Products

    Pages

        CLF-DIMRFB

        infiNET™ Lamp Dimmer

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        The CLF-DIMRFB is a free-standing dimmer module designed to sit on the floor to provide dimming control of a conventional floor lamp or table lamp. It enables local dimming control via a built-in footswitch, and also operates as part of a complete Crestron automation system communicating via the infiNET wireless control network.

        The CLF-DIMRFB is a free-standing dimmer module designed to sit on the floor to provide dimming control of a conventional floor lamp or table lamp. It enables local dimming control via a built-in footswitch, and also operates as part of a complete Crestron automation system communicating via the infiNET wireless control network.

         
         
        Load Ratings
          Incandescent/Tungsten Halogen 500 Watts/VA
        Power Requirements
          120 Volts AC, 60Hz
        Controls
          Button foot-operated pushbutton, toggles between on (at preset level) and full-off
          Mode Switch 3-position slide switch; selects RUN, SET, or OFF mode
        LED Indicator
          (1) Amber LED, flashes in various patterns to warn when in SET mode, to indicate that a preset has been stored, and to indicate setup and communication status; normally glows dim in RUN mode to provide a locating beacon in the dark
        Wireless
          RF Transceiver 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.6 MHz), IEEE 802.15.4 compliant
          Range (typical) 150 feet indoor, 250 feet outdoor;
        Subject to site-specific conditions; range is increased by adding additional devices or C2N-MNETRPT repeater
          Gateway Requires a C2N-MNETGW RF gateway
        Connections
          Line (1) 6 ft (1.83 m) grounded AC power cord, right-angle plug
          Load (1) ungrounded AC power socket
        Environmental
          Temperature 32° to 104°F (0° to 40°C)
          Humidity 10% to 90% RH (non-condensing)
        Enclosure
          free-standing, black metal with high-impact injection-molded plastic footswitch
        Dimensions
          Height 2.38 in (6.03 cm)
          Width 3.15 in (8.01 cm)
          Depth 3.69 in (9.37 cm)
        Weight
          0.90 lb (0.41 kg)
        Click here to search product certificates.
        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.