Operating System |
| Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; SIMPL Windows, SIMPL+®, and SystemBuilder™ programmable |
Memory |
| Flash | 16 MB |
| SDRAM | 32 MB |
| NVRAM | 256 kB |
Communications |
| Ethernet | 10/100 Mbps; auto-switching; auto-negotiating; auto-discovery; full/half duplex; TCP/IP; UDP/IP; CIP; SSL; SNMP; built-in Web server and SMTP e-mail client; supports Crestron Mobile™, e-Control® 2 XPanel, Fusion RV™ and RoomView® applications |
| Cresnet® | Cresnet master mode |
| USB | Supports computer console via front panel USB 1.1 device port |
| RS-232 | Supports 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking; supports computer console via rear panel COMPUTER port |
| IR/Serial | Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; supports CNXRMIRD IR Receiver[2] |
Graphic Engine (OSD) |
| 16-bit non-palette graphics; 65,536 colors; Synapse image rendering algorithm; multi-mode objects, PNG translucency, full-motion (60 fps) animation, transition effects |
Graphics Memory |
| Flash | 32 MB |
| SDRAM | 32 MB |
Video |
| Scaling Processor | Gennum VXP™ with dual channel image processor |
| Input Signal Types | HDMI, DVI, component (YPbPr), S-Video (Y/C), and composite video |
| Output Signal Types | HDMI, DVI, component (YPbPr), RGB |
| Input Formats | HDMI, HDCP content protection support, NTSC or PAL SDTV, HDTV up to 1080p60, computer up to UXGA/WUXGA |
| Input Resolutions, Interlaced | 480i, 576i, 1080i |
| Input Resolutions, Progressive | 640 x 480 minimum to 1600 x 1200 @ 60Hz maximum |
| Output Resolutions, HDMI/DVI, Progressive | 480p60, 576p50, 720p50, 720p60, 1080p50, 1080p60, 680x480 60Hz, 680x480 75Hz, 800x600 60Hz, 800x600 75Hz, 1024x768 60Hz, 1024x768 75Hz, 1280x768 60Hz, 1280x768 75Hz, 1280x1024 60Hz, 1280x1024 75Hz, 1400x1050 60Hz, 1400x1050 75Hz, 1600x1200 60Hz, 1680x1050 60Hz |
| Output Resolutions, Component/RGB, Progressive | 480p60, 576p50, 720p50, 720p60, 680x480 60Hz, 680x480 75Hz, 800x600 60Hz, 800x600 75Hz, 1024x768 60Hz, 1024x768 75Hz, 1280x768 60Hz, 1280x768 75Hz, 1280x1024 60Hz, 1280x1024 75Hz, 1400x1050 60Hz, 1400x1050 75Hz, 1680x1050 60Hz |
| Performance (analog) | Gain: 0dB (75 ohms terminated); Bandwidth: 400MHz; Crosstalk: >54dB; S/N: >70dB |
Audio – Surround Sound Processor |
| Processor | 32-bit floating point DSP w/Audyssey MultEQ® XT setup algorithms |
| Analog-To-Digital Conversion | 24-bit 48 kHz |
| Digital-To-Analog Conversion | 24-bit 48 kHz |
| Supported Formats/Modes | Bypass, Stereo, 2-channel steering (surround or rear), Multi-channel stereo, Ambience Effects (Cathedral, Hall, Stadium, Jazz Club), Dolby® Pro Logic IIx, Dolby Digital 5.1, Dolby Digital EX, DTS® Neo:6, DTS Digital 5.1 Discrete, DTS ES 6.1 Discrete, DTS ES 6.1 Matrix, DTS 96/24 |
| Surround Sound Master Volume | -80dB to +20dB, 0.5dB steps |
| Speaker Compensation | ±12dB, 0.5dB steps |
| Low Frequency Effects (LFE) | -10dB to +0dB, 0.5dB steps |
| Mode Trim (Level Preset) | ±12dB, 0.5dB steps (master); ±12dB, 0.5dB steps (per output); -10dB to +0dB, 0.5dB steps (LFE) |
| Input Compensation | ±10dB, 1 dB steps |
| Mute | -80dB (electronic), >-100dB (relay) |
| Bass Gain Range | ±12dB, 1 dB steps |
| Treble Gain Range | ±12dB, 1 dB steps |
| EQ Modes | Audyssey MultEQ XT, 6-band parametric, or 6-band graphic per surround/subwoofer output channel |
| PEQ Filter Gain | ±12dB, 0.5dB steps |
| PEQ Filter Bandwidth | 0.02 to 2.0 octaves |
| PEQ Filter Center Frequency | 20Hz to 20kHz |
| GEQ Filter Gain | ±10dB, 0.5dB steps |
| GEQ Filter Center Frequencies | 50, 180, 630, 2.3k, 8k Hz |
| Crossover/High-Pass Frequency | 40 to 200 Hz, 10Hz steps |
| Maximum Delay | 80mS per channel, picture delay (lip-sync) and speaker distance compensation combined |
| Dynamic Range (compression) | Minimum, Standard, Maximum |
| Frequency Response | 20Hz to 20kHz ±0.01dB (preamp); 20Hz to 20kHz ±0.2dB (power amp) |
