Text
  • Text
  • Doc. #
  • Answer ID
Resources
Printer Friendly

DM-RMC-100-F

DigitalMedia™ Fiber Receiver & Room Controller 100

Provides a controller and interface for a high-definition display device as part of a complete DigitalMedia™ System. Connects to the DM® Fiber output of a DM Switcher or Transmitter via CresFiber®. Includes a USB HID device port for connecting a mouse/keyboard to control a computer or other equipment at a different location. Also includes IR, RS-232, and Ethernet control ports.



Click Here for Cable Length Reference

The DM-RMC-100-F provides a convenient one-box interface solution for a single display device as part of a complete Crestron® DigitalMedia™ system. It functions as a DM® Fiber receiver and control interface, providing a single HDMI® output along with Ethernet, USB HID, and a variety of control ports. Its compact, low-profile design allows the DM-RMC-100-F to be installed discreetly behind a flat panel display or above a ceiling mounted projector. It connects to the head end or source location using multimode fiber optic cable.[1]

DigitalMedia™ Fiber
As the leader in HDMI and control system technologies, Crestron developed DigitalMedia (DM) to deliver the first complete HD AV distribution system to take HDMI to a higher level. DigitalMedia allows virtually any mix of HDMI and other AV sources to be distributed throughout a home, office, school, or virtually any other facility. DigitalMedia Fiber distributes uncompressed digital video and audio signals up to 1000 feet (300 m) using multimode fiber optic cable[1].

Multimedia Display Interface
A single HDMI digital AV output port is provided on the DM-RMC-100-F, supporting HD 1080p60 video and WUXGA computer signals with HDCP, Deep Color, 3D, and multi-channel HD lossless audio — all through one connection. The HDMI output can also handle DVI signals using an appropriate adapter or interface cable[2].

Two fiber strands connect the DM-RMC-100-F to a DM switcher or transmitter, transporting video, audio, control, and networking signals all through a pair of SC type optical connections.[1] Multiple DM-RMC-100-Fs may be installed to handle each display in a multiroom distribution system, all fed from a central DM-MD series switcher. Or, a single DM-RMC-100-F can be fed straight from a DM Fiber transmitter. affording a simple solution for extending a computer or AV signal to a single display.

LAN Connectivity
Along with high-definition AV and control, DigitalMedia also integrates high-speed Ethernet networking for a total signal distribution solution. The DM-RMC-100-F includes a 10/100 Ethernet port, providing a convenient LAN connection for a local network device.

Keyboard/Mouse Extender
The DM-RMC-100-F also functions as a keyboard/mouse extender, allowing a USB HID-compliant keyboard and/or mouse to be connected at the display location and used to control a computer or other component located at the central equipment rack or some other remote location.

Embedded Device Control
The primary objective of every Crestron system is to enable precisely the control desired for a seamless user experience. The DM-RMC-100-F includes built-in RS-232, IR, and Ethernet control ports to allow programmable control of the display device connected to it. But, it can also provide an alternative to such conventional control methods by harnessing the CEC (Consumer Electronics Control) signal embedded in HDMI. Through its connection to the control system, the DM-RMC-100-F provides a gateway for controlling the display device right through the HDMI connection, potentially eliminating the need for any dedicated control wires or IR emitters.

Two low-voltage relay ports are also included on the DM-RMC-100-F for control of a projection screen or lift. In addition, a single digital input port is provided to accommodate a power sensor or contact closure for enhanced automation and monitoring.

Low-Profile Installation
The DM-RMC-100-F mounts to a wall, ceiling, or other flat surface. At less than 1-1/2 inches (33 mm) deep, it fits easily behind a flat panel display or above a ceiling-mounted projector. Connections are positioned on the top and bottom of the unit. An array of indicators is provided on the front panel for easy setup and troubleshooting.

Please refer to the DigitalMedia Resources Webpage at http://www.crestron.com/dmresources/ for additional design tools and reference documents.

Key Features

  • DigitalMedia™ Fiber receiver and display controller
  • DM® Fiber input supports up to 1000 ft (300 m) cable length[1]
  • Provides one HDMI® or DVI display output[2]
  • Handles HD video with Deep Color, 3D, and HDCP
  • Handles Dolby® TrueHD, DTS-HD Master Audio™, and uncompressed 7.1 linear PCM audio
  • Provides 10/100 Ethernet and USB HID mouse/keyboard ports
  • Enables device control via CEC, IR, RS-232, and Ethernet
  • Provides two relay control ports and one contact sensing input
  • Allows quick, easy setup and diagnostics
  • Low-profile surface mount design
  • Universal power pack included

Notes:

  1. The maximum DigitalMedia Fiber cable length is 1000 ft (300 m) using CRESFIBER, CRESFIBER8G, CRESFIBER-DUAL-SC, or generic OM2/OM3 duplex multimode fiber optic cable. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. All cable sold separately.
  2. HDMI requires an appropriate adapter or interface cable to accommodate a DVI signal. CBL-HD-DVI interface cable available separately.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

CresFiber, Crestron, DigitalMedia, DM, and the Crestron logo are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Dolby and Dolby Digital are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS and DTS-HD Master Audio are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. ©2012 Crestron Electronics, Inc.

Last Updated: Aug 7, 2012

Top

  
All brand names, product names and trademarks are the property of their respective owners. Certain trademarks, registered trademarks, and trade names may be used to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography.

©2014 Crestron Electronics, Inc.