Provides a very simple and cost-effective solution for distributing multiple high-definition AV sources to up to four rooms as part of a complete Crestron® system.
DigitalMedia isn't just for large, expensive homes and facilities. The DM-MD6X4 DigitalMedia Distribution Center provides a very simple and cost-effective solution for distributing multiple high-definition sources to up to four rooms as part of a complete Crestron® system. Featuring DigitalMedia 8G+™ and HDBaseT™ technology, the DM-MD6X4 delivers ultra-reliable, ultra high-bandwidth signal routing over inexpensive CAT5e wiring[1]. Everything about the DM-MD6X4 is engineered to deliver a transparent user experience and the highest performance.
HD Matrix Switcher
The DM-MD6X4 provides six HDMI® inputs to handle HDTV receivers, DVD or Blu-ray Disc® players, media servers, computers, and other HD digital sources. Outputs include one HDMI and three DigitalMedia ports, furnishing simple one-wire connectivity for a local display or audio processor, and three additional displays anywhere in the house. QuickSwitch HD® matrix switching allows any display to view any source at any time.
DigitalMedia 8G+™
Crestron exclusive DM 8G+™ technology affords the ultimate in simplicity, providing a true one-wire interface for distributing high-definition video, audio, and control signals to multiple displays throughout a residence or commercial structure. Simply connect a DM 8G+ receiver[2] at each flat-panel display or projector for a complete AV and control interface. Just one CAT5e wire run to each receiver transports pure, uncompressed HD video, 7.1 surround sound audio, 10/100 Ethernet, and control signals for a fully integrated media system with minimal wiring. DM 8G+ allows for wire runs up to 330 feet (100 meters) using CAT5e or Crestron DigitalMedia 8G™ Cable.[1]
HDBaseT™
Crestron DigitalMedia 8G+ technology is designed using HDBaseT Alliance specifications, ensuring interoperability with third-party HDBaseT products. Via its DM 8G+ outputs, the DM-MD6X4 can be connected directly to HDBaseT compliant display devices without requiring any DM receivers. The DM-MD6X4 supports 5Play™, the feature set of HDBaseT that converges uncompressed full HD digital video, audio, Ethernet, power[3] and control signals through a single CAT5e or CAT6 cable over distances up to 328 ft (100m).
QuickSwitch HD®
Handling high-definition digital media means handling HDCP (High-bandwidth Digital Content Protection), the encryption scheme that content providers use to protect their DVDs, Blu-ray Discs, and broadcast signals against unauthorized copying. Viewing HDCP encrypted content requires the source device to "authenticate" each display in the system and issue it a "key" before the content can be viewed. Ordinarily this causes a complete loss of signal for up to 15 seconds each time a new source or display is selected anywhere in the system. To make matters worse, every source device has a limited number of keys available, so connect too many displays and the source will simply stop outputting a signal without warning.
Not to worry — Crestron QuickSwitch HD manages the keys for every HDCP-compliant device in the system, maintaining continuous authentication for each device to ensure fast, reliable routing of any source to any number of display devices.
EDID Format Management
With all of today's varied AV sources comes an excess of confusing video and audio formats to keep track of, and chances are not every device in your system supports all of the same formats. Such conflicts can wreak havoc any time you route one source to more than one display or audio component. The Blu-ray player that's feeding your 1080p projector in the theater may restrict itself to a lower resolution, or even shut off completely, if someone decides to view the same signal on the 20" TV in the kitchen. And, instead of enjoying your theater's incredible 7.1 surround sound, you may find yourself limited to 5.1 or even plain old stereo.
The DM-MD6X4 eliminates such conflicts by managing the EDID (Extended Display Identification Data) that modern digital devices use to communicate their capabilities. Through the DM-MD6X4, the format and resolution capabilities of each device can be assessed, allowing the installer to configure EDID signals appropriately for the most desirable and predictable behavior.
A Scaler for Every Display
Scaling capability can be added to the DM-MD6X4 using select DM 8G+ receivers with built in high-definition scalers.[2,3] By placing an independent high-performance scaler at every display device, DigitalMedia truly delivers the most flexible and user-friendly solution for routing multiple disparate sources to many different display devices. This "Distributed Scaler Approach" ensures an optimal image on every screen no matter what sources are selected. Distributed scaling allows a high-res computer source to be viewed on any display in the building. It also allows a high-definition 3D source to be viewed on lower-resolution 2D displays without compromising the original signal, letting you share your theater's full HD 1080p 3D image with smaller, lesser displays in other rooms.
