4TB Network Attached Storage


        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        Easy plug and play storage expansion for the ADMS Intermedia Delivery System™.

        The CEN-NAS-4TB provides a simple storage expansion solution for the ADMS Intermedia Delivery System™. It comes pre-configured for the ADMS, and features four hot-swappable 1TB hard drives with RAID 5 protection, all in a single rack space. It can store 1500 standard definition movie downloads, and well over 300,000 songs (compressed @ 320kbps).

        Managing media files on the CEN-NAS-4TB is simple since it appears as a network drive on a Windows, Mac, or Linux computer. Simply drag and drop files onto the CEN-NAS-4TB, and the ADMS automatically adds them to the media library.

        Configuring network settings is facilitated through a Web browser.

        RAID 5 protection keeps all your data safe against loss due to a disk error or drive failure. In the unlikely event of a failure, the CEN-NAS-4TB can send an email alert message, as well as sounding an audible alarm. Replacing a failed drive can be accomplished easily by simply swapping out the drive right from the front panel without even having to shutdown or reboot.

        Key Features
        • Plug and play storage expansion for the ADMS
        • Can store 1500 standard definition movie downloads
        • Can store 150,000 songs in lossless format, and well over 300,000 compressed @ 320kbps
        • Contains 4 high-performance Seagate® Pipeline HD™ Pro hard drives for quiet, reliable operation
        • RAID 5 protection prevents any data loss if any single drive fails
        • Front access drive bays allow hot swappable drive replacement
        • Provides automatic email notification of any disk error
        • Allows easy configuration via Web browser
        • Single-space 19" rack-mountable
          500MHz, 32bit@DDR333, with floating point
          RAM 128MB
          Internal Hard Drives 4TB RAID 5 (stripe and mirror) SATA Hard Drive Array (4 x 1TB, hot-swappable), 3TB available for media storage
          10/100/1000BaseT, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, CIFS, AFP (3.1), FTP, NFS, IEEE 802.3U compliant
          Firewall, Auto-Block, "FTP over SSL (explicit)" or "FTP over TLS (explicit)", Encrypted Network Backup, Encrypted rsync, HTTPS Connection
          100-240V~50/60Hz 5A (1) IEC C14 male chassis plug;
        Mates with removable power cord (included)
          LAN 1 – 2 (2) 8-wire RJ45 female;
        10/100/1000BaseT Ethernet ports
          USB 1 – 2 (2) USB Type A female, not used
          eSATA (1) eSATA port, not used
          FOR FACTORY USE ONLY (1) DB9 male, not used
        Controls & LED Indicators
          Power Pushbutton and green LED, used to boot up or shut down the unit; LED indicates boot, shut down, and ready status
          LAN 1 – 2 (2) green LEDs, indicate network connection status and activity
          DRIVE 1 – 4 (4) green LEDs, indicate hard drive status and activity
          Alarm Silence (1) Pushbutton, silences the audible alarm following a drive failure
          STATUS (1) green LED, indicates storage volume status
        Power Requirements
          Main Power 5 Amps @ 100-240 Volts AC, 50/60 Hz
          Temperature 40° to 95°F (5° to 35°C)
          Humidity 5% to 95% RH (non-condensing)
          1U 19-inch rack-mountable (rack ears included);
        Fan-cooled, front and rear ventilation should not be restricted
          Height 1.74 in (4.42 cm)
          Width 18.89 in (47.99 cm)
          Depth 18.14 in (46.08 cm)
          15.9 lb (7.2 kg)
        Click here to search product certificates.
        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.