Online Help

Products

    Pages

        Master photo:V24-IMCW-C
        Add to Favorites

        V24-IMCW-C

        Interface Module for V24R-C & V24RL-C

        Discontinued

        This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

        Provides a simple, passive pluggable connection for V-Panel™ V24R-C and V24RL-C touch screens.

        Have a question?
        Add to a Project
        Find a Dealer

        The V24-IMCW-C is an interface module designed for use with a V24R-C or V24RL-C V-Panel™ 24" HD Touch Screen Display. It affords a convenient pluggable connection for the touch screen, providing front panel jacks for DigitalMedia 8G+™ (DM 8G+™) and power. On the rear is a DM 8G+ pass-thru jack for connection to a DM 8G+ transmitter or switcher[1]. Power is provided to the V24-IMCW-C by an external power pack[2], which may be connected to either the front or rear panel.

        Every V24R-C and V24RL-C touch screen ships with one V24-IMCW-C included. The V24-IMCW-C may also be purchased separately for use with a V24R-WALL-C touch screen.

        Using the hardware provided, the V24-IMCW-C can be mounted in a 1-gang electrical box, to a flat surface, or to a 19-inch rack-rail.

         
        Key Features
        • Provides a wall plate connection for a V-Panel™ 24" HD Touch Screen Display
        • Mounts in a single-gang electrical box or mud ring
        • Includes inserts to match black, white, or almond faceplates
        • Includes surface mount and rack-rail installation options
        • Provides pass-thru connections for 24VDC power and DigitalMedia 8G+™
        1. For DM 8G+ wiring, use Crestron DM-CBL-8G DigitalMedia 8G Cable or generic CAT5e (or better) UTP or STP. Maximum wire length for DM 8G+ is 330 ft (100 m) between devices. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the DigitalMedia™ Design Guide, Doc. #4546 for complete system deisgn guidelines. All wire and cables sold separately.
        2. Item(s) sold separately or included with touch screen display.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Crestron, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G+, V-Panel, and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. ©2012 Crestron Electronics, Inc.

         
        Connectors & Indicators – Front Panel
          TO PANEL – DM (1) 8-pin RJ45 female, shielded;
        Connects to a V24R-C touch screen via a V-CBL-SC cable[2]
          TO PANEL – G,24 (1) 2-pin 5mm detachable terminal block;
        Connects to a V24R-C touch screen via a V-CBL-SC cable[2]
          PWR IN – 24VDC 3.7A (1) 2.1 x 5.5 mm DC power connector;
        24 Volt DC power input from PW-2435RU power pack[2]
          PWR (1) green LED, indicates DC power supplied from power pack
        Connectors – Rear Panel
          DM (1) 8-pin RJ45 female, shielded,DM 8G+ input;
        Connects to the DM 8G+™ output of a DM® transmitter or switcher via CAT5e or Crestron® DM-CBL-8G cable[1]
          PWR IN – 24,G (1) 2-pin 5mm detachable terminal block;
        24 Volt DC power input from PW-2435DUL power pack[2]
          PWR IN – 24VDC 3.7A (1) 2.1 x 5.5 mm DC power connector;
        24 Volt DC power input from PW-2435RU power pack[2]
          Ground (1) Flying lead, grounding wire
        Power Requirements
          Power Pack 3.7 Amps @ 24 Volts DC;
        100-240 Volt AC, 50/60Hz power pack, model PW-2435RU or PW-2435DUL[2]
        Environmental
          Temperature 32° to 113°F (0° to 45°C)
          Humidity 10% to 90% RH (non-condensing)
        Enclosure
          Construction Metal, black finish, includes (3) metal inserts to allow choice of black, white, or almond front panel
          Flush Wall Mount Mounts in a 1-gang electrical box or in a 1-gang opening in a typical 6 inch deep floor box, 2.5 inch minimum mounting depth required, decorator style faceplate not included
          Surface Mount Surface mount bracket included
          Rack Mount Mountable to a single 19-inch EIA rack rail
        Dimensions
          Height 4.12 in (105 mm)
          Width 1.72 in (44 mm);
        1.93 in (49 mm) w/surface mount bracket
          Depth 1.58 in (40 mm)
        Weight
          5.0 oz (141 g)
        Click here to search product certificates.
        1. For DM 8G+ wiring, use Crestron DM-CBL-8G DigitalMedia 8G Cable or generic CAT5e (or better) UTP or STP. Maximum wire length for DM 8G+ is 330 ft (100 m) between devices. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the DigitalMedia™ Design Guide, Doc. #4546 for complete system deisgn guidelines. All wire and cables sold separately.
        2. Item(s) sold separately or included with touch screen display.

        This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

         

        Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

         

        The specific patents that cover Crestron products are listed online at: patents.crestron.com.

         

        Crestron, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G+, V-Panel, and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. ©2012 Crestron Electronics, Inc.

        Pricing Region Select
        Please select your region below to see the appropriate Advertised Pricing.