DigitalMedia Presentation System 200
The DMPS-200-C is a complete presentation control and signal routing solution for boardrooms and classrooms. Integrating the control system, multimedia matrix switcher, mic mixer, audio DSP, amplifier, and DigitalMedia distribution center all into a single 3-space rackmount package, the DMPS-200-C affords flexible signal routing and high-performance signal processing without the need for separate components.
The DMPS-200-C from Crestron® is a complete, high-definition presentation control and signal routing solution for classrooms, boardrooms, lecture halls, and videoconference rooms. Integrating the control system, multimedia matrix switcher, mic mixer, audio DSP, and amplifier all into one 3-space rack mount package, the DMPS-200-C affords flexible signal routing and high-performance signal processing without the need for separate components. Auto-configuring inputs enable plug-and-play compatibility with a wide range of digital and analog sources. Built-in DigitalMedia and HDBaseT® connectivity affords a streamlined wiring solution for interfacing with remote AV sources, computers, and display devices.
HD System Switcher
The DMPS-200-C provides high-performance routing of numerous digital and analog sources to two separate projectors, flat panel displays, codecs, touch screens, and other devices. Connectivity is provided for up to five HDMI® sources, or other combinations of HDMI, RGB, SPDIF, analog audio, and analog video sources (plus additional remote sources via DM 8G+ or HDBaseT). Input auto-detection and auto-switching eliminates the need to configure the inputs - simply connect your source and the DMPS-200-C selects the right audio and video combination. Built-in matrix switching allows routing of six different sources to two separate digital AV devices and three analog audio components.
Flexible Audio Routing
The HDMI, SPDIF, and analog audio inputs may be configured to follow their associated video inputs, or switched independently. In fact, the audio from any HDMI source can be extracted from the digital stream and converted to analog to feed an outboard processor, mixer, or codec, with the return signal feeding back through any analog input, which can be embedded with any video source to form a new HDMI output. Routing of multi-channel PCM, Dolby®, and DTS® audio sources is supported through the HDMI and DM 8G+ outputs. The HDMI, SPDIF, and analog audio inputs include adjustable input compensation to accommodate a wide range of signals and maintain consistent volume levels when switching between sources.
Integrated DM 8G+ input and output affords the ultimate in simplicity, providing a true one-wire interface for remote source and display devices. Easily add a DM 8G+ transmitter to provide connectivity for an HD AV source or computer at a table or lectern. Connect a DM 8G+ receiver to provide signal routing and control for a projector or flat panel display. Supporting wire lengths up to 330 feet (100 meters), DM 8G+ can also provide an ideal interface to a central DigitalMedia switcher as part of a larger multi-room or room-combining system.
DM 8G+ requires just one CAT5e wire run to each location, transporting high-definition video, audio, and Ethernet for each device without compromise. Power over DM (PoDM) is supplied over the same CAT5e connection, providing a centralized power source for all compatible transmitters and receivers. [2,3]
Crestron DigitalMedia 8G+ technology is designed using HDBaseT Alliance specifications, ensuring interoperability with third-party HDBaseT products. Via DM 8G+, the DMPS-200-C can be connected directly to any HDBaseT compliant source or display device without requiring a DM® transmitter or receiver. The DMPS-200-C supports 5Play, the feature set of HDBaseT that converges uncompressed full HD digital video, audio, Ethernet, power and control signals through a single CAT5e or CAT6 cable over distances up to 330 ft (100m).
4-Channel Microphone Mixer
For a complete presentation or conferencing solution, the DMPS-200-C includes built-in mixing and processing for four microphones. Each mic input provides selectable mic or line level with 60 dB of gain adjustment, switchable 48V phantom power, fully-adjustable gating, compression, limiting, and 4-band EQ. Sophisticated matrix mixing allows for a completely different stereo mix of all 4 microphones at each of the DMPS-200-C's five outputs.
Professional Audio DSP
Each analog audio output on the DMPS-200-C includes its own digital signal processor, allowing each output to be optimized to feed a power amplifier, codec, recorder, or assistive listening system. In addition to real-time adjustable volume, bass, treble, and mute controls, each DSP provides 10-band graphic equalization, 2-band parametric equalization, and 85 ms speaker delay adjustment. Hardware relay muting on each output helps prevent "thumping" on power up.
Its built-in 40-watt amplifier allows the DMPS-200-C to directly drive a pair of stereo speakers, or a string of 70 or 100 Volt ceiling speakers. Fed by the main "Program" output, the internal amplifier benefits fully from the onboard DSP. For larger applications, Crestron AMP-Series power amplifiers may be added, providing a complete solution for driving separate program and speech speakers, or any multi-zone loudspeaker system.
