Master photo:CEN-TIA
Add to Favorites

CEN-TIA

Telephone Interface and Audio Signal Generator Module

Discontinued

This product has been discontinued. Please contact Crestron True Blue Support at 1-888-CRESTRON for a replacement solution or more information.

Provides a POTS telephone interface to enable speakerphone and paging capabilities. Also enables Caller ID and DTMF control, and provides an audio signal generator using WAV files for custom doorbell, phone ringer, and other applications.

Have a question?
Add to a Project
Find a Dealer

The CEN-TIA provides a telephone audio and DTMF control interface with audio signal generation capabilities and other useful features for home automation, multiroom audio distribution, and other control system applications.

Speakerphone

The CEN-TIA connects directly to a POTS phone line, or to your phone system’s analog extension port, to provide a single-line, half-duplex, push-to-talk speakerphone interface for legacy Crestron® touch screens with built-in microphones, speakers, and analog audio I/O connections. Integrated with the C2N-IADS30X24 Intercom Distribution Switcher, the CEN-TIA can enable speakerphone capabilities for multiple touch screens throughout the house.

Caller ID

See who's calling before you answer by displaying Caller ID information on every touch screen. Manage missed calls easily with complete caller information and management options displayed on the touch screen.

Telephone Paging

The CEN-TIA adds telephone paging capability to any Crestron Home® (CH) audio distribution system, allowing sophisticated zone-paging from any telephone to room speakers throughout the house.

Audio Signal Generator

Loaded with your own custom MP3 audio files, the CEN-TIA can be used to generate high-quality door chimes and alarm sounds, and even create unique telephone ring tones to identify known callers based on Caller ID. With memory capacity expandable up to 1 GB, the CEN-TIA can easily support several hours of full-frequency stereo audio files.

DTMF Control Interface

Use your mobile phone to remotely turn on lights, adjust air conditioning, and arm/disarm security. Using standard DTMF touch tones, the CEN-TIA affords telephone keypad control of any automation system function, providing a prompt-driven user-interface that's simple to use. The Menu Builder software tool makes it easy to set up a menu of friendly voice commands using the preloaded voice prompts, or your own custom audio files, for personalized remote control of your home or office. The CEN-TIA can also dial out to your mobile phone to alert you to an alarm condition or other system event.

 
Key Features
  • Half-duplex speakerphone with Caller ID
  • Telephone paging for multiroom audio systems
  • Custom door chime, ringer, and alarm sounds
  • Remote control access from any phone
  • Personalized voice prompts
  • Easy setup via phone or Menu Builder software
  • Single-space, half-width 19-inch rack-mountable [1]
  • Under-table mountable [1]
  • Powered via Cresnet®
  1. The ST-RMK Rack Mount Kit and UTK-1U-HALF Under-Table Mounting Kit are sold separately.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

 

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

 

Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

 

Crestron, the Crestron logo, Cresnet, and Crestron Home are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

 
Audio
  Frequency Response
(@ AUDIO OUT)		 20 Hz to 20 kHz ±0.5 dB from MP3 file or AUDIO IN sources;
300 Hz to 3 KHz -3 dB from PHONE LINE source;
300 Hz to 3 KHz -3 dB from WAV file messages
  Frequency Response (PHONE LINE) 300 Hz to 3 KHz -3 dB
  Signal/Noise Ratio 94 dB A-weighted at AUDIO OUT
  THD + N 0.05% A-weighted at AUDIO OUT
  MP3 File Support 44.1 kHz sampling rate, up to 128 Kb/s bit rate
  WAV File Support 16-bit PCM, mono, 8 kHz sampling rate
Memory
  Multimedia Memory Card 32 MB included, 1 GB maximum; stores audio files
Communications
  Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
  Phone POTS (RJ11 wired interface) supporting DTMF & Caller ID
  Cresnet® Cresnet slave mode
  USB USB device port for computer console (setup)
Connectors
  PHONE LINE 6-pin RJ11 female;
Connects to single-line POTS telephone line or analog extension port
  LAN (1) 8-pin RJ45, female;
10Base-T/100Base-TX Ethernet port
  MEMORY (1) MMC compatible card slot;
Accepts Multimedia memory card up to 1 GB (32 MB included)
  AUDIO IN (1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio input;
Input Impedance: 20k Ohms balanced, 10k Ohms unbalanced;
Maximum Input Level: 4 Vrms balanced, 2 Vrms unbalanced
  AUDIO OUT (1) 5-pin 3.5 mm detachable terminal block;
Balanced/unbalanced stereo line-level audio output;
Output Impedance: 200 Ohms balanced; 100 Ohms unbalanced;
Maximum Output Level: 4 Vrms balanced, 2 Vrms unbalanced
  NET (1) 4-pin 3.5 mm detachable terminal block;
Cresnet slave port, connects to Cresnet control network
  G (1) 6-32 screw, chassis ground lug
  USB (front) (1) USB Type B female;
USB 1.1 computer console port;
For setup only
Controls & Indicators
  PWR (1) green LED, indicates 24 Volts DC power supplied from Cresnet control network
  NET (1) yellow LED indicates communication with Cresnet system
  ACT (1) red LED, indicates internal processor activity
  OFF HOOK (1) miniature pushbutton and (1) green LED, initiates and indicates “off-hook” connection to phone line
  LAN LINK (1) green LED, indicates Ethernet link status
  LAN ACT (1) yellow LED, indicates Ethernet activity
  LAN (rear) (1) green and (1) amber LEDs, green indicates Ethernet link status, amber indicates Ethernet activity
  SETUP (rear) (1) miniature pushbutton and (1) red LED, used for touch-settable ID (TSID)
Power Requirements
  Cresnet Power Usage 7 Watts (0.3 Amp @ 24 Volts DC)
Environmental
  Temperature 32° to 122° F (0° to 50° C)
  Humidity 10% to 90% RH (non-condensing)
Enclosure
  Chassis Steel, black finish
  Front Panel Metal, black finish with polycarbonate label overlay
  Mounting Freestanding, under-table mountable, or 1RU half-width 19-inch rack-mountable (adhesive feet included, under-table and rack mounting kits sold separately)
Dimensions
  Height 1.70 in (44 mm);
1.80 in (46 mm) with feet
  Width 7.07 in (180 mm)
  Depth 6.37 in (162 mm)
Weight
  1.8 lb (0.9 kg)
Click here to search product certificates.
  1. The ST-RMK Rack Mount Kit and UTK-1U-HALF Under-Table Mounting Kit are sold separately.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

 

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

 

Certain Crestron products contain open source software. For specific information, please visit www.crestron.com/opensource.

 

Crestron, the Crestron logo, Cresnet, and Crestron Home are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2015 Crestron Electronics, Inc.

Pricing Region Select
Please select your region below to see the appropriate Advertised Pricing.