Master photo:SRD-SPL-4
Add to Favorites

SRD-SPL-4

Four-way Amplified Splitter for Satellite Radio Antenna Distribution

Discontinued

This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

  • 4-way amplified satellite radio antenna splitter
  • Splits antenna signal to feed up to 4 tuners
  • Provides 8dB of gain for proper signal distribution
Have a question?
Add to a Project
Find a Dealer

The SRD-SPL-4 is a high quality amplified splitter optimized to split a single antenna signal to feed up to 4 satellite radio tuners as part of a Crestron® XM or SIRIUS® satellite radio distribution network. Its built-in line amplifier is rated to provide 8 dB (minimum) of gain in the satellite radio band (2320-2345 MHz), and is powered from the DC bias voltage (4.5 VDC to 6.5 VDC) provided by the antenna connections on any of the satellite radio tuners downstream. It is also designed to pass DC voltage to provide power to the antenna and other line amplifiers installed upstream.

Accessories furnished with the SRD-SPL-4 include (4) 3 ft F(female)-to-SMB(male) adapter cables, (4) F(male)-to-F(male) couplers, and (1) SMB(female)-to-F(male) adapter. Standard RG-6 cable with male F-connectors (not supplied) may be used to extend the output cable length up to 70 feet from each individual output to each satellite radio tuner. Adding a SRD-AMP-1 line amplifier (sold separately) at the input of the splitter will enable longer output cable lengths of up to 200 feet each.

Note: Unused outputs do not have to be terminated for proper operation.

A 20dB power passing attenuator is also included for use in preventing overload of the splitter input in any installation that is located near a high power satellite radio terrestrial repeater.

 
Key Features
  • 4-way amplified satellite radio antenna splitter
  • Splits antenna signal to feed up to 4 tuners
  • Provides 8dB of gain for proper signal distribution
  • Allows 70 ft cable length per output without additional amplification
  • Uses standard RG-6 coaxial cable
  • Gets power over coax from the satellite radio tuner
  • Passes DC power to the antenna
  • Suitable for indoor or outdoor installation
  • Complete kit includes 3 ft F-to-SMB adapter cables and input attenuator
 
RF
  Bandwidth 2320 to 2345 MHz
  Gain 8 dB (minimum) at 2.335 GHz
  Noise 3 dB maximum
Connectors
  IN (1) F-type coaxial, female;
Maximum Input Level: -10 dBm (with supplied 20 db attenuator)
  OUT (x4) (4) F-type coaxial, female;
Diode protected
Power Requirements
  DC Voltage Range 4.5 to 6.5 Volts DC nominal
  Current Consumption 40 to 100 mA
  Power Passing Passes DC power upstream
  DC Voltage Drop 0.5 Volts DC (typical) outputs to input
  Power supplied by satellite radio tuner
Environmental
  Temperature -40° to 150°F (-40° to 66°C)
  Humidity 0% to 98% RH (non-condensing)
Dimensions
  Height 0.88 in (2.24 cm)
  Width 3.75 in (9.53 cm)
  Depth 2.82 in (7.17 cm)
Click here to search product certificates.
Pricing Region Select
Please select your region below to see the appropriate Advertised Pricing.