Products

    Pages

        QM-FTMCSC-NB-B

        QuickMedia FlipTop Media Center with Cable Storage Compartment, no keypad, black anodized

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        • Stylish flush-mount FlipTop housing
        • Composite, S-Video and RGB/component inputs
        • 3 stereo audio and 2 gated mic/line inputs

        The QM-FTCC-NB provides an elegant multimedia interface solutions in a stylish flush-mount tabletop design.

        FlipTop Housing

        Handsomely finished in either black anodized or brushed aluminum, the QM-FTMCSC-NB mounts flush in any tabletop surface for a clean, professional appearance. Wiring for the QM-FTMCSC-NB is extremely simple requiring just a single CresCAT™QM cable (sold separately).

        Multimedia Interface

        Individual inputs are provided for composite, S-Video, and RGB/component signals, each with corresponding stereo audio, to accept connections from portable AV devices and computers. For complete connectivity, the QM-FTMCSC-NB also includes an AC power receptacle.

        Cable Storage Compartment

        Connectivity for computer signals is facilitated using easy pull-out RGB and audio cables (included), which attach to inputs hidden beneath the table surface and stow neatly within the FlipTop compartment when not in use. Excess cable simply drops out-of-sight below the box through

        grommeted holes provided in the bottom plate. Network connectivity is easily included using any third-party LAN cable.

        AV Switcher and Mic Preamp

        The built-in 3X1 switcher includes audio breakaway to allow the three program audio inputs to be switched independent of the video and RGB inputs. Additionally, two gated microphone inputs are included via terminal block connectors located below the table surface. Both dynamic and

        condenser type microphones are supported with software switchable 48V phantom power available at both microphone inputs. Balanced or unbalanced line-level sources such as wireless microphones can also be accommodated. Input gain and gating controls for each microphone/line input are fully adjustable at setup, and can also be controlled in real-time from a keypad or touchpanel.

        QuickMedia® Transport

        Using Crestron's revolutionary QuickMedia transport, all input signals are transmitted from the QM-FTMCSC-NB to any QuickMedia Receiver or Distribution Center over a single inexpensive CAT5e type cable*. Computer resolutions up to 1920 X 1200 pixels at 60Hz are supported over cable runs up to 450 feet. Audio signals are transmitted digitally with high-performance 24-bit resolution. QuickMedia dramatically simplifies system design and installation, affording a higher level of performance at a lower overall cost.

        MediaManager System Integration

        Whether using just one FlipTop Box or several, complete system operation can be made transparent to the end-user with all signal routing occurring smoothly under the command of the MediaManager control system. Built-in video sensing on every video/RGB input can be utilized to trigger automatic input selection and power control. Complete MediaManager systems are easy to design, program and adjust from start to finish using Crestron SystemBuilder™ software.

         
        Key Features
        • Stylish flush-mount FlipTop housing
        • Composite, S-Video and RGB/component inputs
        • 3 stereo audio and 2 gated mic/line inputs
        • 3X1 switcher with audio breakaway
        • Video sensing | Auto-switching
        • LAN cable pass-thru and AC power outlet
        • QuickMedia transport | Cresnet communications
        • Low-cost, quick and easy installation
        • Easy setup using Crestron SystemBuilder software
        • Easy pull-out VGA cable management
         