| THD+N | <0.006% (preamp), 0.03% (power amp), 20Hz to 20kHz |
| S/N Ratio | >100dB (preamp), 100dB (power amp) 20Hz to 20kHz A-weighted |
| Dynamic Range | >113dB |
| Channel Separation | >85dB (preamp), >80dB (power amp) |
| Output Power | 100 Watts per channel at 8 Ohms; 130 Watts per channel at 4 Ohms |
Audio – Multiroom Distribution |
| Typical of up to 5 Stereo, or 4 Stereo + 2 Mono Room Outputs: |
| Controls | Volume, Balance, Bass, Treble, Loudness, Mute, Mono, Input Compensation |
| Volume Gain Range | -80dB to +20dB, 1 dB steps |
| Mute | -100dB (electronic), -120dB (relay/room off) |
| Input Compensation | ±10dB, 1 dB steps |
| Bass Gain Range | ±12dB, 2 dB steps |
| Treble Gain Range | ±12dB, 2 dB steps |
| Frequency Response | 20Hz to 20kHz ±0.4dB |
| S/N Ratio | >100dB, 20Hz to 20kHz A-weighted |
| THD+N | <0.08%, 20Hz to 20kHz |
| Stereo Separation | >75dB |
| Output Power | 45 Watts per channel at 8 Ohms; 60 Watts per channel at 4 Ohms |
LCD Display |
| Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight |
Controls and Indicators |
| THEATER OFF | Pushbutton with green LED, turns off all theater outputs |
| MUTE | Pushbutton with red LED, mutes audio in currently selected room (defaults to theater) |
| MODE/MENU | (8) Pushbuttons, select mode or menu item for adjustment: SOURCE, ROOM, HOUSE, MENU, SURRND, THEATER, DISPLAY, MORE (refer to manual) |
| SOFTKEYS | (4) LCD display-driven pushbuttons, select/activate various functions |
| ROOMS, SOURCES | (12) Pushbuttons with green LEDs and backlit labeling strip, select room(s), input source(s), PARTY MODE, and ALL OFF |
| SELECT | Continuous turn rotary encoder with adjoining “ENTER” pushbutton with green LED, for selecting sources, surround modes, rooms, radio stations, and other parameters |
| VOLUME | Continuous turn rotary encoder, adjusts volume of selected room (defaults to theater) |
| H | Hardware reset button, recessed, reboots the control system |
| S | Software reset button, recessed, restarts the SIMPL program |
Connectors – Video |
| COMPONENT INPUTS 1 – 8 | (24) RCA female comprising (8) component/HDTV (YPbPr) video inputs; Input signal sensing on “Y”; Input Level: 1 Vp-p nominal (Y), 0.7 Vp-p nominal (PbPr); Input Impedance: 75 ohms nominal |
| S-VIDEO 1 – 4 | (4) 4-pin mini-DIN female; S-Video (Y/C) video inputs w/input signal sensing on “Y”; Input Level: 1 Vp-p nominal (Y), 0.7 Vp-p nominal (C); Input Impedance: 75 ohms nominal |
| VIDEO 1 – 4 | (4) RCA female; Composite video inputs w/input signal sensing; Input Level: 1 Vp-p nominal; Input Impedance: 75 ohms nominal |
| COMPONENT/RGB OUTPUT | (5) BNC female; RGB or component/HDTV video output; Formats: RGBHV or YPbPr; RGB Output Level: 0.7 Vp-p nominal; HV Sync Output Level: TTL, 5 Vp-p; YPbPr Output Level: 1 Vp-p nominal (Y), 0.7 Vp-p nominal (PbPr); Horizontal Frequency: 31.25 to 75 kHz; Vertical Frequency: 50 to 75 Hz |
| DVI-D IN | (1) 24-pin DVI-D female, DVI digital video input |
| DVI-D OUT | (1) 24-pin DVI-D female, DVI digital video output |
| HDMI INPUT 1 – 3 | (3) 19-pin Type A HDMI female, HDMI digital video/audio inputs |
| HDMI OUTPUT | (1) 19-pin Type A HDMI female, HDMI digital video/audio output |
Connectors – Audio |
| SLOT 1 – 3 | (3) Adagio tuner card slots; accept choice of ATC-series tuner cards; Outputs from the tuner cards parallel to ANALOG SOURCES 1 – 6 |
| MULTI-CHANNEL SOURCE | (8) RCA female; Unbalanced line-level 7.1 Surround Sound audio inputs; Maximum Input: 3.2 Vrms (flat); Input Impedance: 47k ohms |
| ANALOG SOURCES 1 – 10 | (20) RCA female comprising (10) unbalanced stereo line-level audio inputs; Inputs 1 through 6 parallel with outputs from tuner card slots; Maximum Input: 3.2 Vrms (flat); Input Impedance: 47k ohms |
| DIGITAL SOURCES 1 – 6 | (6) RCA female; S/PDIF coaxial digital audio inputs; Input Impedance: 75 ohms |
