Master Photo: HD-TXC-101-C-1G-E-W-T: Front with faceplate
Add to Favorites

HD-TXC-101-C-1G-E-W-T

DM Lite® Transmitter for HDMI®, IR and RS-232 Signal Extension over CATx Cable, Wall Plate, White Textured

Discontinued

Pairs with a DM Lite® or DMPS Lite™ receiver to provide a signal extender for HDMI® signals up to UHD and 4K and also for RS-232, and IR signals.

Have a question?
Add to a Project
Find a Dealer

The HD-TXC-101-C-1G-E (-B-T or -W-T) is a DM Lite® wall plate transmitter designed to pair with a DM Lite or DMPS Lite™ receiver to form a signal extender for HDMI®, RS-232, and IR signals. The DM Lite family of products offers a versatile solution for extending HD, UHD, 2K, and 4K video signals, with stereo or surround sound audio, over a single CAT5e (or higher) cable. A cable length of up to 230 ft (70 m) is supported for HD 1080p, WUXGA, and 2K signals, or up to 130 ft (40 m) for UHD and 4K. In addition to video and audio, the HD-TXC-101-C-1G-E supports the extension of RS-232 and IR control signals in either direction.1

For applications requiring a surface-mountable version, refer to the HD-TXC-101-C-E product page.

For applications that do not require IR or RS-232 signal extension, refer to the HD-TX-101-C-1G-E-B-T or HD-TX-101-C-1G-E-W-T product page.

The USB power port supplies power only (500 mA maximum) and is suitable for general use to power USB powered devices. No USB data is passed through this connection. It cannot be used to extend USB data, video, or audio signals.

The HD-TXC-101-C-1G-E series is available in black or white and is designed to mount in a single-gang electrical box or plaster ring (not included). When paired with a surface-mountable receiver, the HD-TXC-101-C-1G-E is powered by the receiver over the DM Lite link cable.2

NOTE: This product is not addressable from a control system and offers no programmable functionality when paired with an HD-RX-201-C-E or DMPS Lite receiver. Otherwise, AV, CEC, IR, and RS-232 signals are simply passed through between a single transmitter and receiver pair. The RJ-45 link port on this product is exclusively intended for linking with a single DM Lite or DMPS Lite receiver. It should not be used to connect to any other equipment or network. DM Lite technology is not compatible with PoE, PoDM, DigitalMedia 8G+®, or HDBaseT® technology.

 
Key Features
  • Pairs with a DM Lite® or DMPS Lite™ receiver
  • Enables extension of HDMI®, RS-232, and IR signals
  • Links to the receiver via a single CAT5e (or higher) twisted pair cable
  • Supports 4K and UHD at up to 130 ft (40 m)
  • Supports HD 1080p, WUXGA, and 2K at up to 230 ft (70 m)
  • Handles 4K video resolutions up to 4K60 4:2:0 and 4K30 4:4:4
  • Handles 3D video and Deep Color
  • Supports Dolby® TrueHD, Dolby Atmos®, DTS HD®, DTS:X®, and uncompressed 7.1 linear PCM audio
  • Compatible with HDMI, DVI, and Dual-Mode DisplayPort™ sources
  • USB power port supplies power to USB powered devices
  • HDCP 2.2 compliant
  • Passes CEC and EDID signals
  • Extends bidirectional RS-232 and IR control signals
  • Flush wall mount design
  • Installs in a single-gang U.S. electrical box (2-1/4” deep) or plaster ring (not included)
  • Decorator style faceplates sold separately
  • Normally powered by the receiver (surface-mountable) over the link cable
  1. For the DM Lite link cable, use Crestron DM-CBL-8G DigitalMedia 8G™ cable, Crestron DM-CBL-ULTRA DigitalMedia™ Ultra cable, or third-party CAT5e (or higher). The maximum cable length is 230 ft (70 m) for resolutions up to 2K or 130 ft (40 m) for higher resolution signals up to 4K. Refer to the “Maximum DM Lite Link Cable Lengths” table for a more detailed overview. Shielded cable and connectors are required when bundling multiple cables in a wire run, and are recommended for all applications to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Wire and cables are sold separately. DM Lite devices are not compatible with DigitalMedia 8G+, HDBaseT, PoE, PoDM, or any other CATx based interface or network.
  2. For applications in which the HD-TXC-101-C-1G-E is paired with a 1-gang receiver (HD-RXC-101-C-1G-E), refer to Online Help Answer ID 1000168. A power pack must not be connected to both the transmitter and receiver simultaneously. DM Lite devices are not compatible with PoE or PoDM.
  3. The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.