Multi-Channel HD Audio Routing
HDMI is the key to handling all the latest 7.1 surround sound formats like Dolby® TrueHD and DTS-HD Master Audio™. The DM-MD6X4 supports high-performance routing of all surround sound encoded media, as well as uncompressed multi-channel linear PCM, to every display and AV receiver.
Built-in Ethernet Switch
In addition to transporting digital video and audio, DigitalMedia can also extend high-speed Ethernet to display devices that require a LAN connection. Ethernet is also utilized internally by the Crestron control bus to manage all of the DM devices in the system and provide display control in each room. Through its 10/100 Ethernet port, the DM-MD6X4 provides a single-point connection to a home network or corporate LAN, requiring just one IP address for the complete DM system.
USB HID Extender
With built-in USB HID (USB Human Interface Device) signal routing, the DM-MD6X4 lets you control a centralized computer or media server using a mouse or keyboard in another room. The mouse/keyboard can be connected to any DM 8G+ receiver that includes a USB HID port, while the host computer is connected to the USB HID port on the DM-MD6X4 rear panel.
Easy Setup
Every step of the DM-MD6X4 setup is designed to be quick and easy using its front panel or Crestron Toolbox™ software, configuring inputs and outputs automatically while letting the installer make intelligent design decisions along the way. Out of the box, the DM-MD6X4 front panel supports basic signal routing for testing and troubleshooting during installation. The front panel label strips can be customized using Crestron Engraver software or standard 3/8" tape labels, allowing for the clear designation of each input and output. Inputs and outputs may also be designated by name through the software to appear on the LCD display.
Provides a low-cost, high-performance multiroom HD AV signal routing solution
Distributes uncompressed digital video and audio over CAT5e twisted-pair wire[1]
Affords a true one-wire solution using DigitalMedia 8G+™ technology
Supports HDBaseT™ Alliance specifications
Features independently-switchable DM 8G+™ or HDBaseT outputs for 3 remote displays
Allows up to 330 ft (100 m) wire distance to each display
Includes one HDMI® output for a local display or audio processor
Provides inputs for 6 HDMI, DVI, or DisplayPort Multimode sources[4]
Supports Deep Color, 3D, and 7.1 channel HD lossless audio
Supports video resolutions up to WUXGA 1920x1200 and HD 1080p60
QuickSwitch HD® technology manages HDCP keys for reliable, low-latency switching
Performs automatic AV signal format management via EDID
Allows independent scaling for every display through select DM receivers[2,3]
Enables USB HID mouse and keyboard signal extension
Includes integrated Ethernet switch
Provides Power over DM® for PoDM compatible receivers
Provides easy setup and diagnostics tools via front panel or software
Includes built-in universal power supply
Allows native Crestron® system integration via Ethernet
Standard component width or 2-space rack-mountable
Notes:
For DM 8G+ wiring, use Crestron DM-CBL-8G DigitalMedia 8G Cable, Crestron DM-CBL DigitalMedia Cable, Crestron DM-CBL-D DigitalMedia D Cable, or generic CAT5e (or better) UTP or STP. Maximum wire length for DM 8G+ is 330 ft (100 m) between devices. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is also compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables sold separately.
HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort Multimode signal. CBL-HD-DVI interface cables available separately.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.
Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Crestron was honored with three 2013 Electronic House Products of the Year Awards. EH Products of the Year Awards recognize the best technology, products and services for the electronic connected home. Electronic House is one of the most prestigious trade publications in the custom electronics industry.