        Video
          Signal Types RGB and composite, S-Video, or component† video
          Video/HDTV Formats NTSC or PAL, HDTV up to 1080i/1080p†
          RGB Formats RGBHV, RGBS, or RGsB
          Gain 0dB (75 ohms terminated)
          Maximum Resolution 1920 x 1200 @ 60Hz (at unity gain) with maximum cable length of 450 feet and maximum compensation at receiver
        Audio
          Features 3X1 stereo audio switcher, 2-channel gated mic preamp
          Mic Input Gain 0 to 100 % (40dB range) plus mute
          Gate Level (Threshold) 0 to 100 %
          Attack 0 to 100 mS
          Decay (Release) 0 to 5000 mS
          A-D Conversion 24-bit, 48 kHz
          Frequency Response 20Hz to 20kHz
        Buttons & Indicators
          SETUP (bottom) (1) miniature pushbutton and red LED, used for touch-settable ID (TSID)
        Connectors - Front Panel
          S-VIDEO (1) 4-pin mini DIN female, S-Video (Y/C) input;
        Input Impedance: 75 ohms;
        Maximum Input: 1 Vp-p;
        Signal sensing on Y
          AUDIO (S-Video) (2) RCA female, unbalanced stereo line-level audio input;
        Input Impedance: 10k ohms;
        Maximum Input Level: 2 Vrms
          VIDEO (1) RCA female, composite video input;
        Input Impedance: 75 ohms;
        Maximum Input: 1 Vp-p;
        Includes signal sensing
          AUDIO (video) (2) RCA female;
        Unbalanced stereo line-level audio input;
        Input Impedance: 10k ohms;
        Maximum Input Level: 2 Vrms
          125V (1) Grounded AC socket, AC power pass-thru outlet;
        Maximum Load: 10 Amps @ 125 Volts AC, 50/60 Hz
        Connectors - Bottom Panel
          COMPUTER (1) DB15HD female, RGB(VGA)/component video† input;
        Formats: RGBHV, RGBS, RGsB, YPbPr;
        Input Impedance: 75 ohms;
        H/V Sync Impedance: 1k ohms;
        Maximum Input Level: 1 Vp-p;
        Maximum H/V Sync Level: 5 Vp-p;
        Signal sensing on H, Y, and Gs;
        Connects to 6 ft VGA patch cable (included)
          AUDIO (1) 3.5mm TRS mini phone jack;
        Unbalanced stereo line-level audio input;
        Input Impedance: 10k ohms;
        Maximum Input Level: 1 Vrms;
        Connects to 6 ft mini-TRS audio patch cable (included)
          MIC/LINE 1 - 2 (2) 5-pin 3.5mm detachable terminal blocks;
        Balanced microphone/line inputs;
        Balanced Mic Input Level: -60 to -20 dBV nominal;
        Balanced Line Input Level: -28 to +12 dBV; 4 Vrms maximum;
        Unbalanced Line Input Level: -34 to +6 dBV; 2 Vrms maximum;
        Mic Input Impedance: 10k ohms, accepts 60 to 600 ohm source;
        Line Input Impedance: 22k ohms balanced, 11k ohms unbalanced;
        Phantom Power: 10 mA (total) @ 48 Volts DC, software enabled to both MIC inputs
          125V (1) 9 ft grounded AC line cord;
        Passes through to front panel AC power outlet
          QM (1) 8-wire RJ45 female, QuickMedia output port;
        Connects to QM input port of any QuickMedia device via CresCAT-QM or CresCAT-IM cable*
          NET (2) 4-pin 3.5mm detachable terminal blocks;
        Cresnet slave ports, paralleled; connect to Cresnet control network via CresCAT-QM or Cresnet cable
          G (1) 6-32 screw, chassis ground lug
        Power Requirements
          Cresnet Power Usage 8 Watts (0.33 Amp @ 24 Volts DC)
        Environmental
          Temperature 41° to 104°F (5° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
        Enclosure
          Black painted metal with black anodized or brushed aluminum cover; flush tabletop mountable
        Dimensions
          Height 5.39 in (13.69 cm) with lid closed
          Width 6.75 in (17.14 cm)
          Depth 5.71 in (14.50 cm) without mounting brackets
        Weight
          4.05 lbs (1.84 kg)

        * For QuickMedia wiring use CresCAT-QM, CresCAT-IM, or quality CAT5e/CAT6 cable with a delay skew of ≤15nS per 100m; the maximum aggregate cable length and delay skew between any QM transmitter (origination point) and QM receiver (endpoint) is 450 ft (137 m) and 22 nS; a maximum of two QM midpoint devices may be inserted in a given QM signal path; exceptions apply, refer to each respective product manual for full detail.

        Component video or HDTV may require a suitable VGA-to-component adapter or breakout cable, not provided.

        Click here to search product certificates.
        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.