Text
  • Text
  • Doc. #
  • Answer ID
Resources
Printer Friendly

INET-IOEX-RYIO

infiNET EX® Wireless Relay/Digital Input Control Module

A compact and low-cost low-voltage relay and digital input control interface that communicates via the infiNET EX® wireless network.



Please note: Compatible with 2-Series and 3-Series® control systems.

Every installer knows — running wires is a challenge and it adds substantial cost to any project. Crestron® infiNET EX® technology offers a wireless solution for controlling many devices in a home or commercial facility, eliminating the need to cut into walls, fish through insulation, or install expensive conduit just to get a wire to each device.

The INET-IOEX-RYIO is a very compact and low-cost wireless device that is perfect for use in retrofits, historic buildings, rental homes and offices, or any budget-conscious application. It provides a low-voltage relay and digital input control interface for remote devices such as garage door openers, sensors, and motorized screens. It includes two isolated relays and two digital input ports, and communicates with a Crestron control system[1] via the infiNET EX wireless network, enabling control and monitoring of the remote equipment without having to run wires through walls and ceilings.[2]

Please note: The INET-IOEX-RYIO is compatible with 2-Series and 3-Series® control systems.

infiNET EX®
Ultra-reliable infiNET EX wireless technology provides steadfast 2-way RF communications throughout a residential or commercial structure without the need for physical control wiring. Employing a 2.4 GHz mesh network topology, each infiNET EX device functions as an expander, passing command signals through to every other infiNET EX device within range (approximately 150 feet or 46 meters indoors), ensuring that every command reaches its intended destination without disruption.[3]

The INET-IOEX-RYIO communicates with a Crestron control system via an infiNET EX Wireless Gateway (model CEN-RFGW-EX, DIN-AP3MEX, or MC3[4]). Up to 100 infiNET EX devices, including Cameo® Wireless Keypads and In-Wall Dimmers and Switches[4], may coexist on a single wireless network, and every device that is added to the network effectively increases the range and stability of the entire network by providing multiple redundant signal paths[3]. Built-in Dynamic Frequency Allocation continuously monitors RF conditions, automatically selecting the clearest channel to prevent interference from neighboring networks, cordless phones, and microwaves.

Surface Mount
The INET-IOEX-RYIO is designed to be mounted to a flat surface, located near the equipment that it is controlling or monitoring. Care should be taken when positioning the device to avoid interference from nearby RF devices, obstructions, and metal surfaces. It is powered by an outlet-mounted universal 100-240 Volt AC power pack (included).

Key Features

  • A low-cost wireless control interface
  • Eliminates the need to run wire or install conduit
  • Provides 2 relay and 2 digital input control ports[2]
  • Communicates via the infiNET EX® wireless network
  • Compatible with Crestron® 2-Series and 3-Series® control systems
  • Ultra-compact, surface mount design

Notes:

  1. The INET-IOEX-RYIO is compatible with 2-Series and 3-Series control systems.
  2. A small amount of delay may be normal when sending or receiving some control commands depending upon the size of the wireless network. Larger networks with many devices tend to exhibit more delay.
  3. Any infiNET EX device that provides expander functionality will effectively extend the range of the wireless network beyond the initial range of the gateway. Battery-powered infiNET EX devices do not provide expander functionality. A dedicated infiNET EX Wireless Expander, model CLW-EXPEX or GLA-EXPEX is also available.
  4. Item(s) sold separately.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

Crestron, the Crestron logo, 3-Series, 3-Series Control System, Cameo, and infiNET EX are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2013 Crestron Electronics, Inc.

Last Updated: Dec 10, 2013

Top

  
All brand names, product names and trademarks are the property of their respective owners. Certain trademarks, registered trademarks, and trade names may be used to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.

©2014 Crestron Electronics, Inc.