm TRS mini phone jack;
        Unbalanced stereo line-level audio input;
        Input Impedance: 10k ohms;
        Maximum Input Level: 1 Vrms
          LAN (1) 8-pin RJ45 female,Ethernet LAN pass-thru jack
          MAX 250V (1) Grounded AC socket, AC power pass-thru outlet;
        Specify Socket Type: PWR-AU-B (Australia/China), PWR-EU-B (Europe "Schuko"), PWR-FR-B (France), PWR-IT-B (Italy), or PWR-UK-B (UK);
        Maximum Load: 10 Amps @ 250 Volts AC, 50/60 Hz
        Connectors - Bottom Panel
          MIC/LINE 1 - 2 (2) 5-pin 3.5mm detachable terminal blocks;
        Balanced microphone/line inputs;
        Balanced Mic Input Level: -60 to -20 dBV nominal;
        Balanced Line Input Level: -28 to +12 dBV; 4 Vrms maximum;
        Unbalanced Line Input Level: -34 to +6 dBV; 2 Vrms maximum;
        Mic Input Impedance: 10k ohms, accepts 60 to 600 ohm source;
        Line Input Impedance: 22k ohms balanced, 11k ohms unbalanced;
        Phantom Power: 10 mA (total) @ 48 Volts DC, software enabled to both MIC inputs
          LAN (1) 8-pin RJ45 female;
        Passes through to front panel LAN jack
          MAX 250V (1) IEC socket;
        Passes through to front panel AC power outlet
          QM (1) 8-wire RJ45 female,QuickMedia output port;
        Connects to QM input port of any QuickMedia device via CresCAT-QM or CresCAT-IM cable*
          NET (2) 4-pin 3.5mm detachable terminal blocks;
        Cresnet slave ports, paralleled; connect to Cresnet control network via CresCAT-QM or Cresnet cable
          G (1) 6-32 screw, chassis ground lug
        Power Requirements
          Cresnet Power Usage 8 Watts (0.33 Amp @ 24 Volts DC)
          Temperature 41° to 104°F (5° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
          Black painted metal with black anodized or brushed aluminum cover; flush tabletop mountable
          Height 5.58 in (14.17 cm) with lid closed
          Width 8.50 in (21.58 cm)
          Depth 6.67 in (16.95 cm) without mounting brackets
          4.80 lb (2.18 kg)

        * For QuickMedia wiring use CresCAT-QM, CresCAT-IM, or quality CAT5e/CAT6 cable with a delay skew of ≤15nS per 100m; the maximum aggregate cable length and delay skew between any QM transmitter (origination point) and QM receiver (endpoint) is 450 ft (137 m) and 22 nS; a maximum of two QM midpoint devices may be inserted in a given QM signal path; exceptions apply, refer to each respective product manual for full detail.

        Component video or HDTV may require a suitable VGA-to-component adapter or breakout cable, not provided.

        Click here to search product certificates.
        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.