| DIGITAL SOURCES 7 – 10 | (4) JIS F05 female (TOSLINK) optical fiber connectors; S/PDIF optical digital audio inputs |
| OUTPUT | (2) RCA female; Unbalanced stereo line-level audio output containing a stereo mix of all internal surround sound processor outputs; Maximum Output Level: 2.5 Vrms; Output Impedance: 50 ohms |
| PRE-AMP OUTPUT | (8) RCA female; Unbalanced line-level 7.1 surround sound audio outputs; Maximum Output Level: 2.5 Vrms (front, surround, back, center); 6.3 Vrms (sub); Output Impedance: 50 ohms |
| SUB (balanced) | (1) 3-pin 3.5mm detachable terminal block; Balanced line-level subwoofer audio output; Maximum Output Level: 12.6 Vrms; Output Impedance: 100 ohms |
| ROOM 1 – 4 | (8) 2-pin 7.62mm detachable terminal blocks; Multi-room amplifier outputs; Wire Size: Terminals accept up to 12 AWG; Output Power: 45 Watts/Ch. at 8 ohms, 60 Watts/Ch. at 4 ohms |
| FRONT, CENTER, SURROUND, BACK or ROOM 5/6 | (7) 2-pin 7.62mm 20A detachable terminal blocks; Surround sound amplifier outputs; Wire Size: Terminals accept up to 10 AWG; Output Power: 100 Watts/Ch. at 8 ohms, 130 Watts/Ch. at 4 ohms |
| Microphone (front) | (1) 3.5mm TRS mini-phone jack (behind label strip); Input for calibrated microphone (part of CSSTK Surround Sound Tuning Kit[2]) |
Connectors – Control |
| NET 1 – 6 | (6) 4-pin 3.5mm detachable terminal blocks; Cresnet Master ports, provide data and power for keypads and other Cresnet devices |
| IR OUT 1 – 8 | (8) 3.5mm TRS mini-phone jacks, IR/Serial ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5V) up to 9600 baud |
| IR IN | (1) 3.5 mm TRS mini-phone jack; For connection of the CNXRMIRD IR receiver[2]; Allows IR wireless control from Crestron and third-party remotes using RC-5 IR commands[1] |
| INPUT 1 – 4 | (1) 5-pin 3.5mm detachable terminal block; Comprises (4) digital inputs; Rated for 0-24 Volts DC, referenced to GND; Input Impedance: 2.2k ohms pulled up to 5 Volts DC; Logic Threshold: 2.5 Volts DC nominal |
| RELAY OUTPUT 1 – 4 | (1) 8-pin 3.5mm detachable terminal block; Comprises (4) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts |
| COM A – B | (2) DB9 male, bidirectional RS-232 ports; Up to 115.2k baud, hardware and software handshaking support |
| COMPUTER | (1) 6-pin RJ11 female, bidirectional RS-232 computer console port |
| LAN | (1) 8-wire RJ45 with 2 LED indicators, 10Base-T/100Base-TX Ethernet port; Green LED indicates link status, Yellow LED indicates Ethernet activity |
| NET | (2) 4-pin 3.5mm detachable terminal blocks; Cresnet Master ports, paralleled with NET ports 1 through 6; Normally connect to AAE(s) |
| USB (front) | (1) USB Type B female (behind label strip); USB 1.1 computer console port (cable included) |
Connectors – Power |
| FUSE (US/North America) | Main fuse, T10AH; (1/4” x 1-1/4”, 250V, 10A, time-lag, high-rupture rated) |
| FUSE (International) | Main fuse, T5AH; (5mm x 20mm, 250V, 5A, time-lag, high-rupture rated) |
| 120V~50-60Hz (US/North America) | (1) IEC C14 male chassis plug; Mates with removable power cord (included) |
| 220V-240V~50-60Hz (International) | (1) IEC C14 male chassis plug; Mates with removable power cord (included) |
| G | 6-32 screw, chassis ground lug |
Power Requirements |
| Main Power (US/North America) | 1000 Watts (8 Amps) @ 120 Volts AC, 50-60Hz |
| Main Power (International) | 1000 Watts (4 Amps) @ 220-240 Volts AC, 50-60Hz |
| Available Cresnet Power | 20 Watts (0.83 Amps @ 24 Volts DC) |
Environmental |
| Temperature | 41° to 104°F (5° to 40°C) |
| Humidity | 10% to 90% RH (non-condensing) |
| Heat Dissipation | 1600 BTU/hr @ 8 ohms, 2000 BTU/hr @ 4 ohms; all channels loaded to 1/8 full power |
Enclosure |
| Black metal with molded ABS/PC front panel; Freestanding, side ventilation should not be restricted |
Dimensions |
| Height | 7.39 in (188 mm) |
| Width | 17.16 in (436 mm) |
| Depth | 18.80 in (478 mm) |
Weight |
| 57.5 lb (26.1 kg) |
to search product certificates.