This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.

This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

The specific patents that cover Crestron products are listed online at patents.crestron.com.

Certain Crestron products contain open source software. For specific information, visit https://www.crestron.com/opensource.

Crestron, the Crestron logo, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G, DM Lite, and DMPS Lite are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries.  DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDBaseT is either a trademark or registered trademark of HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2020 Crestron Electronics, Inc.

 
4K HDCP 2.2 AVF Works With (2)
Video
Input Signal Type HDMI with Deep Color, 3D, and 4K (DVI and Dual-Mode DisplayPortTM interface compatible3)
Copy Protection HDCP 2.2
Maximum Resolutions
Scan
Type		 Resolution Frame
Rate		 Color
Sampling		 Color
Depth
Progressive 4096x2160 DCI 4K
&
3840x2160 4K UHD		 24 Hz 4:4:4 30 bit
30 Hz 4:4:4 24 bit
30 Hz 4:2:2 36 bit
60 Hz 4:2:0 24 bit
2560x1600 WQXGA 60 Hz 4:4:4 36 bit
1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
Interlaced 1920x1080 HD 1080i 30 Hz 4:4:4 36 bit
NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
Audio
Input Signal Type HDMI (Dual-Mode DisplayPort interface compatible3)
Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS®, DTS ES, DTS 96/24, DTS HD High Res, DTS-HD Master Audio, DTS:X, LPCM up to 8 channels
Communications
HDMI HDCP 2.2, EDID, CEC pass-through
RS-232 2-way serial pass-through up to 115.2k baud (TD/RD only)
IR Bidirectional IR signal pass-through up to 60 kHz
DM Lite Link Proprietary link for connection between one DM Lite transmitter and DM Lite or DMPS Lite receiver only
Connectors
IR IN/OUT (1) 4-pin 3.5 mm detachable terminal block;
Comprises (1) IR input port and (1) IR output port;
IR IN is for connection from a Crestron IR control port or other IR signal source and passes the IR input signal to the IR OUT port on the receiver;
IR OUT is for connection to an IR emitter (IRP2, sold separately) and transmits the IR signal from the IR IN port on the receiver;
Supports IR up to 60 kHz
HDMI IN (1) HDMI Type A connector, female;
HDMI digital video/audio input (DVI and Dual-Mode DisplayPort interface compatible3)
COM (1) 3-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Passes RS-232 TD/RD data to/from the COM port on the receiver;
Supports up to 115.2k baud
POWER ONLY (1) USB Type A connector, female;
USB power port (500 mA maximum output);
Supplies power for a Crestron Multihead HD Video Cable (CBL-MULTI-HD-6, sold separately) or other USB powered device
TO RX (DM Lite, rear) (1) 8-pin RJ-45 connector, female, shielded;
DM Lite link port for connection to a DM Lite or DMPS Lite receiver1
24VDC 1.25A (rear)

(1) 2-pin 3.5 mm detachable terminal block;
24 VDC power input;

