| Wired Communications |
| |
Ethernet |
10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, IEEE 802.3at Type 1 compliant |
| |
Cresnet |
Cresnet master mode [1] |
| Wireless Communications [1] |
| |
RF Transceiver |
infiNET EX 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant |
| |
Range |
50 ft (15 m) to nearest mesh network device(s), subject to site-specific conditions and individual device capabilities, range between floors or ceilings is limited to one level [3] |
| |
Note: Do not rackmount or stack multiple units when using wireless. Use care when positioning the device to avoid interference from nearby RF devices, obstructions, and metal surfaces. |
| Connectors |
| |
MEMORY |
(1) Micro SD memory card slot;
Accepts one Micro SD card for storage of log files |
| |
COMPUTER |
(1) USB Type Micro-B connector, female;
Service port for factory use only |
| |
NET |
(1) 4-pin 3.5 mm detachable terminal block;
Cresnet master port [1];
Outputs power to Cresnet devices if the included power pack is connected to the 24 VDC power input jack;
Alternately functions as a Cresnet power input to power the unit from a Cresnet power supply [2];
See "Power" section below for additional specifications |
| |
G |
(1) 4-40 screw;
Chassis ground lug |
| |
24 VDC 0.75A |
(1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input (power pack included);
Passes through to the NET port to power Cresnet devices;
See "Power" section below for additional specifications |
| |
LAN PoE |
(1) 8-pin RJ45 connector, female;
10Base-T/100Base-TX Ethernet port;
PoE PD port |
| Controls & Indicators |
| |
PWR |
(1) Green LED, indicates operating power is supplied via PoE, a power pack, or Cresnet |
| |
NET |
(1) Amber LED, indicates communication with Cresnet devices |
| |
PAIR |
(1) Red LED, indicates when pairing with an infiNET EX wireless device |
| |
HW-R |
(1) Pushbutton, initiates hardware reset |
| |
SW-R |
(1) Pushbutton, initiates software reset |
| |
LAN PoE (rear) |
(1) Green and (1) amber LEDs, green indicates Ethernet link status, amber indicates Ethernet activity |
| Power |
| |
Power Source Options |
PoE, power pack, or Cresnet; safe to connect PoE simultaneously with either Cresnet or power pack |
| |
Power over Ethernet |
IEEE 802.3at Type 1 (802.3af compatible) Class 0 (12.95 W) PoE Powered Device |
| |
Power Pack (included) |
Input: 0.4 Amps maximum @ 100-240 Volts AC, 50/60 Hz;
Output: 0.75 Amps @ 24 Volts DC;
Model: PW-2407WU |
| |
Cresnet Power Usage |
4 Watts (0.17 Amp @ 24 Volts DC) when powered by a Cresnet power supply [2] |
| |
Available Cresnet Power |
14 Watts (0.6 Amp @ 24 Volts DC) when powered by the included power pack |
| |
Power Consumption |
4 Watts (not including any connected Cresnet devices) |
| Environmental |
| |
Temperature |
41° to 113° F (5° to 45° C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| |
Heat Dissipation |
14 BTU/hr |
| Construction |
| |
Enclosure |
IFE small form factor, white and blue plastic |
| |
Mounting |
Freestanding, stackable, surface mount, or 35 mm DIN EN 60715 rail mount; occupies 8 DIN module spaces (144 mm); surface/DIN rail mounting bracket included, optional rack mount and pole mount kits sold separately |
| Dimensions |
| |
Height |
1.35 in (35 mm);
1.77 in (45 mm) with bracket |
| |
Width |
5.04 in (129 mm);
5.36 in (137 mm) with bracket |
| |
Depth |
5.04 (129 mm) |
| Weight |
| |
9.9 oz (281 g);
11.3 oz (321 g) with bracket |
| Compliance |
| |
UL Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device |