EDID Format Management
The DMPS-200-C allows for management of the EDID (Extended Display Identification Data) information that passes between the display devices and input sources in the system. Using Crestron Toolbox software, the format and resolution capabilities of each device can be assessed, allowing the installer to configure EDID signals appropriately for the most desirable and predictable behavior.
A Scaler for Every Display
Through a distributed scaler approach, the DMPS-200-C affords a very flexible and user-friendly solution for handling multiple disparate display devices. Employing discrete outboard scalers like the HD-SCALER and DM-RMC-SCALER-C, the DMPS-200-C allows an independent high-performance scaler to be installed at every display device, ensuring an optimal image on every screen no matter what sources are selected.
QuickSwitch HD® Technology
Handling high-definition digital media means handling HDCP (High-bandwidth Digital Content Protection), the encryption scheme used by content providers to protect their DVDs, Blu-ray discs, and broadcast signals against unauthorized copying. Viewing HDCP encrypted content requires a source device to "authenticate" each display and signal processor in the system and issue it a "key" before delivering an output signal.
Using a conventional HDMI or DVI switcher, it is common to experience a complete loss of signal for up to 15 seconds during the authentication process each time a new source or display is selected anywhere in the system. Also, every source device has a limited number of keys available, so connect too many displays and the source will simply stop outputting a signal without warning.
Crestron QuickSwitch HD manages the keys for every HDCP-compliant device in the system, maintaining continuous authentication for each device to ensure fast, reliable routing of any source to any number of display devices.
Crestron Auto-Locking Technology enables super fast signal switching by instantaneously configuring every device in the signal path, including DM transmitters, DM receivers, and scalers, as soon as the signal hits the first device. Whether switching between sources or TV channels, Auto-Locking significantly reduces the time it takes each device to sense the new signal and configure itself to handle the changes, virtually eliminating any noticeable gap while switching.
Built-in Ethernet Switch
In addition to transporting digital video and audio, the DigitalMedia 8G+ ports on the DMPS-200-C can also extend Ethernet out to one display and one source device, providing high-speed connectivity for each room device that requires a LAN connection. Ethernet is also utilized internally by the Crestron control bus to manage each transmitter and receiver and provide device control.
Private Network Mode
To streamline its implementation on a corporate or university LAN, the DMPS-200-C employs Private Network Mode to provide a single-point connection for the complete system. Using Private Network Mode, the DMPS-200-C requires just one IP address for the complete DM network, plus one additional IP address for the built-in control processor.
Integrated Control System
Its built-in 2-Series control system enables the DMPS-200-C to provide complete, customizable control of every AV device, as well as room lighting, window shades, and projection screens, without requiring a separate control processor. The DMPS-200-C supports the full line of Crestron touch screens, keypads, and wireless remotes for a user experience custom tailored to the specific requirements of each end-user. Support for Crestron control apps and Crestron Fusion® Enterprise Management Software delivers the industry's most powerful platform for remotely controlling and managing multiple rooms using computers and mobile devices.
CEC Embedded Device Control
The primary objective of every Crestron system is to enable precisely the control desired for a seamless user experience. In addition to conventional IR, RS-232, and Ethernet device control, the DMPS-200-C can provide an additional alternative by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. The DMPS-200-C provides a gateway for controlling many devices right through their HDMI (or HDBaseT) connections, potentially eliminating the need for any dedicated control wires or IR emitters. Through proper CEC signal management, the DMPS-200-C allows you to take control of each device as you like.
Every step of the DMPS-200-C setup process is designed to be quick and easy using its front panel or Crestron Toolbox software, configuring inputs and outputs automatically while letting the installer make intelligent design decisions along the way. Out of the box, the DMPS-200-C front panel supports basic signal routing for easy testing and troubleshooting during installation. The front panel label strips can be customized using Crestron Engraver software or standard 3/8" tape labels, allowing for the clear designation of each input and output. Inputs and outputs may also be designated by name through the software to appear on the LCD display.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Crestron, the Crestron logo, AirMedia, Auto-Locking, Cresnet, Crestron Control, Crestron Fusion, Crestron Mobile Pro, Crestron Toolbox, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G+, Fusion EM, Fusion RV, QuickSwitch HD, RoomView, and Smart Graphics are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Apple, iPad, and iPhone are either trademarks or registered trademarks of Apple Inc. in the United States and/or other countries. IOS is either a trademark or registered trademark of Cisco Technology, Inc. in the United States and/or other countries. Dolby and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS is either a trademark or registered trademark of DTS, Inc. in the United States and/or other countries. Android is either a trademark or registered trademark of Google Inc. in the United States and/or other countries. HDBaseT, 5Play, and the HDBaseT Alliance logo are either trademarks or registered trademarks of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Samsung Smart TV is either a trademark or registered trademark of Samsung Electronics Co., Ltd. In the United Stated and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2014 Crestron Electronics, Inc.
Last Updated: Mar 30, 2014