Crestron Electronics, Inc.
Home  |   Sitemap  |   Online Help  |   International Websites
Company InformationProductsTools and ResourcesPartnerships and ProgramsTrainingContacts and LinksPress RoomTrue Blue Support
company_informationMy Crestron
Printer Friendly Email This Page Not Available

>> Home > Company Information > Directions > Directions to Corporate Headquarters

Directions to Corporate Headquarters

Address:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
Tel: 201.767.3400
Fax: 201.767.7576

Map this location

Direction to the address above can be found below
 

From North (Upstate NY or Tappan Zee Bridge)

 

From East (George Washington Bridge)

 

From South (Garden State Parkway)

 

From South (NJ Turnpike)

 

From West (Rt. 4)

 

From West (Rt. 80)

 

From Newark Airport

 

From JFK Airport

 

From LaGuardia Airport

   
From North (Upstate NY or Tappan Zee Bridge)
 

1) Take THRUWAY into NJ to the PALISADES INTERSTE PARKWAY SOUTH.
2) Take PALISADES INTERSTATE PARKWAY SOUTH to exit 5S (Tappan/Orangeburg Rt. 303).
3) Make a right turn, onto Rt 303.
4) Go to second traffic light (Oak Tree Rd) make a left.
5) Go to first traffic light (Rt 340) make right.
6) Go 1/4mi to Rockleigh Industrial Park on right.
7) Make a right onto King Rd.
8) Continue to end and make a right onto Volvo Drive. This road bends to the left and then to the right. Proceed past our new manufacturing facility (building #6) and you will see our Corporate Headquarters - the last building on the left(#15).

   
From East (George Washington Bridge)
 

1) Take UPPER level of bridge into NJ and stay in the RIGHT lane.
2) Take the first exit off the bridge onto the PALISADES INTERSTATE PARKWAY NORTH.
3) Take the PALISADES INTERSTATE PARKWAY NORTH to Exit 4.
4) Go down ramp to traffic light, make left onto Rt. 9W NORTH.
5) At first traffic light (Oak Tree Rd) make left.
6) Go to next traffic light (Rt 340), make left.
7) Go 1/4mi to Rockleigh Industrial Park on right.
8) Make a right onto King Rd.
9) Continue to end and make a right onto Volvo Drive. This road bends to the left and then to the right. Proceed past our new manufacturing facility (building #6) and you will see our Corporate Headquarters - the last building on the left(#15).

   
From South (Garden State Parkway)
 

1) Take GARDEN STATE PARKWAY NORTH to exit 161 (Paramus/Rt 4 East)
2) Take Rt. 4 EAST LOCAL (towards George Washington Bridge, approx 10-15min) to LAST EXIT IN NJ—FORT LEE/PALISADES PARKWAY
3) Take the PALISADES INTERSTATE PARKWAY NORTH to Exit 4.
4) Go down ramp to traffic light, make left onto Rt. 9W NORTH.
5) At first traffic light (Oak Tree Rd) make left.
6) Go to next traffic light (Rt 340), make left.
7) Go 1/4mi to Rockleigh Industrial Park on right.
8) Make a right onto King Rd.
9) Continue to end and make a right onto Volvo Drive. This road bends to the left and then to the right. Proceed past our new manufacturing facility (building #6) and you will see our Corporate Headquarters - the last building on the left(#15).

   
From South (NJ Turnpike)
 

1) NJ TURNPIKE NORTH to exit 18(E or W).
2) After toll, take local road I-95 NORTH (towards George Washington Bridge) to last exit in NJ—FORT LEE/PALISADES PARKWAY.
3) Take the PALISADES INTERSTATE PARKWAY NORTH to Exit 4.
4) Go down ramp to traffic light, make left onto Rt. 9W NORTH.
5) At first traffic light (Oak Tree Rd) make left.
6) Go to next traffic light (Rt 340), make left.
7) Go 1/4mi to Rockleigh Industrial Park on right.
8) Make a right onto King Rd.
9) Continue to end and make a right onto Volvo Drive. This road bends to the left and then to the right. Proceed past our new manufacturing facility (building #6) and you will see our Corporate Headquarters - the last building on the left(#15).

   
From West (Rt. 4)
 

From Rt. 4

1) Take Rt. 4 EAST LOCAL (towards George Washington Bridge) to last exit in NJ—FORT LEE/PALISADES PARKWAY.
2) Take the PALISADES INTERSTATE PARKWAY NORTH to Exit 4.
3) Go down ramp to traffic light, make left onto Rt. 9W NORTH.
4) At first traffic light (Oak Tree Rd) make left.
5) Go to next traffic light (Rt 340), make left.
6) Go 1/4mi to Rockleigh Industrial Park on right.
7) Make a right onto King Rd.
8) Continue to end and make a right onto Volvo Drive. This road bends to the left and then to the right. Proceed past our new manufacturing facility (building #6) and you will see our Corporate Headquarters - the last building on the left(#15).