6x4 digital matrix switch, Crestron QuickSwitch HD®
Input Signal Types
HDMI®, DVI[4], DisplayPort Multimode[4]
Output Signal Types
HDMI, DVI[4], DM 8G+™ (DigitalMedia™ over one CAT5e twisted-pair copper wire)[1], HDBaseT™
Formats
HDMI w/Deep Color & 3D, DVI, HDCP content protection support, HD up to 1080p60, computer up to UXGA/WUXGA, NTSC or PAL
Input Resolutions, Progressive
640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock
Input Resolutions, Interlaced
720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock
Output Resolutions
Matched to inputs
Audio
Switcher
6x4 digital matrix switch, audio-follow-video
Input Signal Types
HDMI, DisplayPort Multimode[4]
Output Signal Types
HDMI, DM 8G+, HDBaseT
Formats
Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD® High Res, DTS-HD Master Audio™, Up to 8ch PCM
Communications
DigitalMedia
DM 8G+, HDCP management, EDID format management, PoDM, HDBaseT compliant
Ethernet
10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP; for control and console
USB
Signal extension/routing for USB HID class devices, USB service port for computer console
Ethernet Switch
5-port switch with Private Network Mode; provides (1) rear panel 10Base-T/100Base-TX Ethernet port and (4) internal 10Base-T/100Base-TX Ethernet ports for the switcher and DM ports
Connectors
HDMI INPUT 1 – 6
(6) 19-pin Type A HDMI female, digital video/audio inputs;
Signal Types: HDMI, DVI, or DisplayPort Multimode[4]
HDMI OUTPUT 1
(1) 19-pin Type A HDMI female, digital video/audio output;
Signal Types: HDMI, DVI[4]
DM OUTPUT 2 – 4
(3) 8-pin RJ45 female, shielded;
DM 8G+ outputs, HDBaseT compliant;
PoDM and PoH PSE (Power Sourcing Equipment) ports;
Connect to DM 8G+ inputs of DM receivers/room controllers or other DM devices, or to HDBaseT devices, via CAT5e or Crestron DM-CBL-8G cable[1]
USB HID
(1) USB Type B female;
USB device port for connection to the USB host interface of a computer or other USB HID-compliant host
LAN
(1) 8-wire RJ45 female, shielded;
10Base-T/100Base-TX Ethernet port
100-240V~2.0A MAX 50/60Hz
(1) IEC C14 male chassis plug, main power input;
Mates with removable power cord, included
G
(1) 6-32 screw, chassis ground lug
COMPUTER (front)
(1) USB Type B female;
USB computer console port
LCD Display
Display Type
16-bit TFT active matrix color LCD
Size
2 inch (52 mm) diagonal
Resolution
220 x 176 pixels
Functions
Displays setup menus, EDID and HDCP details for source and destination devices, audio/video signal information, and other details; allows custom naming of inputs and outputs
Controls & Indicators
HW-R
(1) recessed miniature pushbutton for hardware reset
Nav Pad
(1) 5-way navigation pad for menu navigation and parameter adjustment
HOME
(1) pushbutton, returns to the home menu
BACK
(1) pushbutton, steps menu back one level
INPUT 1 – 6
(6) pushbuttons and green LEDs, select input for routing
OUTPUT 1 – 4
(4) pushbuttons and green LEDs, select output destination(s)
LAN (rear)
(2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
Power Requirements
Main Power
2 Amps @ 100-240 Volts AC, 50/60 Hz
Power over DM (PoDM)
PoDM PSE (Power Sourcing Equipment), supplies power to PoDM Powered Devices
Power over HDBaseT (PoH)
PoH PSE (Power Sourcing Equipment), supplies power to PoH Powered Devices
Environmental
Temperature
32° to 104°F (0° to 40°C)
Humidity
10% to 90% RH (non-condensing)
Heat Dissipation
310 BTU/hr
Enclosure
Chassis
Metal with matte black finish, vented sides, fan-cooled
Faceplate
Metal, matte black finish with polycarbonate label overlay
Mounting
Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included)
Dimensions
Height
3.47 in (89 mm) without feet
Width
17.03 in (433 mm), 19.00 in (483 mm) with ears
Depth
13.38 in (340 mm)
Weight
12.0 lb (5.5 kg)
Notes:
For DM 8G+ wiring, use Crestron DM-CBL-8G DigitalMedia 8G Cable, Crestron DM-CBL DigitalMedia Cable, Crestron DM-CBL-D DigitalMedia D Cable, or generic CAT5e (or better) UTP or STP. Maximum wire length for DM 8G+ is 330 ft (100 m) between devices. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. DM 8G+ is also compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment. All wire and cables sold separately.
HDMI requires an appropriate adapter or interface cable to accommodate a DVI or DisplayPort Multimode signal. CBL-HD-DVI interface cables available separately.
This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.
Specifications subject to change without notice. Crestron is not responsible for errors in typography or photography.
The specific patents that cover Crestron products are listed online at: patents.crestron.com.
Printed from URL:
http://www.crestron.com/resources/product_and_programming_resources/catalogs_and _brochures/online_catalog/default.asp?jump=1&model=DM-MD6X4
