iLux® Universal Dimmer Expansion Module
The CLS-EXP-DIMU enables the expansion of Crestron iLux® Integrated Lighting System (CLS-C6 series) and other Crestron® lighting dimmers to allow dimming of both forward and reverse phase type loads. Supported loads include LED, electronic low-voltage, magnetic low-voltage, incandescent, neon/cold cathode, or 2-wire dimmable fluorescent. A single model supports 120, 230, or 277 Volt loads up to 16 Amps.
The CLS-EXP-DIMU simplifies installation by auto-detecting the dimmable load type connected to it and selecting the appropriate operating mode to control that load. Reverse phase (trailing edge) mode supports incandescent and electronic low-voltage load types, while forward phase (leading edge) mode handles magnetic low-voltage, neon, and other inductive load types.
Any output channel of the iLux system can be used to control the CLS-EXP-DIMU to dim a fully loaded circuit. It is also compatible with CLW-Series in-wall dimmers and select CLX-Series lighting control modules. The metal enclosure is designed for mounting to a vertical surface, and can be installed in an environmental air-handling space above a suspended ceiling. Conduit knockouts are provided on the bottom and lower sides. All connections are made via screw terminals behind the front cover.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Crestron, the Crestron logo, and iLux are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Mark 10 Powerline is either a trademark or registered trademark of Koninklijke Philips Electronics N.V in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2014 Crestron Electronics, Inc.
Last Updated: Mar 27, 2014