Products

    Pages

        C2N-FTB-D-B

        FlipTop™ Control Center, Black Anodized

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        Provides a stylish flush-mount tabletop control and connectivity solution.

        The C2N-FTB-D FlipTop™ Control Center by Crestron® provides an ingenious control and connectivity solution in a stylish flush mount tabletop design. Popping open the "FlipTop" lid exposes a pushbutton keypad, perfectly angled for easy access and intuitive operation. The built-in cable storage compartment keeps interface cables at the ready for plugging in laptop computers, mobile devices, AV sources, and other equipment.

        FlipTop Control Centers are ideal for use with AV distribution systems like Crestron DigitalMedia™, allowing the signal transmitters and receivers to be installed out of sight beneath the tabletop, with the user interface cables organized neatly within the cable storage compartment. The integrated keypad can be used to select sources, adjust the volume, and control display devices among other functions.

        FlipTop Housing

        Handsomely finished in a choice of black anodized or brushed aluminum, the C2N-FTB-D lends a contemporary metallic accent to conference tables and podiums. It mounts flush in virtually any flat, horizontal surface up to 1-13/16 inch (46 mm) thick for a clean, low-profile appearance.

        Integrated Keypad

        The customizable keypad provides 10 to 20 programmable pushbuttons for control of AV, lighting, and other functions. All button caps are custom engravable[1] and include LED feedback indicators. Two LED bargraphs are also provided to display level settings and other parameters. To prevent accidental button presses, the keypad is automatically disabled whenever the lid is not fully opened.

        Cable Storage Compartment

        The C2N-FTB-D provides easy pull-out storage for Crestron Certified Interface Cables[2] and a wide variety of other AV, data, and communication cables. Eight grommeted holes are provided in the bottom of the storage compartment to accommodate either premade or custom cables, allowing each cable to be pulled out smoothly as needed. When not in use, the user end of each cable stows neatly within the storage compartment while excess cable simply drops out-of-sight below the box.

        Cable Retractor Option

        For an even more refined cable management solution, the C2N-FTB-D accommodates up to three Crestron CBLR2 Series Cable Retractors. Crestron cable retractors feature a patented mechanism that ensures smooth operation while eliminating hanging cable loops beneath the table.[3]

        Dual AC Power Outlets

        For complete connectivity, the C2N-FTB-D includes two AC power receptacles within the FlipTop compartment.

         
        Key Features
        • Stylish flush-mount FlipTop™ housing
        • Integrated keypad with dual bargraphs
        • Easy pull-out universal cable management
        • Optional cable retractors
        • Dual AC power outlets
        • Cresnet® communications
        • Black anodized or brushed aluminum finish
        1. Ships with 10 single large button caps. Dual small button caps and all custom engraving sold separately.
        2. Interface cables sold separately.
        3. Adding the cable retractor option removes all eight of the standard grommeted cable holes. Cable retractors and related accessories are sold separately. See the CBLR2 spec sheet for more information.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Crestron, the Crestron logo, Cresnet, DigitalMedia, and FlipTop are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2014 Crestron Electronics, Inc.

         
        Buttons & Indicators
          Keypad Programmable keypad allowing variable combinations of large and small engravable buttons, 10 minimum (all large) to 20 maximum (all small)[1]
          Button Feedback (1) red LED per button, programmable
          Bargraphs (2) red 8-segment LED bargraphs, programmable
          PWR (1) green LED, indicates DC power supplied from the Cresnet® control network
          NET (1) yellow LED, indicates communication with the Cresnet system
          SETUP (bottom) (1) miniature pushbutton and red LED, used for touch-settable ID (TSID)
        Communications
          Cresnet Cresnet slave mode
        Connectors – Front Panel
          125V~50/60Hz 10A (2) Grounded AC sockets, AC power pass-thru outlets;
        Maximum Load: 10 Amps (total) @ 125 Volts AC, 50/60 Hz
        Connectors – Bottom Panel
          125V~50/60Hz 10A (1) 9 ft grounded AC line cord;
        Passes through to front panel AC power outlets
          NET (2) 4-pin 3.5mm detachable terminal blocks;
        Cresnet slave ports, paralleled;
        Connect to Cresnet control network
          G 6-32 screw, chassis ground lug
        Power Requirements
          Cresnet Power Usage 2 Watts (0.083 Amp @ 24 Volts DC)
        Environmental
          Temperature 41° to 104°F (5° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
          Heat Dissipation 6 BTU/hr
        Enclosure
          Chassis Metal, black
          Cover Aluminum, black anodized or brushed aluminum finish
          Keypad Plastic, black, engravable buttons[1]
          Mounting Flush tabletop mount, 1-13/16 in (46 mm) maximum surface thickness, 5-5/16 in (135 mm) deep x 6-3/8 in (162 mm) wide cutout (template provided)
        Dimensions
          Height 5.39 in (137 mm) with lid closed
          Width 6.75 in (172 mm)
          Depth 5.71 in (145 mm), 7.21 in (184 mm) with mounting brackets
        Weight
          3.75 lb (1.70 kg)
        Click here to search product certificates.
        1. Ships with 10 single large button caps. Dual small button caps and all custom engraving sold separately.
        2. Interface cables sold separately.
        3. Adding the cable retractor option removes all eight of the standard grommeted cable holes. Cable retractors and related accessories are sold separately. See the CBLR2 spec sheet for more information.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Crestron, the Crestron logo, Cresnet, DigitalMedia, and FlipTop are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2014 Crestron Electronics, Inc.

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.