The Crestron CGEIB-IP is a control interface by which a Crestron control system can be coupled to a KNX (previously known as EIB) installation using either RS232 or Ethernet (TCP/IP). Also, the Crestron CGEIB-IP filters the desired information out of received KNX/EIB messages and sends them to the Crestron control system via the same interface (RS232 or TCP/IP), which provides the Crestron installation with live updates of the KNX/EIB installation.
The Crestron CGEIB-IP is a control interface by which a Crestron control system
can be coupled to a KNX (previously known as EIB) installation using either RS232
or Ethernet (TCP/IP). Also, the Crestron CGEIB-IP filters the desired information
out of received KNX/EIB messages and sends them to the Crestron control system
via the same interface (RS232 or TCP/IP), which provides the Crestron installation
with live updates of the KNX/EIB installation.
Crestron always provided a valuable solution to interoperate with a KNX/EIB
network by means of the CGEIB: a DIN-rail mountable EIB node that could be
controlled only over RS-232. Crestron has expanded their CGEIB with the
possibility to be controlled over TCP-IP. This CGEIB-IP is a new unit that replaces
the CGEIB, but as it still holds an RS-232 port as well, it is perfectly backwards
compatible. So, for replacing the CGEIB in an existing installation, one can install
this CGEIB-IP.
| Connectors |
| Power |
(1) Wago connector, powers the CGEIB-IP |
| BUS (KNX/EIB) |
(1) Wago connector, connects the CGEIB-IP with the KNX bus |
| RS-232 |
(1) DB9 female, RS232 port |
| LAN |
(1) 8-wire RJ45 with 2 LED indicators; 10/100 BaseT Ethernet port; Green LED indicates link status; Yellow LED indicates Ethernet activity |
| Power Requirements |
| Power Consumption |
1.8 Watts (0.075 Amps @ 24 Volts AC/DC) (power supply not included) |
| Environmental |
| Temperature |
0° to 55°C (32° to 131°F) |
| Humidity |
10% to 93% RH (non-condensing) |
| Enclosure |
| |
Light gray polycarbonate housing, occupies 2 DIN module spaces (36mm) |
| Dimensions |
| Length |
90 mm (3.54 in) |
| Width |
35 mm (1.38 in) |
| Height |
70 mm (2.74 in) |
| Controls & Indicators |
| Power |
(1) Blue |
| Controls & Indicators |
| KNX RX/TX |
(1) Red/Green LED; Red upon KNX data received, Green upon KNX data transmitted |
| IP/RS232 |
(1) Red Led; Red with RS232 Connected, Green with IP connected |
| Programming Button |
Used to set the CGEIB-IP is in ETS programming mode |
| Programming LED |
(1) Red LED; indicates the CGEIB-IP is in ETS programming mode |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.