Wall Plate DigitalMedia CAT Transmitter
A low-cost DM CAT transmitter with single HDMI input. Mounts in a single-gang electrical box.
Faceplates not included.
The DM-TX1-1G is a DM® CAT transmitter that installs in a single-gang electrical box to provide a convenient interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia system. The DM-TX1-1G is ideal for wall, lectern, and floor box applications in a boardroom, classroom, auditorium, or residence. It provides a single HDMI® input and connects to the head end using a single Crestron DM cable. Standard gang-box mounting allows for installation adjacent to an Ethernet jack (Crestron MP-WP183 or equivalent) for a total connectivity solution.
Note: the DM-TX1-1G has a reduced feature set relative to other DM transmitters. It must be connected directly to a DM-MD series switcher and does not support the use of repeaters. Please refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for a full overview of the complete DM product line.
As the leader in HDMI and control system technologies, Crestron developed DigitalMedia (DM) to deliver the first complete HD AV distribution system to take HDMI to a higher level. DigitalMedia allows virtually any mix of HDMI and other AV sources to be distributed throughout a home, office, school, or virtually any other facility. The DM-TX1-1G distributes uncompressed digital video and audio signals up to 175 feet (53 m) using Crestron DM cable.
Multimedia Computer/AV Interface
Via its HDMI input, the DM-TX1-1G handles HD 1080p60 video and WUXGA computer signals with HDCP, 3D, and multi-channel HD lossless audio. It can also handle DVI and DisplayPort Multimode signals using an appropriate adapter or interface cable.
A single DM CAT output is provided for connection to a DM switcher. As part of a complete DM system, multiple DM-TX1-1Gs may be installed to enable the distribution of several sources at different locations to feed multiple displays throughout any room or larger facility.
Simple Wall Box Mounting
The DM-TX1-1G is designed to be installed using a 1-gang electrical box or plaster ring, or attached to a single rack rail in the back of an equipment cabinet. It also fits a 1-gang opening in a typical 6" deep floor box. The DM cable is terminated to the rear of the transmitter using screw terminals. The unit is powered via the DMNet® connection.
Please refer to the DigitalMedia Resources Webpage at http://www.crestron.com/dmresources/ for additional design tools and reference documents.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.
Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Crestron, DigitalMedia, DM, DMNet, and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. ©2012 Crestron Electronics, Inc.
Last Updated: Feb 27, 2013