NOTE: A power pack is not included with the HD-TXC-101-C-1G-E. When the HD-TXC-101-C-1G-E is paired with a surface-mountable receiver, the 24 VDC power input of the HD-TXC-101-C-1G-E is not used. The power pack included with and connected to the surface-mountable receiver is used to power both the receiver and the HD-TXC-101-C-1G-E.2
Indicators
PWR (1) Green LED, indicates operating power is supplied from the receiver via the DM Lite link or from a power pack via the 24 VDC input
HDMI IN (1) Green LED, indicates HDMI input signal presence
TO RX (DM Lite) (2) LEDs on RJ-45 connector, green LED indicates DM Lite link status, amber LED indicates a valid video signal
Power
Power Pack (sold separately) Input: 100-240 VAC, 50/60 Hz;
Output: 1.25 Amps @ 24 VDC;
Model: TBA
Note: This power pack is required only when the HD-TXC-101-C-1G-E is paired with a wall plate receiver. When the HD-TXC-101-C-1G-E is paired with a surface-mountable receiver, the power pack included with and connected to the receiver is used to power both the receiver and the HD-TXC-101-C-1G-E.2
Environmental
Temperature 32° to 104° F (0° to 40° C)
Humidity 20% to 90% RH (non-condensing)
Heat Dissipation 9.1 BTU/hr
Construction
Composition Metal housing and bracket with black or white polycarbonate front label overlay
Mounting Mounts in a 1-gang (or larger) 2-1/4 inch (57 mm) deep U.S. electrical box or plaster ring (not included)
Faceplate Requires a decorator-style faceplate (FP-G series, sold separately)
Dimensions
Height 4.08 in (104 mm)
Width 1.81 in (46 mm)
Depth 1.97 in (50 mm)
Weight
5.33 oz (151 g)
Compliance
UL® Listed for US and Canada, CE, IC, FCC Part 15 Class B digital device
Regulatory Models HD-TXC-101-C-1G-E-B-T, HD-TXC-101-C-1G-E-W-T
Maximum DM Lite Link Cable Lengths
 
 
Resolution		 Cable Type
CAT5e (or higher),
DM-CBL-ULTRA DM® Ultra Cable, or
DM-CBL-8G DM 8G DM 8G® Cable1
1920x1080 FHD 1080p 230 ft (70 m)
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 DCI 2K
2048x1152 QWXGA
2560x1080 UWFHD 130 ft (40 m)
2560x1440 WQHD
2560x1600 WQXGA
3840x2160 4K UHD
4096x2160 DCI 4K
Click here to search product certificates.
  1. For the DM Lite link cable, use Crestron DM-CBL-8G DigitalMedia 8G™ cable, Crestron DM-CBL-ULTRA DigitalMedia™ Ultra cable, or third-party CAT5e (or higher). The maximum cable length is 230 ft (70 m) for resolutions up to 2K or 130 ft (40 m) for higher resolution signals up to 4K. Refer to the “Maximum DM Lite Link Cable Lengths” table for a more detailed overview. Shielded cable and connectors are required when bundling multiple cables in a wire run, and are recommended for all applications to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Wire and cables are sold separately. DM Lite devices are not compatible with DigitalMedia 8G+, HDBaseT, PoE, PoDM, or any other CATx based interface or network.
  2. For applications in which the HD-TXC-101-C-1G-E is paired with a 1-gang receiver (HD-RXC-101-C-1G-E), refer to Online Help Answer ID 1000168. A power pack must not be connected to both the transmitter and receiver simultaneously. DM Lite devices are not compatible with PoE or PoDM.
  3. The HDMI input requires an appropriate adapter or interface cable to accommodate a DVI or Dual-Mode DisplayPort signal. CBL-HD-DVI interface cables are available separately.

This product may be purchased from select authorized Crestron dealers and distributors. To find a dealer or distributor, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/How-To-Buy/Find-a-Representative or by calling 855-263-8754.

This product is covered under the Crestron standard limited warranty. Refer to www.crestron.com/warranty for full details.

The specific patents that cover Crestron products are listed online at patents.crestron.com.

Certain Crestron products contain open source software. For specific information, visit https://www.crestron.com/opensource.

Crestron, the Crestron logo, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G, DM Lite, and DMPS Lite are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby, Dolby Atmos, and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries.  DTS, DTS HD, and DTS:X are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDBaseT is either a trademark or registered trademark of HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. DisplayPort is either a trademark or registered trademark of Video Electronics Standards Association in the United States and/or other countries. UL is either a trademark or registered trademark of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2020 Crestron Electronics, Inc.

Pricing Region Select
Please select your region below to see the appropriate Advertised Pricing.