   
From West (Rt. 80)
 

1) Take Rt. 80 EAST LOCAL (towards George Washington Bridge) to last exit in NJ—FORT LEE/PALISADES PARKWAY.
2) Take the PALISADES INTERSTATE PARKWAY NORTH to Exit 4.
3) Go down ramp to traffic light, make left onto Rt. 9W NORTH.
4) At first traffic light (Oak Tree Rd) make left.
5) Go to first traffic light (Rt 340), make left.
6) Go 1/4mi to Rockleigh Industrial Park on right.
7) Make a right onto King Rd.
8) Continue to end and make a right onto Volvo Drive. This road bends to the left and then to the right. Proceed past our new manufacturing facility (building #6) and you will see our Corporate Headquarters - the last building on the left(#15).

   
From Newark Airport
 

1) Exit the airport onto NJ TURNPIKE NORTH
2) NJ TURNPIKE NORTH to exit 18(E or W).
3) After toll, take local road I-95 NORTH (towards George Washington Bridge) to last exit in NJ—FORT LEE/PALISADES PARKWAY.
4) Take the PALISADES INTERSTATE PARKWAY NORTH to Exit 4.
5) Go down ramp to traffic light, make left onto Rt. 9W NORTH.
6) At first traffic light (Oak Tree Rd) make left.
7) Go to next traffic light (Rt 340), make left.
8) Go 1/4mi to Rockleigh Industrial Park on right.
9) Make a right onto King Rd.
10) Continue to end and make a right onto Volvo Drive. This road bends to the left and then to the right. Proceed past our new manufacturing facility (building #6) and you will see our Corporate Headquarters - the last building on the left(#15).

   
From JFK Airport
 

1) Exit the Airport onto the VAN WYCK EXPRESSWAY NORTH. Follow signs to the GRAND CENTRAL PARKWAY WEST (towards New York City) then follow signs onto the TRIBORO BRIDGE.
2) Go over bridge and stay in the RIGHT lane—exit immediately onto the access road for the HARLEM RIVER DRIVE (also may be called the EAST SIDE DRIVE).
3) Follow signs for the GEORGE WASHINGTON BRIDGE.
4) Take UPPER level of bridge and stay in the RIGHT lane.
5) Take the first exit off the bridge onto the PALISADES INTERSTATE PARKWAY NORTH.
6) Take the PALISADES INTERSTATE PARKWAY NORTH to Exit 4.
7) Go down ramp to traffic light, make left onto Rt. 9W NORTH.
8) At first traffic light (Oak Tree Rd) make left.
9) Go to next traffic light (Rt 340), make left.
10) Go 1/4mi to Rockleigh Industrial Park on right.
11) Make a right onto King Rd.
12) Continue to end and make a right onto Volvo Drive. This road bends to the left and then to the right. Proceed past our new manufacturing facility (building #6) and you will see our Corporate Headquarters - the last building on the left(#15).

   
From LaGuardia Airport
 

1) Exit the Airport and follow signs to the GRAND CENTRAL PARKWAY WEST (towards New York City) then follow signs onto the TRIBORO BRIDGE.
2) Go over bridge and stay in the RIGHT lane—exit immediately onto the access road for the HARLEM RIVER DRIVE (also may be called the EAST SIDE DRIVE).
3) Follow signs for the GEORGE WASHINGTON BRIDGE.
4) Take UPPER level of bridge and stay in the RIGHT lane.
5) Take the first exit off the bridge onto the PALISADES INTERSTATE PARKWAY NORTH.
6) Take the PALISADES INTERSTATE PARKWAY NORTH to Exit 4.
7) Go down ramp to traffic light, make left onto Rt. 9W NORTH.
8) At first traffic light (Oak Tree Rd) make left.
9) Go to next traffic light (Rt 340), make left.
10) Go 1/4mi to Rockleigh Industrial Park on right.
11) Make a right onto King Rd.
12) Continue to end and make a right onto Volvo Drive. This road bends to the left and then to the right. Proceed past our new manufacturing facility (building #6) and you will see our Corporate Headquarters - the last building on the left(#15).

   

Log In



Forgot Password?
Remember Me

Create an Account

My Crestron delivers important announcements and messages tailored to what type of user you are. It is also required for Authorized Crestron Dealers, International Dealers, Consultants, CAIP Members, A+ Partners, Government Partners and other Crestron partners to gain access to restricted areas of this website.

Click here to create an account
© 2008 Crestron Electronics, Inc. All rights reserved Terms of Use | Trademarks | Privacy | Legal | Feedback