This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.
Provides protection of a Crestron RS-232 COM port against lightning surges and other electrical disturbances.
The CSP-RS232I is an accessory designed to protect a Crestron® control system's COM ports from lightning surges and other electrical disturbances brought through the RS-232 control line [1]. By electrically isolating any distant, outdoor device such as a pool & spa controller or irrigation system, the CSP-RS232I can prevent damage to the control system in the event of a near lightning strike, ground-loop, or short from a high voltage line.
Key Features
- Recommended for lengthy or outdoor RS-232 cable runs
- Protects control systems from lightning strikes and electrical disturbances
- Supports RS-232 from 300 to 115.2k baud [1]
- Passes RX, TX, RTS, and CTS signals
- 4.5 Kilovolt RMS galvanic isolation
Protection |
|
Isolation |
4.5 KilovoltsRMS for 1 minute |
Connectors |
|
DEVICE |
(1) DB9 male, isolated bidirectional RS-232 pass-through port [1];
Passes RX, TX, RTS, and CTS signals;
Supports 300 to 115.2k baud |
|
Ground |
(1) 6-32 screw, chassis ground lug |
|
CONTROL SYSTEM |
(1) DB9 female;
Connection to any Crestron COM port[1];
6 ft (1.83 m) interface cable included |
|
PWR 24VDC |
(1) 2-pin 3.5mm detachable terminal block;
24 Volt DC power input;
May be connected to a Cresnet® network or dedicated power supply (not included) |
|
PWR 12VDC |
(1) 2.5mm barrel DC power jack;
12 Volt DC power input;
(PW-1205 or PW-1205RU power pack sold separately) |
Indicators |
|
PWR |
(1) green LED, indicates power supplied via Cresnet network or local power pack |
Power Requirements |
|
Power Pack |
0.5 Amp @ 12 Volts DC;
For use with Crestron model PW-1205 (120V) or PW-1205RU (100-240V) power pack, each sold separately |
|
Cresnet Power Usage |
1 Watt (0.04 Amp @ 24 Volts DC) with no power pack connected |
Environmental |
|
Temperature |
32° to 158°F (0° to 70°C) |
|
Humidity |
10% to 90% RH (non-condensing) |
|
Heat Dissipation |
3 BTU per hour |
Enclosure |
|
Steel, surface mount box with (2) integral mounting flanges, printed label |
Dimensions |
|
Height |
1.34 in (34 mm) |
|
Width |
4.52 in (115 mm) |
|
Depth |
3.76 in (96 mm) |
Weight |
|
9.1 oz (257 g) |
Click
here to search product certificates.
Please select your region below to see the appropriate Advertised Pricing.